From: Florian Fainelli f.fainelli@gmail.com
[ Upstream commit 5fc0f21246e50afdf318b5a3a941f7f4f57b8947 ]
Since it became possible for the DSA core to use a CPU port different than 8, our bcm_sf2_imp_setup() function was broken because it assumes that registers are applicable to port 8. In particular, the port's MAC is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS bits if we are not configured for port 8.
Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/dsa/bcm_sf2.c | 36 +++++++++++++++++++++--------------- 1 file changed, 21 insertions(+), 15 deletions(-)
--- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -106,22 +106,11 @@ static void bcm_sf2_imp_setup(struct dsa unsigned int i; u32 reg, offset;
- if (priv->type == BCM7445_DEVICE_ID) - offset = CORE_STS_OVERRIDE_IMP; - else - offset = CORE_STS_OVERRIDE_IMP2; - /* Enable the port memories */ reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL); reg &= ~P_TXQ_PSM_VDD(port); core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
- /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ - reg = core_readl(priv, CORE_IMP_CTL); - reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN); - reg &= ~(RX_DIS | TX_DIS); - core_writel(priv, reg, CORE_IMP_CTL); - /* Enable forwarding */ core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
@@ -140,10 +129,27 @@ static void bcm_sf2_imp_setup(struct dsa
bcm_sf2_brcm_hdr_setup(priv, port);
- /* Force link status for IMP port */ - reg = core_readl(priv, offset); - reg |= (MII_SW_OR | LINK_STS); - core_writel(priv, reg, offset); + if (port == 8) { + if (priv->type == BCM7445_DEVICE_ID) + offset = CORE_STS_OVERRIDE_IMP; + else + offset = CORE_STS_OVERRIDE_IMP2; + + /* Force link status for IMP port */ + reg = core_readl(priv, offset); + reg |= (MII_SW_OR | LINK_STS); + core_writel(priv, reg, offset); + + /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */ + reg = core_readl(priv, CORE_IMP_CTL); + reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN); + reg &= ~(RX_DIS | TX_DIS); + core_writel(priv, reg, CORE_IMP_CTL); + } else { + reg = core_readl(priv, CORE_G_PCTL_PORT(port)); + reg &= ~(RX_DIS | TX_DIS); + core_writel(priv, reg, CORE_G_PCTL_PORT(port)); + } }
static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)