6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit f15176b8b6e72ac30e14fd273282d2b72562d26b ]
When the kernel is compiled without LED framework support the rtl8366rb fails to build like this:
rtl8366rb.o: in function `rtl8366rb_setup_led': rtl8366rb.c:953:(.text.unlikely.rtl8366rb_setup_led+0xe8): undefined reference to `led_init_default_state_get' rtl8366rb.c:980:(.text.unlikely.rtl8366rb_setup_led+0x240): undefined reference to `devm_led_classdev_register_ext'
As this is constantly coming up in different randconfig builds, bite the bullet and create a separate file for the offending code, split out a header with all stuff needed both in the core driver and the leds code.
Add a new bool Kconfig option for the LED compile target, such that it depends on LEDS_CLASS=y || LEDS_CLASS=RTL8366RB which make LED support always available when LEDS_CLASS is compiled into the kernel and enforce that if the LEDS_CLASS is a module, then the RTL8366RB driver needs to be a module as well so that modprobe can resolve the dependencies.
Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb") Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202502070525.xMUImayb-lkp@intel.com/ Signed-off-by: Linus Walleij linus.walleij@linaro.org Reviewed-by: Vladimir Oltean olteanv@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/realtek/Kconfig | 6 + drivers/net/dsa/realtek/Makefile | 3 + drivers/net/dsa/realtek/rtl8366rb-leds.c | 177 ++++++++++++++++ drivers/net/dsa/realtek/rtl8366rb.c | 258 +---------------------- drivers/net/dsa/realtek/rtl8366rb.h | 107 ++++++++++ 5 files changed, 299 insertions(+), 252 deletions(-) create mode 100644 drivers/net/dsa/realtek/rtl8366rb-leds.c create mode 100644 drivers/net/dsa/realtek/rtl8366rb.h
diff --git a/drivers/net/dsa/realtek/Kconfig b/drivers/net/dsa/realtek/Kconfig index 6989972eebc30..10687722d14c0 100644 --- a/drivers/net/dsa/realtek/Kconfig +++ b/drivers/net/dsa/realtek/Kconfig @@ -43,4 +43,10 @@ config NET_DSA_REALTEK_RTL8366RB help Select to enable support for Realtek RTL8366RB.
+config NET_DSA_REALTEK_RTL8366RB_LEDS + bool "Support RTL8366RB LED control" + depends on (LEDS_CLASS=y || LEDS_CLASS=NET_DSA_REALTEK_RTL8366RB) + depends on NET_DSA_REALTEK_RTL8366RB + default NET_DSA_REALTEK_RTL8366RB + endif diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile index 35491dc20d6d6..17367bcba496c 100644 --- a/drivers/net/dsa/realtek/Makefile +++ b/drivers/net/dsa/realtek/Makefile @@ -12,4 +12,7 @@ endif
obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o rtl8366-objs := rtl8366-core.o rtl8366rb.o +ifdef CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS +rtl8366-objs += rtl8366rb-leds.o +endif obj-$(CONFIG_NET_DSA_REALTEK_RTL8365MB) += rtl8365mb.o diff --git a/drivers/net/dsa/realtek/rtl8366rb-leds.c b/drivers/net/dsa/realtek/rtl8366rb-leds.c new file mode 100644 index 0000000000000..99c890681ae60 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl8366rb-leds.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <net/dsa.h> +#include "rtl83xx.h" +#include "rtl8366rb.h" + +static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port) +{ + switch (led_group) { + case 0: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 1: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 2: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + case 3: + return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); + default: + return 0; + } +} + +static int rb8366rb_get_port_led(struct rtl8366rb_led *led) +{ + struct realtek_priv *priv = led->priv; + u8 led_group = led->led_group; + u8 port_num = led->port_num; + int ret; + u32 val; + + ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group), + &val); + if (ret) { + dev_err(priv->dev, "error reading LED on port %d group %d\n", + led_group, port_num); + return ret; + } + + return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num)); +} + +static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable) +{ + struct realtek_priv *priv = led->priv; + u8 led_group = led->led_group; + u8 port_num = led->port_num; + int ret; + + ret = regmap_update_bits(priv->map, + RTL8366RB_LED_X_X_CTRL_REG(led_group), + rtl8366rb_led_group_port_mask(led_group, + port_num), + enable ? 0xffff : 0); + if (ret) { + dev_err(priv->dev, "error updating LED on port %d group %d\n", + led_group, port_num); + return ret; + } + + /* Change the LED group to manual controlled LEDs if required */ + ret = rb8366rb_set_ledgroup_mode(priv, led_group, + RTL8366RB_LEDGROUP_FORCE); + + if (ret) { + dev_err(priv->dev, "error updating LED GROUP group %d\n", + led_group); + return ret; + } + + return 0; +} + +static int +rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev, + enum led_brightness brightness) +{ + struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led, + cdev); + + return rb8366rb_set_port_led(led, brightness == LED_ON); +} + +static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp, + struct fwnode_handle *led_fwnode) +{ + struct rtl8366rb *rb = priv->chip_data; + struct led_init_data init_data = { }; + enum led_default_state state; + struct rtl8366rb_led *led; + u32 led_group; + int ret; + + ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group); + if (ret) + return ret; + + if (led_group >= RTL8366RB_NUM_LEDGROUPS) { + dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", + led_group, dp->index); + return -EINVAL; + } + + led = &rb->leds[dp->index][led_group]; + led->port_num = dp->index; + led->led_group = led_group; + led->priv = priv; + + state = led_init_default_state_get(led_fwnode); + switch (state) { + case LEDS_DEFSTATE_ON: + led->cdev.brightness = 1; + rb8366rb_set_port_led(led, 1); + break; + case LEDS_DEFSTATE_KEEP: + led->cdev.brightness = + rb8366rb_get_port_led(led); + break; + case LEDS_DEFSTATE_OFF: + default: + led->cdev.brightness = 0; + rb8366rb_set_port_led(led, 0); + } + + led->cdev.max_brightness = 1; + led->cdev.brightness_set_blocking = + rtl8366rb_cled_brightness_set_blocking; + init_data.fwnode = led_fwnode; + init_data.devname_mandatory = true; + + init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d", + dp->ds->index, dp->index, led_group); + if (!init_data.devicename) + return -ENOMEM; + + ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data); + if (ret) { + dev_warn(priv->dev, "Failed to init LED %d for port %d", + led_group, dp->index); + return ret; + } + + return 0; +} + +int rtl8366rb_setup_leds(struct realtek_priv *priv) +{ + struct dsa_switch *ds = &priv->ds; + struct device_node *leds_np; + struct dsa_port *dp; + int ret = 0; + + dsa_switch_for_each_port(dp, ds) { + if (!dp->dn) + continue; + + leds_np = of_get_child_by_name(dp->dn, "leds"); + if (!leds_np) { + dev_dbg(priv->dev, "No leds defined for port %d", + dp->index); + continue; + } + + for_each_child_of_node_scoped(leds_np, led_np) { + ret = rtl8366rb_setup_led(priv, dp, + of_fwnode_handle(led_np)); + if (ret) + break; + } + + of_node_put(leds_np); + if (ret) + return ret; + } + return 0; +} diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index c7a8cd0605878..ae3d49fc22b80 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -26,11 +26,7 @@ #include "realtek-smi.h" #include "realtek-mdio.h" #include "rtl83xx.h" - -#define RTL8366RB_PORT_NUM_CPU 5 -#define RTL8366RB_NUM_PORTS 6 -#define RTL8366RB_PHY_NO_MAX 4 -#define RTL8366RB_PHY_ADDR_MAX 31 +#include "rtl8366rb.h"
/* Switch Global Configuration register */ #define RTL8366RB_SGCR 0x0000 @@ -175,39 +171,6 @@ */ #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
-/* LED control registers */ -/* The LED blink rate is global; it is used by all triggers in all groups. */ -#define RTL8366RB_LED_BLINKRATE_REG 0x0430 -#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 -#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 -#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 -#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 -#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 -#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 -#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 - -/* LED trigger event for each group */ -#define RTL8366RB_LED_CTRL_REG 0x0431 -#define RTL8366RB_LED_CTRL_OFFSET(led_group) \ - (4 * (led_group)) -#define RTL8366RB_LED_CTRL_MASK(led_group) \ - (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group)) - -/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only - * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is - * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored. - */ -#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 -#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 -#define RTL8366RB_LED_X_X_CTRL_REG(led_group) \ - ((led_group) <= 1 ? \ - RTL8366RB_LED_0_1_CTRL_REG : \ - RTL8366RB_LED_2_3_CTRL_REG) -#define RTL8366RB_LED_0_X_CTRL_MASK GENMASK(5, 0) -#define RTL8366RB_LED_X_1_CTRL_MASK GENMASK(11, 6) -#define RTL8366RB_LED_2_X_CTRL_MASK GENMASK(5, 0) -#define RTL8366RB_LED_X_3_CTRL_MASK GENMASK(11, 6) - #define RTL8366RB_MIB_COUNT 33 #define RTL8366RB_GLOBAL_MIB_COUNT 1 #define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 @@ -243,7 +206,6 @@ #define RTL8366RB_PORT_STATUS_AN_MASK 0x0080
#define RTL8366RB_NUM_VLANS 16 -#define RTL8366RB_NUM_LEDGROUPS 4 #define RTL8366RB_NUM_VIDS 4096 #define RTL8366RB_PRIORITYMAX 7 #define RTL8366RB_NUM_FIDS 8 @@ -350,46 +312,6 @@ #define RTL8366RB_GREEN_FEATURE_TX BIT(0) #define RTL8366RB_GREEN_FEATURE_RX BIT(2)
-enum rtl8366_ledgroup_mode { - RTL8366RB_LEDGROUP_OFF = 0x0, - RTL8366RB_LEDGROUP_DUP_COL = 0x1, - RTL8366RB_LEDGROUP_LINK_ACT = 0x2, - RTL8366RB_LEDGROUP_SPD1000 = 0x3, - RTL8366RB_LEDGROUP_SPD100 = 0x4, - RTL8366RB_LEDGROUP_SPD10 = 0x5, - RTL8366RB_LEDGROUP_SPD1000_ACT = 0x6, - RTL8366RB_LEDGROUP_SPD100_ACT = 0x7, - RTL8366RB_LEDGROUP_SPD10_ACT = 0x8, - RTL8366RB_LEDGROUP_SPD100_10_ACT = 0x9, - RTL8366RB_LEDGROUP_FIBER = 0xa, - RTL8366RB_LEDGROUP_AN_FAULT = 0xb, - RTL8366RB_LEDGROUP_LINK_RX = 0xc, - RTL8366RB_LEDGROUP_LINK_TX = 0xd, - RTL8366RB_LEDGROUP_MASTER = 0xe, - RTL8366RB_LEDGROUP_FORCE = 0xf, - - __RTL8366RB_LEDGROUP_MODE_MAX -}; - -struct rtl8366rb_led { - u8 port_num; - u8 led_group; - struct realtek_priv *priv; - struct led_classdev cdev; -}; - -/** - * struct rtl8366rb - RTL8366RB-specific data - * @max_mtu: per-port max MTU setting - * @pvid_enabled: if PVID is set for respective port - * @leds: per-port and per-ledgroup led info - */ -struct rtl8366rb { - unsigned int max_mtu[RTL8366RB_NUM_PORTS]; - bool pvid_enabled[RTL8366RB_NUM_PORTS]; - struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS]; -}; - static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { { 0, 0, 4, "IfInOctets" }, { 0, 4, 4, "EtherStatsOctets" }, @@ -830,9 +752,10 @@ static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table, return 0; }
-static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, - u8 led_group, - enum rtl8366_ledgroup_mode mode) +/* This code is used also with LEDs disabled */ +int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, + u8 led_group, + enum rtl8366_ledgroup_mode mode) { int ret; u32 val; @@ -849,144 +772,7 @@ static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, return 0; }
-static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port) -{ - switch (led_group) { - case 0: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 1: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 2: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - case 3: - return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port)); - default: - return 0; - } -} - -static int rb8366rb_get_port_led(struct rtl8366rb_led *led) -{ - struct realtek_priv *priv = led->priv; - u8 led_group = led->led_group; - u8 port_num = led->port_num; - int ret; - u32 val; - - ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group), - &val); - if (ret) { - dev_err(priv->dev, "error reading LED on port %d group %d\n", - led_group, port_num); - return ret; - } - - return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num)); -} - -static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable) -{ - struct realtek_priv *priv = led->priv; - u8 led_group = led->led_group; - u8 port_num = led->port_num; - int ret; - - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_X_X_CTRL_REG(led_group), - rtl8366rb_led_group_port_mask(led_group, - port_num), - enable ? 0xffff : 0); - if (ret) { - dev_err(priv->dev, "error updating LED on port %d group %d\n", - led_group, port_num); - return ret; - } - - /* Change the LED group to manual controlled LEDs if required */ - ret = rb8366rb_set_ledgroup_mode(priv, led_group, - RTL8366RB_LEDGROUP_FORCE); - - if (ret) { - dev_err(priv->dev, "error updating LED GROUP group %d\n", - led_group); - return ret; - } - - return 0; -} - -static int -rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev, - enum led_brightness brightness) -{ - struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led, - cdev); - - return rb8366rb_set_port_led(led, brightness == LED_ON); -} - -static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp, - struct fwnode_handle *led_fwnode) -{ - struct rtl8366rb *rb = priv->chip_data; - struct led_init_data init_data = { }; - enum led_default_state state; - struct rtl8366rb_led *led; - u32 led_group; - int ret; - - ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group); - if (ret) - return ret; - - if (led_group >= RTL8366RB_NUM_LEDGROUPS) { - dev_warn(priv->dev, "Invalid LED reg %d defined for port %d", - led_group, dp->index); - return -EINVAL; - } - - led = &rb->leds[dp->index][led_group]; - led->port_num = dp->index; - led->led_group = led_group; - led->priv = priv; - - state = led_init_default_state_get(led_fwnode); - switch (state) { - case LEDS_DEFSTATE_ON: - led->cdev.brightness = 1; - rb8366rb_set_port_led(led, 1); - break; - case LEDS_DEFSTATE_KEEP: - led->cdev.brightness = - rb8366rb_get_port_led(led); - break; - case LEDS_DEFSTATE_OFF: - default: - led->cdev.brightness = 0; - rb8366rb_set_port_led(led, 0); - } - - led->cdev.max_brightness = 1; - led->cdev.brightness_set_blocking = - rtl8366rb_cled_brightness_set_blocking; - init_data.fwnode = led_fwnode; - init_data.devname_mandatory = true; - - init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d", - dp->ds->index, dp->index, led_group); - if (!init_data.devicename) - return -ENOMEM; - - ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data); - if (ret) { - dev_warn(priv->dev, "Failed to init LED %d for port %d", - led_group, dp->index); - return ret; - } - - return 0; -} - +/* This code is used also with LEDs disabled */ static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv) { int ret = 0; @@ -1007,38 +793,6 @@ static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv) return ret; }
-static int rtl8366rb_setup_leds(struct realtek_priv *priv) -{ - struct dsa_switch *ds = &priv->ds; - struct device_node *leds_np; - struct dsa_port *dp; - int ret = 0; - - dsa_switch_for_each_port(dp, ds) { - if (!dp->dn) - continue; - - leds_np = of_get_child_by_name(dp->dn, "leds"); - if (!leds_np) { - dev_dbg(priv->dev, "No leds defined for port %d", - dp->index); - continue; - } - - for_each_child_of_node_scoped(leds_np, led_np) { - ret = rtl8366rb_setup_led(priv, dp, - of_fwnode_handle(led_np)); - if (ret) - break; - } - - of_node_put(leds_np); - if (ret) - return ret; - } - return 0; -} - static int rtl8366rb_setup(struct dsa_switch *ds) { struct realtek_priv *priv = ds->priv; diff --git a/drivers/net/dsa/realtek/rtl8366rb.h b/drivers/net/dsa/realtek/rtl8366rb.h new file mode 100644 index 0000000000000..685ff3275faa1 --- /dev/null +++ b/drivers/net/dsa/realtek/rtl8366rb.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _RTL8366RB_H +#define _RTL8366RB_H + +#include "realtek.h" + +#define RTL8366RB_PORT_NUM_CPU 5 +#define RTL8366RB_NUM_PORTS 6 +#define RTL8366RB_PHY_NO_MAX 4 +#define RTL8366RB_NUM_LEDGROUPS 4 +#define RTL8366RB_PHY_ADDR_MAX 31 + +/* LED control registers */ +/* The LED blink rate is global; it is used by all triggers in all groups. */ +#define RTL8366RB_LED_BLINKRATE_REG 0x0430 +#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 +#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 +#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 +#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 +#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 +#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 +#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 + +/* LED trigger event for each group */ +#define RTL8366RB_LED_CTRL_REG 0x0431 +#define RTL8366RB_LED_CTRL_OFFSET(led_group) \ + (4 * (led_group)) +#define RTL8366RB_LED_CTRL_MASK(led_group) \ + (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group)) + +/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only + * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is + * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored. + */ +#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 +#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 +#define RTL8366RB_LED_X_X_CTRL_REG(led_group) \ + ((led_group) <= 1 ? \ + RTL8366RB_LED_0_1_CTRL_REG : \ + RTL8366RB_LED_2_3_CTRL_REG) +#define RTL8366RB_LED_0_X_CTRL_MASK GENMASK(5, 0) +#define RTL8366RB_LED_X_1_CTRL_MASK GENMASK(11, 6) +#define RTL8366RB_LED_2_X_CTRL_MASK GENMASK(5, 0) +#define RTL8366RB_LED_X_3_CTRL_MASK GENMASK(11, 6) + +enum rtl8366_ledgroup_mode { + RTL8366RB_LEDGROUP_OFF = 0x0, + RTL8366RB_LEDGROUP_DUP_COL = 0x1, + RTL8366RB_LEDGROUP_LINK_ACT = 0x2, + RTL8366RB_LEDGROUP_SPD1000 = 0x3, + RTL8366RB_LEDGROUP_SPD100 = 0x4, + RTL8366RB_LEDGROUP_SPD10 = 0x5, + RTL8366RB_LEDGROUP_SPD1000_ACT = 0x6, + RTL8366RB_LEDGROUP_SPD100_ACT = 0x7, + RTL8366RB_LEDGROUP_SPD10_ACT = 0x8, + RTL8366RB_LEDGROUP_SPD100_10_ACT = 0x9, + RTL8366RB_LEDGROUP_FIBER = 0xa, + RTL8366RB_LEDGROUP_AN_FAULT = 0xb, + RTL8366RB_LEDGROUP_LINK_RX = 0xc, + RTL8366RB_LEDGROUP_LINK_TX = 0xd, + RTL8366RB_LEDGROUP_MASTER = 0xe, + RTL8366RB_LEDGROUP_FORCE = 0xf, + + __RTL8366RB_LEDGROUP_MODE_MAX +}; + +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS) + +struct rtl8366rb_led { + u8 port_num; + u8 led_group; + struct realtek_priv *priv; + struct led_classdev cdev; +}; + +int rtl8366rb_setup_leds(struct realtek_priv *priv); + +#else + +static inline int rtl8366rb_setup_leds(struct realtek_priv *priv) +{ + return 0; +} + +#endif /* IS_ENABLED(CONFIG_LEDS_CLASS) */ + +/** + * struct rtl8366rb - RTL8366RB-specific data + * @max_mtu: per-port max MTU setting + * @pvid_enabled: if PVID is set for respective port + * @leds: per-port and per-ledgroup led info + */ +struct rtl8366rb { + unsigned int max_mtu[RTL8366RB_NUM_PORTS]; + bool pvid_enabled[RTL8366RB_NUM_PORTS]; +#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB_LEDS) + struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS]; +#endif +}; + +/* This code is used also with LEDs disabled */ +int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv, + u8 led_group, + enum rtl8366_ledgroup_mode mode); + +#endif /* _RTL8366RB_H */