6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rengarajan S rengarajan.s@microchip.com
[ Upstream commit c40b91e38eb8d4489def095d62ab476d45871323 ]
Systems that issue PCIe hot reset requests during a suspend/resume cycle cause PCI1XXXX device revisions prior to C0 to get its UART configuration registers reset to hardware default values. This results in device inaccessibility and data transfer failures. Starting with Revision C0, support was added in the device hardware (via the Hot Reset Disable Bit) to allow resetting only the PCIe interface and its associated logic, but preserving the UART configuration during a hot reset. This patch enables the hot reset disable feature during suspend/ resume for C0 and later revisions of the device.
Signed-off-by: Rengarajan S rengarajan.s@microchip.com Reviewed-by: Jiri Slaby jirislaby@kernel.org Link: https://lore.kernel.org/r/20250425145500.29036-1-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/8250/8250_pci1xxxx.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c index e9c51d4e447dd..4c149db846925 100644 --- a/drivers/tty/serial/8250/8250_pci1xxxx.c +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -115,6 +115,7 @@
#define UART_RESET_REG 0x94 #define UART_RESET_D3_RESET_DISABLE BIT(16) +#define UART_RESET_HOT_RESET_DISABLE BIT(17)
#define UART_BURST_STATUS_REG 0x9C #define UART_TX_BURST_FIFO 0xA0 @@ -620,6 +621,10 @@ static int pci1xxxx_suspend(struct device *dev) }
data = readl(p + UART_RESET_REG); + + if (priv->dev_rev >= 0xC0) + data |= UART_RESET_HOT_RESET_DISABLE; + writel(data | UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG);
if (wakeup) @@ -647,7 +652,12 @@ static int pci1xxxx_resume(struct device *dev) }
data = readl(p + UART_RESET_REG); + + if (priv->dev_rev >= 0xC0) + data &= ~UART_RESET_HOT_RESET_DISABLE; + writel(data & ~UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG); + iounmap(p);
for (i = 0; i < priv->nr; i++) {