From: Da Xue da@libre.computer
This bit is necessary to enable packets on the interface. Without this bit set, ethernet behaves as if it is working, but no activity occurs.
The vendor SDK sets this bit along with the PHY_ID bits. U-boot also sets this bit, but if u-boot is not compiled with networking support the interface will not work.
Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support"); Signed-off-by: Da Xue da@libre.computer Signed-off-by: Christian Hewitt christianshewitt@gmail.com --- Resending on behalf of Da Xue who has email sending issues. Changes since v1 [0]: - Remove blank line between Fixes and SoB tags - Submit without mail server mangling the patch - Minor tweaks to subject line and commit message - CC to stable@vger.kernel.org
[0] https://patchwork.kernel.org/project/linux-amlogic/patch/CACqvRUbx-KsrMwCHYQ...
drivers/net/mdio/mdio-mux-meson-gxl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/mdio/mdio-mux-meson-gxl.c b/drivers/net/mdio/mdio-mux-meson-gxl.c index 00c66240136b..fc5883387718 100644 --- a/drivers/net/mdio/mdio-mux-meson-gxl.c +++ b/drivers/net/mdio/mdio-mux-meson-gxl.c @@ -17,6 +17,7 @@ #define REG2_LEDACT GENMASK(23, 22) #define REG2_LEDLINK GENMASK(25, 24) #define REG2_DIV4SEL BIT(27) +#define REG2_RESERVED_28 BIT(28) #define REG2_ADCBYPASS BIT(30) #define REG2_CLKINSEL BIT(31) #define ETH_REG3 0x4 @@ -65,7 +66,7 @@ static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv) * The only constraint is that it must match the one in * drivers/net/phy/meson-gxl.c to properly match the PHY. */ - writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), + writel(REG2_RESERVED_28 | FIELD_PREP(REG2_PHYID, EPHY_GXL_ID), priv->regs + ETH_REG2);
/* Enable the internal phy */