From: Kornel Dulęba korneld@chromium.org
commit 0cf9e48ff22e15f3f0882991f33d23ccc5ae1d01 upstream.
Leverage gpiochip_line_is_irq to check whether a pin has an irq associated with it. The previous check ("irq == 0") didn't make much sense. The irq variable refers to the pinctrl irq, and has nothing do to with an individual pin.
On some systems, during suspend/resume cycle, the firmware leaves an interrupt enabled on a pin that is not used by the kernel. Without this patch that caused an interrupt storm.
Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315 Signed-off-by: Kornel Dulęba korneld@chromium.org Reviewed-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20230421120625.3366-4-mario.limonciello@amd.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pinctrl/pinctrl-amd.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -653,21 +653,21 @@ static bool do_amd_gpio_irq_handler(int * We must read the pin register again, in case the * value was changed while executing * generic_handle_domain_irq() above. - * If we didn't find a mapping for the interrupt, - * disable it in order to avoid a system hang caused - * by an interrupt storm. + * If the line is not an irq, disable it in order to + * avoid a system hang caused by an interrupt storm. */ raw_spin_lock_irqsave(&gpio_dev->lock, flags); regval = readl(regs + i); - if (irq == 0) { - regval &= ~BIT(INTERRUPT_ENABLE_OFF); + if (!gpiochip_line_is_irq(gc, irqnr + i)) { + regval &= ~BIT(INTERRUPT_MASK_OFF); dev_dbg(&gpio_dev->pdev->dev, "Disabling spurious GPIO IRQ %d\n", irqnr + i); + } else { + ret = true; } writel(regval, regs + i); raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); - ret = true; } } /* did not cause wake on resume context for shared IRQ */