Hi Peter,
What about this patch? Can you push it?
Regards, Pawel
On Tue, Nov 15, 2022 at 6:01 PM Pawel Laszczak pawell@cadence.com wrote:
After doorbell DMA fetches the TRB. If during dequeuing request driver changes NORMAL TRB to LINK TRB but doesn't delete it from controller cache then controller will handle cached TRB and packet can be
lost.
The example scenario for this issue looks like:
- queue request - set doorbell
- dequeue request
- send OUT data packet from host
- Device will accept this packet which is unexpected 5. queue new
request - set doorbell 6. Device lost the expected packet.
By setting DFLUSH controller clears DRDY bit and stop DMA transfer.
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak pawell@cadence.com
drivers/usb/cdns3/cdns3-gadget.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 5adcb349718c..ccfaebca6faa 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -2614,6 +2614,7 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep, u8 req_on_hw_ring = 0; unsigned long flags; int ret = 0;
int val; if (!ep || !request || !ep->desc) return -EINVAL;@@ -2649,6 +2650,13 @@ int cdns3_gadget_ep_dequeue(struct usb_ep
*ep,
/* Update ring only if removed request is on pending_req_list list */ if (req_on_hw_ring && link_trb) {
/* Stop DMA */writel(EP_CMD_DFLUSH, &priv_dev->regs->ep_cmd);/* wait for DFLUSH cleared */readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,!(val & EP_CMD_DFLUSH), 1,- 1000);
link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep-trb_pool_dma + ((priv_req->end_trb + 1) * TRB_SIZE))); link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) | @@ -2660,6 +2668,10 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET);
req = cdns3_next_request(&priv_ep->pending_req_list);if (req)cdns3_rearm_transfer(priv_ep, 1);Why the above changes are needed?
Do you mean the last line or this patch?
Last line: DMA is stopped, so driver arm the queued transfers
If you means this patch: Issue was detected by customer test. I don’t know whether it was only test or the real application.
The problem happens because user application queued the transfer (endpoint has been armed), so controller fetch the TRB. When user application removed this request the TRB was still processed by controller. If at that time the host will send data packet then controller will accept it, but it shouldn't because the usb_request associated with TRB cached by controller was removed. To force the controller to drop this TRB DFLUSH is required.
Pawel
not_found: spin_unlock_irqrestore(&priv_dev->lock, flags); return ret; -- 2.25.1