6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Piotr Zalewski pZ010001011111@proton.me
[ Upstream commit a52dffaa46c2c5ff0b311c4dc1288581f7b9109e ]
Make video port registers nonvolatile. As DSP_CTRL register is written to twice due to gamma LUT enable bit which is set outside of the main DSP_CTRL initialization within atomic_enable (for rk356x case it is also necessary to always disable gamma LUT before writing a new LUT) there is a chance that DSP_CTRL value read-out in gamma LUT init/update code is not the one which was written by the preceding DSP_CTRL initialization code within atomic_enable. This might result in misconfigured DSP_CTRL which leads to no visual output[1]. Since DSP_CTRL write takes effect after VSYNC[1] the issue is not always present. When tested on Pinetab2 with kernel 6.14 it happenes only when DRM is compiled as a module[1]. In order to confirm that it is a timing issue I inserted 18ms udelay before vop2_crtc_atomic_try_set_gamma in atomic enable and compiled DRM as module - this has also fixed the issue.
[1] https://lore.kernel.org/linux-rockchip/562b38e5.a496.1975f09f983.Coremail.an...
Reported-by: Diederik de Haas didi.debian@cknow.org Closes: https://lore.kernel.org/linux-rockchip/DAEVDSTMWI1E.J454VZN0R9MA@cknow.org/ Suggested-by: Andy Yan andy.yan@rock-chips.com Signed-off-by: Piotr Zalewski pZ010001011111@proton.me Tested-by: Diederik de Haas didi.debian@cknow.org Signed-off-by: Heiko Stuebner heiko@sntech.de Link: https://lore.kernel.org/r/20250706083629.140332-2-pZ010001011111@proton.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c index 5d7df4c3b08c4..bb936964d9211 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c @@ -3153,12 +3153,13 @@ static int vop2_win_init(struct vop2 *vop2) }
/* - * The window registers are only updated when config done is written. - * Until that they read back the old value. As we read-modify-write - * these registers mark them as non-volatile. This makes sure we read - * the new values from the regmap register cache. + * The window and video port registers are only updated when config + * done is written. Until that they read back the old value. As we + * read-modify-write these registers mark them as non-volatile. This + * makes sure we read the new values from the regmap register cache. */ static const struct regmap_range vop2_nonvolatile_range[] = { + regmap_reg_range(RK3568_VP0_CTRL_BASE, RK3588_VP3_CTRL_BASE + 255), regmap_reg_range(0x1000, 0x23ff), };