From: Veeraiyan Chidambaram veeraiyan.chidambaram@in.bosch.com
[ Upstream commit 39abcc84846bbc0538f13c190b6a9c7e36890cd2 ]
When R-Car Gen3 USB 2.0 is in Gadget mode, if host is detached an interrupt will be generated and Suspended state bit is set in interrupt status register. Interrupt handler will call driver->suspend(composite_suspend) if suspended state bit is set. composite_suspend will call ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed by user space application via /dev/ep0.
To be able to detect host detach, extend the DVSQ_MASK to cover the Suspended bit of the DVSQ[2:0] bitfield from the Interrupt Status Register 0 (INTSTS0) register and perform appropriate action in the DVST interrupt handler (usbhsg_irq_dev_state).
Without this commit, disconnection of the phone from R-Car-H3 ES2.0 Salvator-X CN9 port is not recognized and reverse role switch does not happen. If phone is connected again it does not enumerate.
With this commit, disconnection will be recognized and reverse role switch will happen by a user space application. If phone is connected again it will enumerate properly and will become visible in the output of 'lsusb'.
Signed-off-by: Veeraiyan Chidambaram veeraiyan.chidambaram@in.bosch.com Signed-off-by: Eugeniu Rosca erosca@de.adit-jv.com Reviewed-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Tested-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Link: https://lore.kernel.org/r/1568207756-22325-3-git-send-email-external.veeraiy... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/renesas_usbhs/common.h | 3 ++- drivers/usb/renesas_usbhs/mod_gadget.c | 12 +++++++++--- 2 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index b8620aa6b72e6..8424c165f732a 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -163,11 +163,12 @@ struct usbhs_priv; #define VBSTS (1 << 7) /* VBUS_0 and VBUSIN_0 Input Status */ #define VALID (1 << 3) /* USB Request Receive */
-#define DVSQ_MASK (0x3 << 4) /* Device State */ +#define DVSQ_MASK (0x7 << 4) /* Device State */ #define POWER_STATE (0 << 4) #define DEFAULT_STATE (1 << 4) #define ADDRESS_STATE (2 << 4) #define CONFIGURATION_STATE (3 << 4) +#define SUSPENDED_STATE (4 << 4)
#define CTSQ_MASK (0x7) /* Control Transfer Stage */ #define IDLE_SETUP_STAGE 0 /* Idle stage or setup stage */ diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index efe8d815cf2c7..5731621984c6c 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -467,12 +467,18 @@ static int usbhsg_irq_dev_state(struct usbhs_priv *priv, { struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); struct device *dev = usbhsg_gpriv_to_dev(gpriv); + int state = usbhs_status_get_device_state(irq_state);
gpriv->gadget.speed = usbhs_bus_get_speed(priv);
- dev_dbg(dev, "state = %x : speed : %d\n", - usbhs_status_get_device_state(irq_state), - gpriv->gadget.speed); + dev_dbg(dev, "state = %x : speed : %d\n", state, gpriv->gadget.speed); + + if (gpriv->gadget.speed != USB_SPEED_UNKNOWN && + (state & SUSPENDED_STATE)) { + if (gpriv->driver && gpriv->driver->suspend) + gpriv->driver->suspend(&gpriv->gadget); + usb_gadget_set_state(&gpriv->gadget, USB_STATE_SUSPENDED); + }
return 0; }