From: Lucas Stach l.stach@pengutronix.de
[ Upstream commit 15a5261e4d052bf85c7fba24dbe0e9a7c8c05925 ]
This fixes multiple issues with the current non-existent PCIe clock setup:
The controller can run at up to 250MHz, so use a parent that provides this clock.
The PHY needs an exact 100MHz reference clock to function if the PCIe refclock is not fed in via the refclock pads. While this mode is not supported (yet) in the driver it doesn't hurt to make sure we are providing a clock with the right rate.
The AUX clock is specified to have a maximum clock rate of 10MHz. So the current setup, which drives it straight from the 25MHz oscillator is actually overclocking the AUX input.
Signed-off-by: Lucas Stach l.stach@pengutronix.de Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 17c449e12c2e..91df9c5350ae 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1383,6 +1383,14 @@ pcie0: pcie@33800000 { <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&clk IMX8MQ_CLK_PCIE1_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; status = "disabled"; };
@@ -1413,6 +1421,14 @@ pcie1: pcie@33c00000 { <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; status = "disabled"; };