Hi!
[ Upstream commit 90c6cb4a355e7befcb557d217d1d8b8bd5875a05 ]
Trying to change Link Status register does not have any effect as this is a read-only register. Trying to overwrite bits for Negotiated Link Width does not make sense.
I don't quite get it. This says register is read only...
In future proper change of link width can be done via Lane Count Select bits in PCIe Control 0 register.
Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link Control register is wrong. There should be at least some detection if endpoint supports L0s as isn't mandatory.
....and this says it is wrong to set the bits as ASPM L0 is not mandatory.
+++ b/drivers/pci/controller/pci-aardvark.c @@ -321,10 +321,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie) advk_pcie_wait_for_link(pcie);
- reg = PCIE_CORE_LINK_L0S_ENTRY |
(1 << PCIE_CORE_LINK_WIDTH_SHIFT);- advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
- reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG); reg |= PCIE_CORE_CMD_MEM_ACCESS_EN | PCIE_CORE_CMD_IO_ACCESS_EN |
...but we only do single write.
So which is it?
Best regards, Pavel