From: Krishna Kurapati quic_kriskura@quicinc.com
[ Upstream commit 921e109c6200741499ad0136e41cca9d16431c92 ]
All DWC3 Multi Port controllers that exist today only support host mode. Temporarily map XHCI address space for host-only controllers and parse XHCI Extended Capabilities registers to read number of usb2 ports and usb3 ports present on multiport controller. Each USB Port is at least HS capable.
The port info for usb2 and usb3 phy are identified as num_usb2_ports and num_usb3_ports and these are used as iterators for phy operations and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly.
Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Bjorn Andersson quic_bjorande@quicinc.com Acked-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Reviewed-by: Johan Hovold johan+linaro@kernel.org Tested-by: Johan Hovold johan+linaro@kernel.org Link: https://lore.kernel.org/r/20240420044901.884098-3-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 5 ++++ 2 files changed, 66 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 100041320e8dd..2a93468bdce50 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -39,6 +39,7 @@ #include "io.h"
#include "debug.h" +#include "../host/xhci-ext-caps.h"
#define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */
@@ -1867,10 +1868,56 @@ static int dwc3_get_clocks(struct dwc3 *dwc) return 0; }
+static int dwc3_get_num_ports(struct dwc3 *dwc) +{ + void __iomem *base; + u8 major_revision; + u32 offset; + u32 val; + + /* + * Remap xHCI address space to access XHCI ext cap regs since it is + * needed to get information on number of ports present. + */ + base = ioremap(dwc->xhci_resources[0].start, + resource_size(&dwc->xhci_resources[0])); + if (!base) + return -ENOMEM; + + offset = 0; + do { + offset = xhci_find_next_ext_cap(base, offset, + XHCI_EXT_CAPS_PROTOCOL); + if (!offset) + break; + + val = readl(base + offset); + major_revision = XHCI_EXT_PORT_MAJOR(val); + + val = readl(base + offset + 0x08); + if (major_revision == 0x03) { + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val); + } else if (major_revision <= 0x02) { + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val); + } else { + dev_warn(dwc->dev, "unrecognized port major revision %d\n", + major_revision); + } + } while (1); + + dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", + dwc->num_usb2_ports, dwc->num_usb3_ports); + + iounmap(base); + + return 0; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct resource *res, dwc_res; + unsigned int hw_mode; void __iomem *regs; struct dwc3 *dwc; int ret; @@ -1954,6 +2001,20 @@ static int dwc3_probe(struct platform_device *pdev) goto err_disable_clks; }
+ /* + * Currently only DWC3 controllers that are host-only capable + * can have more than one port. + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { + ret = dwc3_get_num_ports(dwc); + if (ret) + goto err_disable_clks; + } else { + dwc->num_usb2_ports = 1; + dwc->num_usb3_ports = 1; + } + spin_lock_init(&dwc->lock); mutex_init(&dwc->mutex);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 180dd8d29287c..ef80864fcd57b 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1039,6 +1039,8 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @num_usb2_ports: number of USB2 ports + * @num_usb3_ports: number of USB3 ports * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface * @ulpi_ready: flag to indicate that ULPI is initialized @@ -1187,6 +1189,9 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy;
+ u8 num_usb2_ports; + u8 num_usb3_ports; + bool phys_ready;
struct ulpi *ulpi;