The patch below does not apply to the 5.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From be03b0651ffd8bab69dfd574c6818b446c0753ce Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= ilpo.jarvinen@linux.intel.com Date: Fri, 20 May 2022 13:35:41 +0300 Subject: [PATCH] serial: 8250: Store to lsr_save_flags after lsr read MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit
Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags.
This fix was initially mixed into feature commit f6f586102add ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change.
Re-add the lsr_save_flags fix and properly mark it's a fix.
Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.c... Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Cc: stable stable@kernel.org Acked-by: Uwe Kleine-König u.kleine-koenig@penugtronix.de Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.c... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 78b6dedc43e6..8f32fe9e149e 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1517,6 +1517,8 @@ static inline void __stop_tx(struct uart_8250_port *p) unsigned char lsr = serial_in(p, UART_LSR); u64 stop_delay = 0;
+ p->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if (!(lsr & UART_LSR_THRE)) return; /*