From: Jacob Keller jacob.e.keller@intel.com
[ Upstream commit 3e256ac5b1ec307e5dd5a4c99fbdbc651446c738 ]
We've had support for setting both a minimum and maximum bandwidth via .ndo_set_vf_bw since commit 883a9ccbae56 ("fm10k: Add support for SR-IOV to driver", 2014-09-20).
Likely because we do not support minimum rates, the declaration mis-ordered the "unused" parameter, which causes warnings when analyzed with cppcheck.
Fix this warning by properly declaring the min_rate and max_rate variables in the declaration and definition (rather than using "unused"). Also rename "rate" to max_rate so as to clarify that we only support setting the maximum rate.
Signed-off-by: Jacob Keller jacob.e.keller@intel.com Tested-by: Krishneil Singh krishneil.k.singh@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin alexander.levin@verizon.com --- drivers/net/ethernet/intel/fm10k/fm10k.h | 4 ++-- drivers/net/ethernet/intel/fm10k/fm10k_iov.c | 9 +++++---- 2 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h index 689c413b7782..d2f9a2dd76a2 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k.h @@ -526,8 +526,8 @@ s32 fm10k_iov_update_pvid(struct fm10k_intfc *interface, u16 glort, u16 pvid); int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac); int fm10k_ndo_set_vf_vlan(struct net_device *netdev, int vf_idx, u16 vid, u8 qos, __be16 vlan_proto); -int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, int rate, - int unused); +int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, + int __always_unused min_rate, int max_rate); int fm10k_ndo_get_vf_config(struct net_device *netdev, int vf_idx, struct ifla_vf_info *ivi);
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c index 5f4dac0d36ef..f919199944a0 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c @@ -482,7 +482,7 @@ int fm10k_ndo_set_vf_vlan(struct net_device *netdev, int vf_idx, u16 vid, }
int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, - int __always_unused unused, int rate) + int __always_unused min_rate, int max_rate) { struct fm10k_intfc *interface = netdev_priv(netdev); struct fm10k_iov_data *iov_data = interface->iov_data; @@ -493,14 +493,15 @@ int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, return -EINVAL;
/* rate limit cannot be less than 10Mbs or greater than link speed */ - if (rate && ((rate < FM10K_VF_TC_MIN) || rate > FM10K_VF_TC_MAX)) + if (max_rate && + (max_rate < FM10K_VF_TC_MIN || max_rate > FM10K_VF_TC_MAX)) return -EINVAL;
/* store values */ - iov_data->vf_info[vf_idx].rate = rate; + iov_data->vf_info[vf_idx].rate = max_rate;
/* update hardware configuration */ - hw->iov.ops.configure_tc(hw, vf_idx, rate); + hw->iov.ops.configure_tc(hw, vf_idx, max_rate);
return 0; }