From: Shay Agroskin shayagr@amazon.com
[ Upstream commit 09323b3bca95181c0da79daebc8b0603e500f573 ]
The ENA driver uses the readless mechanism, which uses DMA, to find out what the DMA mask is supposed to be.
If DMA is used without setting the dma_mask first, it causes the Intel IOMMU driver to think that ENA is a 32-bit device and therefore disables IOMMU passthrough permanently.
This patch sets the dma_mask to be ENA_MAX_PHYS_ADDR_SIZE_BITS=48 before readless initialization in ena_device_init()->ena_com_mmio_reg_read_request_init(), which is large enough to workaround the intel_iommu issue.
DMA mask is set again to the correct value after it's received from the device after readless is initialized.
The patch also changes the driver to use dma_set_mask_and_coherent() function instead of the two pci_set_dma_mask() and pci_set_consistent_dma_mask() ones. Both methods achieve the same effect.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Mike Cui mikecui@amazon.com Signed-off-by: Arthur Kiyanovski akiyano@amazon.com Signed-off-by: Shay Agroskin shayagr@amazon.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index d9ece9ac6f53c..938170b91f85e 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -2474,16 +2474,9 @@ static int ena_device_init(struct ena_com_dev *ena_dev, struct pci_dev *pdev, goto err_mmio_read_less; }
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(dma_width)); + rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(dma_width)); if (rc) { - dev_err(dev, "pci_set_dma_mask failed 0x%x\n", rc); - goto err_mmio_read_less; - } - - rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(dma_width)); - if (rc) { - dev_err(dev, "err_pci_set_consistent_dma_mask failed 0x%x\n", - rc); + dev_err(dev, "dma_set_mask_and_coherent failed %d\n", rc); goto err_mmio_read_less; }
@@ -3141,6 +3134,12 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; }
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(ENA_MAX_PHYS_ADDR_SIZE_BITS)); + if (rc) { + dev_err(&pdev->dev, "dma_set_mask_and_coherent failed %d\n", rc); + goto err_disable_device; + } + pci_set_master(pdev);
ena_dev = vzalloc(sizeof(*ena_dev));