On LNL+ for a disconnected sink the pin assignment value gets cleared by the HW/FW as soon as the sink gets disconnected, even if the PHY ownership got acquired already by the BIOS/driver (and hence the PHY itself is still connected and used by the display). During HW readout this can result in detecting the PHY's max lane count as 0 - matching the above cleared aka NONE pin assignment HW state. For a connected PHY the driver in general (outside of intel_tc.c) expects the max lane count value to be valid for the video mode enabled on the corresponding output (1, 2 or 4). Ensure this by setting the max lane count to 4 in this case. Note, that it doesn't matter if this lane count happened to be more than the max lane count with which the PHY got connected and enabled, since the only thing the driver can do with such an output - where the DP-alt sink is disconnected - is to disable the output.
Cc: stable@vger.kernel.org # v6.8+ Reported-by: Charlton Lin charlton.lin@intel.com Tested-by: Khaled Almahallawy khaled.almahallawy@intel.com Signed-off-by: Imre Deak imre.deak@intel.com --- drivers/gpu/drm/i915/display/intel_tc.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c index ea6c73af683a0..ea93893980e17 100644 --- a/drivers/gpu/drm/i915/display/intel_tc.c +++ b/drivers/gpu/drm/i915/display/intel_tc.c @@ -23,6 +23,7 @@ #include "intel_modeset_lock.h" #include "intel_tc.h"
+#define DP_PIN_ASSIGNMENT_NONE 0x0 #define DP_PIN_ASSIGNMENT_C 0x3 #define DP_PIN_ASSIGNMENT_D 0x4 #define DP_PIN_ASSIGNMENT_E 0x5 @@ -308,6 +309,8 @@ static int lnl_tc_port_get_max_lane_count(struct intel_digital_port *dig_port) REG_FIELD_GET(TCSS_DDI_STATUS_PIN_ASSIGNMENT_MASK, val);
switch (pin_assignment) { + case DP_PIN_ASSIGNMENT_NONE: + return 0; default: MISSING_CASE(pin_assignment); fallthrough; @@ -1157,6 +1160,12 @@ static void xelpdp_tc_phy_get_hw_state(struct intel_tc_port *tc) tc->lock_wakeref = tc_cold_block(tc);
read_pin_configuration(tc); + /* + * Set a valid lane count value for a DP-alt sink which got + * disconnected. The driver can only disable the output on this PHY. + */ + if (tc->max_lane_count == 0) + tc->max_lane_count = 4;
drm_WARN_ON(display->drm, (tc->mode == TC_PORT_DP_ALT || tc->mode == TC_PORT_LEGACY) &&