The device will send an error event command, to indicate certain errors. This indicates a misbehaving driver, and should never occur.
Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Anssi Hannula anssi.hannula@bitwise.fi Co-developed-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Anssi Hannula anssi.hannula@bitwise.fi Signed-off-by: Jimmy Assarsson extja@kvaser.com --- Changes in v4: - No changes
Changes in v3: - Rebased on 1d5eeda23f36 ("can: kvaser_usb: advertise timestamping capabilities and add ioctl support") - Add stable to CC - Add Tested-by Anssi Hannula
Changes in v2: - New in v2. Replaces parts of [PATCH 09/12] can: kvaser_usb_leaf: Fix silently failing bus params setup
.../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+)
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c index 24c474e9d579..cd5b67f48534 100644 --- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c @@ -70,6 +70,7 @@ #define CMD_GET_CARD_INFO_REPLY 35 #define CMD_GET_SOFTWARE_INFO 38 #define CMD_GET_SOFTWARE_INFO_REPLY 39 +#define CMD_ERROR_EVENT 45 #define CMD_FLUSH_QUEUE 48 #define CMD_TX_ACKNOWLEDGE 50 #define CMD_CAN_ERROR_EVENT 51 @@ -258,6 +259,28 @@ struct usbcan_cmd_can_error_event { __le16 time; } __packed;
+/* CMD_ERROR_EVENT error codes */ +#define KVASER_USB_LEAF_ERROR_EVENT_TX_QUEUE_FULL 0x8 +#define KVASER_USB_LEAF_ERROR_EVENT_PARAM 0x9 + +struct leaf_cmd_error_event { + u8 tid; + u8 error_code; + __le16 timestamp[3]; + __le16 padding; + __le16 info1; + __le16 info2; +} __packed; + +struct usbcan_cmd_error_event { + u8 tid; + u8 error_code; + __le16 info1; + __le16 info2; + __le16 timestamp; + __le16 padding; +} __packed; + struct kvaser_cmd_ctrl_mode { u8 tid; u8 channel; @@ -321,6 +344,7 @@ struct kvaser_cmd { struct leaf_cmd_chip_state_event chip_state_event; struct leaf_cmd_can_error_event can_error_event; struct leaf_cmd_log_message log_message; + struct leaf_cmd_error_event error_event; struct kvaser_cmd_cap_req cap_req; struct kvaser_cmd_cap_res cap_res; } __packed leaf; @@ -330,6 +354,7 @@ struct kvaser_cmd { struct usbcan_cmd_rx_can rx_can; struct usbcan_cmd_chip_state_event chip_state_event; struct usbcan_cmd_can_error_event can_error_event; + struct usbcan_cmd_error_event error_event; } __packed usbcan;
struct kvaser_cmd_tx_can tx_can; @@ -353,6 +378,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_leaf[] = { [CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.leaf.chip_state_event), [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.leaf.can_error_event), [CMD_GET_CAPABILITIES_RESP] = kvaser_fsize(u.leaf.cap_res), + [CMD_ERROR_EVENT] = kvaser_fsize(u.leaf.error_event), /* ignored events: */ [CMD_FLUSH_QUEUE_REPLY] = CMD_SIZE_ANY, }; @@ -367,6 +393,7 @@ static const u8 kvaser_usb_leaf_cmd_sizes_usbcan[] = { [CMD_RX_EXT_MESSAGE] = kvaser_fsize(u.usbcan.rx_can), [CMD_CHIP_STATE_EVENT] = kvaser_fsize(u.usbcan.chip_state_event), [CMD_CAN_ERROR_EVENT] = kvaser_fsize(u.usbcan.can_error_event), + [CMD_ERROR_EVENT] = kvaser_fsize(u.usbcan.error_event), /* ignored events: */ [CMD_USBCAN_CLOCK_OVERFLOW_EVENT] = CMD_SIZE_ANY, }; @@ -1304,6 +1331,74 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev, netif_rx(skb); }
+static void kvaser_usb_leaf_error_event_parameter(const struct kvaser_usb *dev, + const struct kvaser_cmd *cmd) +{ + u16 info1 = 0; + + switch (dev->driver_info->family) { + case KVASER_LEAF: + info1 = le16_to_cpu(cmd->u.leaf.error_event.info1); + break; + case KVASER_USBCAN: + info1 = le16_to_cpu(cmd->u.usbcan.error_event.info1); + break; + } + + /* info1 will contain the offending cmd_no */ + switch (info1) { + case CMD_SET_CTRL_MODE: + dev_warn(&dev->intf->dev, + "CMD_SET_CTRL_MODE error in parameter\n"); + break; + + case CMD_SET_BUS_PARAMS: + dev_warn(&dev->intf->dev, + "CMD_SET_BUS_PARAMS error in parameter\n"); + break; + + default: + dev_warn(&dev->intf->dev, + "Unhandled parameter error event cmd_no (%u)\n", + info1); + break; + } +} + +static void kvaser_usb_leaf_error_event(const struct kvaser_usb *dev, + const struct kvaser_cmd *cmd) +{ + u8 error_code = 0; + + switch (dev->driver_info->family) { + case KVASER_LEAF: + error_code = cmd->u.leaf.error_event.error_code; + break; + case KVASER_USBCAN: + error_code = cmd->u.usbcan.error_event.error_code; + break; + } + + switch (error_code) { + case KVASER_USB_LEAF_ERROR_EVENT_TX_QUEUE_FULL: + /* Received additional CAN message, when firmware TX queue is + * already full. Something is wrong with the driver. + * This should never happen! + */ + dev_err(&dev->intf->dev, + "Received error event TX_QUEUE_FULL\n"); + break; + case KVASER_USB_LEAF_ERROR_EVENT_PARAM: + kvaser_usb_leaf_error_event_parameter(dev, cmd); + break; + + default: + dev_warn(&dev->intf->dev, + "Unhandled error event (%d)\n", error_code); + break; + } +} + static void kvaser_usb_leaf_start_chip_reply(const struct kvaser_usb *dev, const struct kvaser_cmd *cmd) { @@ -1382,6 +1477,10 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev, kvaser_usb_leaf_tx_acknowledge(dev, cmd); break;
+ case CMD_ERROR_EVENT: + kvaser_usb_leaf_error_event(dev, cmd); + break; + /* Ignored commands */ case CMD_USBCAN_CLOCK_OVERFLOW_EVENT: if (dev->driver_info->family != KVASER_USBCAN)