6.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bartosz Golaszewski bartosz.golaszewski@linaro.org
commit 527250cd9092461f1beac3e4180a4481bffa01b5 upstream.
Members of struct software_node_ref_args should not be dereferenced directly but set using the provided macros. Commit d7cdbbc93c56 ("software node: allow referencing firmware nodes") changed the name of the software node member and caused a build failure. Remove all direct dereferences of the ref struct as a fix.
However, this driver also seems to abuse the software node interface by waiting for a node with an arbitrary name "intel-xhci-usb-sw" to appear in the system before setting up the reference for the I2C device, while the actual software node already exists in the intel-xhci-usb-role-switch module and should be used to set up a static reference. Add a FIXME for a future improvement.
Fixes: d7cdbbc93c56 ("software node: allow referencing firmware nodes") Fixes: 53c24c2932e5 ("platform/x86: intel_cht_int33fe: use inline reference properties") Cc: stable@vger.kernel.org Reported-by: Stephen Rothwell sfr@canb.auug.org.au Closes: https://lore.kernel.org/all/20251121111534.7cdbfe5c@canb.auug.org.au/ Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Reviewed-by: Hans de Goede johannes.goede@oss.qualcomm.com Acked-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/platform/x86/intel/chtwc_int33fe.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-)
--- a/drivers/platform/x86/intel/chtwc_int33fe.c +++ b/drivers/platform/x86/intel/chtwc_int33fe.c @@ -77,7 +77,7 @@ static const struct software_node max170 * software node. */ static struct software_node_ref_args fusb302_mux_refs[] = { - { .node = NULL }, + SOFTWARE_NODE_REFERENCE(NULL), };
static const struct property_entry fusb302_properties[] = { @@ -190,11 +190,6 @@ static void cht_int33fe_remove_nodes(str { software_node_unregister_node_group(node_group);
- if (fusb302_mux_refs[0].node) { - fwnode_handle_put(software_node_fwnode(fusb302_mux_refs[0].node)); - fusb302_mux_refs[0].node = NULL; - } - if (data->dp) { data->dp->secondary = NULL; fwnode_handle_put(data->dp); @@ -202,7 +197,15 @@ static void cht_int33fe_remove_nodes(str } }
-static int cht_int33fe_add_nodes(struct cht_int33fe_data *data) +static void cht_int33fe_put_swnode(void *data) +{ + struct fwnode_handle *fwnode = data; + + fwnode_handle_put(fwnode); + fusb302_mux_refs[0] = SOFTWARE_NODE_REFERENCE(NULL); +} + +static int cht_int33fe_add_nodes(struct device *dev, struct cht_int33fe_data *data) { const struct software_node *mux_ref_node; int ret; @@ -212,17 +215,25 @@ static int cht_int33fe_add_nodes(struct * until the mux driver has created software node for the mux device. * It means we depend on the mux driver. This function will return * -EPROBE_DEFER until the mux device is registered. + * + * FIXME: the relevant software node exists in intel-xhci-usb-role-switch + * and - if exported - could be used to set up a static reference. */ mux_ref_node = software_node_find_by_name(NULL, "intel-xhci-usb-sw"); if (!mux_ref_node) return -EPROBE_DEFER;
+ ret = devm_add_action_or_reset(dev, cht_int33fe_put_swnode, + software_node_fwnode(mux_ref_node)); + if (ret) + return ret; + /* * Update node used in "usb-role-switch" property. Note that we * rely on software_node_register_node_group() to use the original * instance of properties instead of copying them. */ - fusb302_mux_refs[0].node = mux_ref_node; + fusb302_mux_refs[0] = SOFTWARE_NODE_REFERENCE(mux_ref_node);
ret = software_node_register_node_group(node_group); if (ret) @@ -345,7 +356,7 @@ static int cht_int33fe_typec_probe(struc return fusb302_irq; }
- ret = cht_int33fe_add_nodes(data); + ret = cht_int33fe_add_nodes(dev, data); if (ret) return ret;