6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal dlemoal@kernel.org
commit 52912ca87e2b810e5acdcdc452593d30c9187d8f upstream.
For SCSI devices supporting the Command Duration Limits feature set, the user can enable/disable this feature use through the sysfs device attribute "cdl_enable". This attribute modification triggers a call to scsi_cdl_enable() to enable and disable the feature for ATA devices and set the scsi device cdl_enable field to the user provided bool value. For SCSI devices supporting CDL, the feature set is always enabled and scsi_cdl_enable() is reduced to setting the cdl_enable field.
However, for ATA devices, a drive may spin-up with the CDL feature enabled by default. But the SCSI device cdl_enable field is always initialized to false (CDL disabled), regardless of the actual device CDL feature state. For ATA devices managed by libata (or libsas), libata-core always disables the CDL feature set when the device is attached, thus syncing the state of the CDL feature on the device and of the SCSI device cdl_enable field. However, for ATA devices connected to a SAS HBA, the CDL feature is not disabled on scan for ATA devices that have this feature enabled by default, leading to an inconsistent state of the feature on the device with the SCSI device cdl_enable field.
Avoid this inconsistency by adding a call to scsi_cdl_enable() in scsi_cdl_check() to make sure that the device-side state of the CDL feature set always matches the scsi device cdl_enable field state. This implies that CDL will always be disabled for ATA devices connected to SAS HBAs, which is consistent with libata/libsas initialization of the device.
Reported-by: Scott McCoy scott.mccoy@wdc.com Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel cassel@kernel.org Reviewed-by: Igor Pylypiv ipylypiv@google.com Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/scsi.c | 7 +++++++ 1 file changed, 7 insertions(+)
--- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -671,6 +671,13 @@ void scsi_cdl_check(struct scsi_device * sdev->use_10_for_rw = 0;
sdev->cdl_supported = 1; + + /* + * If the device supports CDL, make sure that the current drive + * feature status is consistent with the user controlled + * cdl_enable state. + */ + scsi_cdl_enable(sdev, sdev->cdl_enable); } else { sdev->cdl_supported = 0; }