From: Puranjay Mohan puranjay12@gmail.com
[ Upstream commit bf43a71a0a7f396434f6460b46e33eb00752f78d ]
Add devicetree binding document for ADXL355, a 3-Axis MEMS Accelerometer.
Signed-off-by: Puranjay Mohan puranjay12@gmail.com Reviewed-by: Rob Herring robh@kernel.org Link: https://lore.kernel.org/r/20210811073027.124619-2-puranjay12@gmail.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../bindings/iio/accel/adi,adxl355.yaml | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml new file mode 100644 index 000000000000..ba54d6998f2e --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer + +maintainers: + - Puranjay Mohan puranjay12@gmail.com + +description: | + Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports + both I2C & SPI interfaces + https://www.analog.com/en/products/adxl355.html + +properties: + compatible: + enum: + - adi,adxl355 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 3 + description: | + Type for DRDY should be IRQ_TYPE_EDGE_RISING. + Three configurable interrupt lines exist. + + interrupt-names: + description: Specify which interrupt line is in use. + items: + enum: + - INT1 + - INT2 + - DRDY + minItems: 1 + maxItems: 3 + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@1d { + compatible = "adi,adxl355"; + reg = <0x1d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@0 { + compatible = "adi,adxl355"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; + }; + };