From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. This was not critical before, but since rework of thermal Devicetree initialization in the commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization"), this leads to errors registering thermal zones other than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2 thermal_sys: Failed to find thermal zone for tmu id=0 exynos-tmu 10064000.tmu: Failed to register sensor: -2 exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro... Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/exynos5422-odroidhc1.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -29,7 +29,7 @@
thermal-zones { cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0 0>; + thermal-sensors = <&tmu_cpu0>; trips { cpu0_alert0: cpu-alert-0 { temperature = <70000>; /* millicelsius */ @@ -84,7 +84,7 @@ }; }; cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1 0>; + thermal-sensors = <&tmu_cpu1>; trips { cpu1_alert0: cpu-alert-0 { temperature = <70000>; @@ -128,7 +128,7 @@ }; }; cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2 0>; + thermal-sensors = <&tmu_cpu2>; trips { cpu2_alert0: cpu-alert-0 { temperature = <70000>; @@ -172,7 +172,7 @@ }; }; cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3 0>; + thermal-sensors = <&tmu_cpu3>; trips { cpu3_alert0: cpu-alert-0 { temperature = <70000>; @@ -216,7 +216,7 @@ }; }; gpu_thermal: gpu-thermal { - thermal-sensors = <&tmu_gpu 0>; + thermal-sensors = <&tmu_gpu>; trips { gpu_alert0: gpu-alert-0 { temperature = <70000>;