TJA1120B/TJA1121B can achieve a stable operation of SGMII after a startup event by putting the SGMII PCS into power down mode and restart afterwards.
It is necessary to put the SGMII PCS into power down mode and back up.
Cc: stable@vger.kernel.org Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support") Signed-off-by: Andrei Botila andrei.botila@oss.nxp.com --- drivers/net/phy/nxp-c45-tja11xx.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c index e083b1a714fd..d142e0a02327 100644 --- a/drivers/net/phy/nxp-c45-tja11xx.c +++ b/drivers/net/phy/nxp-c45-tja11xx.c @@ -114,6 +114,9 @@ #define MII_BASIC_CONFIG_RMII 0x5 #define MII_BASIC_CONFIG_MII 0x4
+#define VEND1_SGMII_BASIC_CONTROL 0xB000 +#define SGMII_LPM BIT(11) + #define VEND1_SYMBOL_ERROR_CNT_XTD 0x8351 #define EXTENDED_CNT_EN BIT(15) #define VEND1_MONITOR_STATUS 0xAC80 @@ -1598,11 +1601,11 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev) return 0; }
-/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 */ +/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 & 3.2 */ static void nxp_c45_tja1120_errata(struct phy_device *phydev) { + bool macsec_ability, sgmii_ability; int silicon_version, sample_type; - bool macsec_ability; int phy_abilities; int ret = 0;
@@ -1619,6 +1622,7 @@ static void nxp_c45_tja1120_errata(struct phy_device *phydev) phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_PORT_ABILITIES); macsec_ability = !!(phy_abilities & MACSEC_ABILITY); + sgmii_ability = !!(phy_abilities & SGMII_ABILITY); if ((!macsec_ability && silicon_version == 2) || (macsec_ability && silicon_version == 1)) { /* TJA1120/TJA1121 PHY configuration errata workaround. @@ -1639,6 +1643,18 @@ static void nxp_c45_tja1120_errata(struct phy_device *phydev)
phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x0); phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0); + + if (sgmii_ability) { + /* TJA1120B/TJA1121B SGMII PCS restart errata workaround. + * Put SGMII PCS into power down mode and back up. + */ + phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, + VEND1_SGMII_BASIC_CONTROL, + SGMII_LPM); + phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + VEND1_SGMII_BASIC_CONTROL, + SGMII_LPM); + } } }