From: Basavaraj Natikar Basavaraj.Natikar@amd.com
commit df72b4a692b60d3e5d99d9ef662b2d03c44bb9c0 upstream.
GPIO registers include Bit 27 for WakeCntrlZ used to enable wake in Z state. Hence add Z-state wake control bits to debugfs output to debug and analyze Z-states problems.
Signed-off-by: Basavaraj Natikar Basavaraj.Natikar@amd.com Suggested-by: Mario Limonciello mario.limonciello@amd.com Tested-by: Guruvendra Punugupati Guruvendra.Punugupati@amd.com Link: https://lore.kernel.org/r/20221208093704.1151928-1-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pinctrl/pinctrl-amd.c | 7 +++++++ drivers/pinctrl/pinctrl-amd.h | 1 + 2 files changed, 8 insertions(+)
--- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -218,6 +218,7 @@ static void amd_gpio_dbg_show(struct seq char *orientation; char debounce_value[40]; char *debounce_enable; + char *wake_cntrlz;
for (bank = 0; bank < gpio_dev->hwbank_num; bank++) { unsigned int time = 0; @@ -305,6 +306,12 @@ static void amd_gpio_dbg_show(struct seq wake_cntrl2 = " ∅"; seq_printf(s, "S4/S5 %s| ", wake_cntrl2);
+ if (pin_reg & BIT(WAKECNTRL_Z_OFF)) + wake_cntrlz = "⏰"; + else + wake_cntrlz = " ∅"; + seq_printf(s, "Z %s| ", wake_cntrlz); + if (pin_reg & BIT(PULL_UP_ENABLE_OFF)) { pull_up_enable = "+"; if (pin_reg & BIT(PULL_UP_SEL_OFF)) --- a/drivers/pinctrl/pinctrl-amd.h +++ b/drivers/pinctrl/pinctrl-amd.h @@ -42,6 +42,7 @@ #define OUTPUT_ENABLE_OFF 23 #define SW_CNTRL_IN_OFF 24 #define SW_CNTRL_EN_OFF 25 +#define WAKECNTRL_Z_OFF 27 #define INTERRUPT_STS_OFF 28 #define WAKE_STS_OFF 29