Add camcc support and Regera PLL ops. Also, fix the pll post div mask.
Changes in V3: - Split the fixes into separate patches, remove RETAIN_FF flag for gdscs and document the BIT(15) of pll alpha value. - Link to v2: https://lore.kernel.org/all/20240702-camcc-support-sm8150-v2-1-4baf54ec7333@...
Changes in v2: - As per Konrad's comments, re-use the zonda pll code for regera, as both are mostly same. - Fix the zonda_set_rate API and also the pll_post_div shift used in trion pll post div set rate API - Link to v1: https://lore.kernel.org/r/20240229-camcc-support-sm8150-v1-0-8c28c6c87990@qu...
Satya Priya Kakitapalli (7): clk: qcom: clk-alpha-pll: Fix the pll post div mask clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL dt-bindings: clock: qcom: Add SM8150 camera clock controller clk: qcom: Add camera clock controller driver for SM8150 arm64: dts: qcom: Add camera clock controller for sm8150
Taniya Das (1): clk: qcom: clk-alpha-pll: Add support for Regera PLL ops
.../bindings/clock/qcom,sm8150-camcc.yaml | 77 + arch/arm64/boot/dts/qcom/sa8155p.dtsi | 4 + arch/arm64/boot/dts/qcom/sm8150.dtsi | 13 + drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/camcc-sm8150.c | 2159 +++++++++++++++++ drivers/clk/qcom/clk-alpha-pll.c | 57 +- drivers/clk/qcom/clk-alpha-pll.h | 5 + include/dt-bindings/clock/qcom,sm8150-camcc.h | 135 ++ 9 files changed, 2456 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml create mode 100644 drivers/clk/qcom/camcc-sm8150.c create mode 100644 include/dt-bindings/clock/qcom,sm8150-camcc.h