4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brad Love brad@nextdimension.cc
commit 3ee9bc12342cf546313d300808ff47d7dbb8e7db upstream.
The cx25840 driver currently configures 885, 887, and 888 using default divisors for each chip. This check to see if the cx23885 driver has passed the cx25840 a non-default clock rate for a specific chip. If a cx23885 board has left clk_freq at 0, the clock default values will be used to configure the PLLs.
This patch only has effect on 888 boards who set clk_freq to 25M.
Signed-off-by: Brad Love brad@nextdimension.cc Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Cc: Ben Hutchings ben.hutchings@codethink.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/media/i2c/cx25840/cx25840-core.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-)
--- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -467,8 +467,13 @@ static void cx23885_initialize(struct i2 { DEFINE_WAIT(wait); struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + u32 clk_freq = 0; struct workqueue_struct *q;
+ /* cx23885 sets hostdata to clk_freq pointer */ + if (v4l2_get_subdev_hostdata(&state->sd)) + clk_freq = *((u32 *)v4l2_get_subdev_hostdata(&state->sd)); + /* * Come out of digital power down * The CX23888, at least, needs this, otherwise registers aside from @@ -504,8 +509,13 @@ static void cx23885_initialize(struct i2 * 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz * 572.73 MHz before post divide */ - /* HVR1850 or 50MHz xtal */ - cx25840_write(client, 0x2, 0x71); + if (clk_freq == 25000000) { + /* 888/ImpactVCBe or 25Mhz xtal */ + ; /* nothing to do */ + } else { + /* HVR1850 or 50MHz xtal */ + cx25840_write(client, 0x2, 0x71); + } cx25840_write4(client, 0x11c, 0x01d1744c); cx25840_write4(client, 0x118, 0x00000416); cx25840_write4(client, 0x404, 0x0010253e); @@ -548,9 +558,15 @@ static void cx23885_initialize(struct i2 /* HVR1850 */ switch (state->id) { case CX23888_AV: - /* 888/HVR1250 specific */ - cx25840_write4(client, 0x10c, 0x13333333); - cx25840_write4(client, 0x108, 0x00000515); + if (clk_freq == 25000000) { + /* 888/ImpactVCBe or 25MHz xtal */ + cx25840_write4(client, 0x10c, 0x01b6db7b); + cx25840_write4(client, 0x108, 0x00000512); + } else { + /* 888/HVR1250 or 50MHz xtal */ + cx25840_write4(client, 0x10c, 0x13333333); + cx25840_write4(client, 0x108, 0x00000515); + } break; default: cx25840_write4(client, 0x10c, 0x002be2c9); @@ -580,7 +596,7 @@ static void cx23885_initialize(struct i2 * 368.64 MHz before post divide * 122.88 MHz / 0xa = 12.288 MHz */ - /* HVR1850 or 50MHz xtal */ + /* HVR1850 or 50MHz xtal or 25MHz xtal */ cx25840_write4(client, 0x114, 0x017dbf48); cx25840_write4(client, 0x110, 0x000a030e); break;