Define vqmmc regulator-gpio for usdhc2 with vin-supply coming from LDO5.
Without this definition LDO5 will be powered down, disabling SD card after bootup. This has been introduced in commit f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5").
Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5")
Cc: stable@vger.kernel.org Signed-off-by: Wojciech Dubowik Wojciech.Dubowik@mt.com --- v1 -> v2: https://lore.kernel.org/all/20250417112012.785420-1-Wojciech.Dubowik@mt.com/ - define gpio regulator for LDO5 vin controlled by vselect signal v2 -> v3: https://lore.kernel.org/all/20250422130127.GA238494@francesco-nb/ - specify vselect as gpio --- .../boot/dts/freescale/imx8mm-verdin.dtsi | 25 +++++++++++++++---- 1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 7251ad3a0017..b46566f3ce20 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -144,6 +144,19 @@ reg_usdhc2_vmmc: regulator-usdhc2 { startup-delay-us = <20000>; };
+ reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vsel>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + states = <1800000 0x1>, + <3300000 0x0>; + regulator-name = "PMIC_USDHC_VSELECT"; + vin-supply = <®_nvcc_sd>; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -269,7 +282,7 @@ &gpio1 { "SODIMM_19", "", "", - "", + "PMIC_USDHC_VSELECT", "", "", "", @@ -785,6 +798,7 @@ &usdhc2 { pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_usdhc2_vqmmc>; };
&wdog1 { @@ -1206,13 +1220,17 @@ pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { <MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x6>; /* SODIMM 76 */ };
+ pinctrl_usdhc2_vsel: usdhc2vselgrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x10>; /* PMIC_USDHC_VSELECT */ + }; + /* * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here. */ pinctrl_usdhc2: usdhc2grp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90>, /* SODIMM 78 */ <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x90>, /* SODIMM 74 */ <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x90>, /* SODIMM 80 */ @@ -1223,7 +1241,6 @@ pinctrl_usdhc2: usdhc2grp {
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x94>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x94>, @@ -1234,7 +1251,6 @@ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x96>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x96>, @@ -1246,7 +1262,6 @@ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { /* Avoid backfeeding with removed card power */ pinctrl_usdhc2_sleep: usdhc2slpgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x0>, <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x0>, <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x0>, <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0>,