From: Jocelyn Falempe jfalempe@redhat.com
commit b389286d0234e1edbaf62ed8bc0892a568c33662 upstream.
For G200_SE_A, PLL M setting is wrong, which leads to blank screen, or "signal out of range" on VGA display. previous code had "m |= 0x80" which was changed to m |= ((pixpllcn & BIT(8)) >> 1);
Tested on G200_SE_A rev 42
This line of code was moved to another file with commit 877507bb954e ("drm/mgag200: Provide per-device callbacks for PIXPLLC") but can be easily backported before this commit.
v2: * put BIT(7) First to respect MSB-to-LSB (Thomas) * Add a comment to explain that this bit must be set (Thomas)
Fixes: 2dd040946ecf ("drm/mgag200: Store values (not bits) in struct mgag200_pll_values") Cc: stable@vger.kernel.org Signed-off-by: Jocelyn Falempe jfalempe@redhat.com Reviewed-by: Thomas Zimmermann tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20221013132810.521945-1-jfalem... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/mgag200/mgag200_pll.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/mgag200/mgag200_pll.c +++ b/drivers/gpu/drm/mgag200/mgag200_pll.c @@ -269,7 +269,8 @@ static void mgag200_pixpll_update_g200se pixpllcp = pixpllc->p - 1; pixpllcs = pixpllc->s;
- xpixpllcm = pixpllcm | ((pixpllcn & BIT(8)) >> 1); + // For G200SE A, BIT(7) should be set unconditionally. + xpixpllcm = BIT(7) | pixpllcm; xpixpllcn = pixpllcn; xpixpllcp = (pixpllcs << 3) | pixpllcp;