From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit 078dc5194c0ac1b8e2fc088be2168a1104e16f72 ]
The OMAP2 platform data quirk is using the global GPIO numberspace to obtain two WLAN GPIOs to drive power and xcvr reset GPIO lines during start-up.
Rewrite the quirk to use a GPIO descriptor table so we avoid using global GPIO numbers.
This gets rid of the final dependency on the legacy <linux/gpio.h> header from the OMAP2/3 platforms.
Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/pdata-quirks.c | 41 ++++++++++++++++++++---------- 1 file changed, 28 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 3264c4e77a8aa..c1c0121f478d6 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -8,7 +8,6 @@ #include <linux/davinci_emac.h> #include <linux/gpio/machine.h> #include <linux/gpio/consumer.h> -#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/of_platform.h> @@ -178,25 +177,41 @@ static void __init am35xx_emac_reset(void) omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ }
-static struct gpio cm_t3517_wlan_gpios[] __initdata = { - { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" }, - { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" }, +static struct gpiod_lookup_table cm_t3517_wlan_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP("gpio-48-53", 8, "power", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0-15", 4, "noe", + GPIO_ACTIVE_HIGH), + { } + }, };
static void __init omap3_sbc_t3517_wifi_init(void) { - int err = gpio_request_array(cm_t3517_wlan_gpios, - ARRAY_SIZE(cm_t3517_wlan_gpios)); - if (err) { - pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err); - return; - } + struct gpio_desc *d;
- gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0); - gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0); + gpiod_add_lookup_table(&cm_t3517_wlan_gpio_table);
+ /* This asserts the RESET line (reverse polarity) */ + d = gpiod_get(NULL, "power", GPIOD_OUT_HIGH); + if (IS_ERR(d)) { + pr_err("Unable to get CM T3517 WLAN power GPIO descriptor\n"); + } else { + gpiod_set_consumer_name(d, "wlan pwr"); + gpiod_export(d, 0); + } + + d = gpiod_get(NULL, "noe", GPIOD_OUT_HIGH); + if (IS_ERR(d)) { + pr_err("Unable to get CM T3517 WLAN XCVR NOE GPIO descriptor\n"); + } else { + gpiod_set_consumer_name(d, "xcvr noe"); + gpiod_export(d, 0); + } msleep(100); - gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0); + gpiod_set_value(d, 0); }
static struct gpiod_lookup_table omap3_sbc_t3517_usb_gpio_table = {