6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Ford aford173@gmail.com
[ Upstream commit d567679f2b6a8bcea20589bbea6488c0236886cd ]
Currently, the calcuation for fld_tg_code is based on a lookup table, but there are gaps in the lookup table, and frequencies in these gaps may not properly use the correct divider. Based on the description of FLD_CK_DIV, the internal PLL frequency should be less than 50 MHz, so directly calcuate the value of FLD_CK_DIV from pixclk. This allow for proper calcuation of any pixel clock and eliminates a few gaps in the LUT.
Since the value of the int_pllclk is in Hz, do the fixed-point math in Hz to achieve a more accurate value and reduces the complexity of the caluation to 24MHz * (256 / int_pllclk).
Fixes: 6ad082bee902 ("phy: freescale: add Samsung HDMI PHY") Signed-off-by: Adam Ford aford173@gmail.com Reviewed-by: Frieder Schrempf frieder.schrempf@kontron.de Link: https://lore.kernel.org/r/20241026132014.73050-3-aford173@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 32 +++++++------------- 1 file changed, 11 insertions(+), 21 deletions(-)
diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c index 029de69fbeaf4..6801a09c86a77 100644 --- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c @@ -388,25 +388,17 @@ fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy, { u32 pclk = cfg->pixclk; u32 fld_tg_code; - u32 pclk_khz; - u8 div = 1; - - switch (cfg->pixclk) { - case 22250000 ... 47500000: - div = 1; - break; - case 50349650 ... 99000000: - div = 2; - break; - case 100699300 ... 198000000: - div = 4; - break; - case 205000000 ... 297000000: - div = 8; - break; + u32 int_pllclk; + u8 div; + + /* Find int_pllclk speed */ + for (div = 0; div < 4; div++) { + int_pllclk = pclk / (1 << div); + if (int_pllclk < (50 * MHZ)) + break; }
- writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG(12)); + writeb(FIELD_PREP(REG12_CK_DIV_MASK, div), phy->regs + PHY_REG(12));
/* * Calculation for the frequency lock detector target code (fld_tg_code) @@ -419,10 +411,8 @@ fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy, * settings rounding up always too. TODO: Check if that is * correct. */ - pclk /= div; - pclk_khz = pclk / 1000; - fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24; - fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000); + + fld_tg_code = DIV_ROUND_UP(24 * MHZ * 256, int_pllclk);
/* FLD_TOL and FLD_RP_CODE taken from downstream driver */ writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),