From: Matthias Schiffer matthias.schiffer@ew.tq-group.com
[ Upstream commit 67ca5159dbe2edb5dae7544447b8677d2596933a ]
It seems reasonable to fine-tune only some of the skew values when using one of the rgmii-*id PHY modes, and even when all skew values are specified, using the correct ID PHY mode makes sense for documentation purposes. Such a configuration also appears in the binding docs in Documentation/devicetree/bindings/net/micrel-ksz90x1.txt, so the driver should not warn about it.
Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com Link: https://lore.kernel.org/r/20211012103402.21438-1-matthias.schiffer@ew.tq-gro... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/micrel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 69b20a466c61c..b341a8be09f92 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -732,9 +732,9 @@ static int ksz9031_config_init(struct phy_device *phydev) MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, tx_data_skews, 4, &update);
- if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII) + if (update && !phy_interface_is_rgmii(phydev)) phydev_warn(phydev, - "*-skew-ps values should be used only with phy-mode = "rgmii"\n"); + "*-skew-ps values should be used only with RGMII PHY modes\n");
/* Silicon Errata Sheet (DS80000691D or DS80000692D): * When the device links in the 1000BASE-T slave mode only,