From: Tali Perry tali.perry1@gmail.com
[ Upstream commit 288b204492fddf28889cea6dc95a23976632c7a0 ]
Use adap.timeout for timeout calculation instead of hard-coded value of 35ms.
Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry tali.perry1@gmail.com Signed-off-by: Tyrone Ting kfting@nuvoton.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-npcm7xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c index 2ad166355ec9..92fd88a3f415 100644 --- a/drivers/i2c/busses/i2c-npcm7xx.c +++ b/drivers/i2c/busses/i2c-npcm7xx.c @@ -2047,7 +2047,7 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, u16 nwrite, nread; u8 *write_data, *read_data; u8 slave_addr; - int timeout; + unsigned long timeout; int ret = 0; bool read_block = false; bool read_PEC = false; @@ -2099,13 +2099,13 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, * 9: bits per transaction (including the ack/nack) */ timeout_usec = (2 * 9 * USEC_PER_SEC / bus->bus_freq) * (2 + nread + nwrite); - timeout = max(msecs_to_jiffies(35), usecs_to_jiffies(timeout_usec)); + timeout = max_t(unsigned long, bus->adap.timeout, usecs_to_jiffies(timeout_usec)); if (nwrite >= 32 * 1024 || nread >= 32 * 1024) { dev_err(bus->dev, "i2c%d buffer too big\n", bus->num); return -EINVAL; }
- time_left = jiffies + msecs_to_jiffies(DEFAULT_STALL_COUNT) + 1; + time_left = jiffies + timeout + 1; do { /* * we must clear slave address immediately when the bus is not @@ -2269,7 +2269,7 @@ static int npcm_i2c_probe_bus(struct platform_device *pdev) adap = &bus->adap; adap->owner = THIS_MODULE; adap->retries = 3; - adap->timeout = HZ; + adap->timeout = msecs_to_jiffies(35); adap->algo = &npcm_i2c_algo; adap->quirks = &npcm_i2c_quirks; adap->algo_data = bus;