6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Christopherson seanjc@google.com
commit c2fee09fc167c74a64adb08656cb993ea475197e upstream.
Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1).
L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_entry: vcpu 23
L1 writes DR7, L0 disables DR interception CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000007 CPU 23/KVM-5046 [001] d.... 3410.005613: kvm_entry: vcpu 23
L0 writes DR6 = 0 (arch.dr6) CPU 23/KVM-5046 [001] d.... 3410.005613: <hack>: Set DRs, DR6 = 0xffff0ff0
A: <L1 writes DR6 = 1, no interception, arch.dr6 is still '0'>
B: CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_exit: vcpu 23 reason PREEMPTION_TIMER CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_entry: vcpu 23
C: L0 writes DR6 = 0 (arch.dr6) CPU 23/KVM-5046 [001] d.... 3410.005614: <hack>: Set DRs, DR6 = 0xffff0ff0
L1 => L2 nested VM-Enter CPU 23/KVM-5046 [001] d.... 3410.005616: kvm_exit: vcpu 23 reason VMRESUME
L0 reads DR6, arch.dr6 = 0
Reported-by: John Stultz jstultz@google.com Closes: https://lkml.kernel.org/r/CANDhNCq5_F3HfFYABqFGCA1bPd_%2BxgNj-iDQhH4tDk%2Bwi... Fixes: 375e28ffc0cf ("KVM: X86: Set host DR6 only on VMX and for KVM_DEBUGREG_WONT_EXIT") Fixes: d67668e9dd76 ("KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6") Cc: stable@vger.kernel.org Cc: Jim Mattson jmattson@google.com Tested-by: John Stultz jstultz@google.com Link: https://lore.kernel.org/r/20250125011833.3644371-1-seanjc@google.com Signed-off-by: Sean Christopherson seanjc@google.com [jth: Handled conflicts with kvm_x86_ops reshuffle] Signed-off-by: James Houghton jthoughton@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/kvm-x86-ops.h | 1 + arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/svm/svm.c | 13 ++++++------- arch/x86/kvm/vmx/vmx.c | 11 +++++++---- arch/x86/kvm/x86.c | 3 +++ 5 files changed, 18 insertions(+), 11 deletions(-)
--- a/arch/x86/include/asm/kvm-x86-ops.h +++ b/arch/x86/include/asm/kvm-x86-ops.h @@ -48,6 +48,7 @@ KVM_X86_OP(set_idt) KVM_X86_OP(get_gdt) KVM_X86_OP(set_gdt) KVM_X86_OP(sync_dirty_debug_regs) +KVM_X86_OP(set_dr6) KVM_X86_OP(set_dr7) KVM_X86_OP(cache_reg) KVM_X86_OP(get_rflags) --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1595,6 +1595,7 @@ struct kvm_x86_ops { void (*get_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void (*set_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void (*sync_dirty_debug_regs)(struct kvm_vcpu *vcpu); + void (*set_dr6)(struct kvm_vcpu *vcpu, unsigned long value); void (*set_dr7)(struct kvm_vcpu *vcpu, unsigned long value); void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg); unsigned long (*get_rflags)(struct kvm_vcpu *vcpu); --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -2014,11 +2014,11 @@ static void new_asid(struct vcpu_svm *sv svm->asid = sd->next_asid++; }
-static void svm_set_dr6(struct vcpu_svm *svm, unsigned long value) +static void svm_set_dr6(struct kvm_vcpu *vcpu, unsigned long value) { - struct vmcb *vmcb = svm->vmcb; + struct vmcb *vmcb = to_svm(vcpu)->vmcb;
- if (svm->vcpu.arch.guest_state_protected) + if (vcpu->arch.guest_state_protected) return;
if (unlikely(value != vmcb->save.dr6)) { @@ -4220,10 +4220,8 @@ static __no_kcsan fastpath_t svm_vcpu_ru * Run with all-zero DR6 unless needed, so that we can get the exact cause * of a #DB. */ - if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) - svm_set_dr6(svm, vcpu->arch.dr6); - else - svm_set_dr6(svm, DR6_ACTIVE_LOW); + if (likely(!(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT))) + svm_set_dr6(vcpu, DR6_ACTIVE_LOW);
clgi(); kvm_load_guest_xsave_state(vcpu); @@ -5002,6 +5000,7 @@ static struct kvm_x86_ops svm_x86_ops __ .set_idt = svm_set_idt, .get_gdt = svm_get_gdt, .set_gdt = svm_set_gdt, + .set_dr6 = svm_set_dr6, .set_dr7 = svm_set_dr7, .sync_dirty_debug_regs = svm_sync_dirty_debug_regs, .cache_reg = svm_cache_reg, --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -5617,6 +5617,12 @@ static void vmx_sync_dirty_debug_regs(st set_debugreg(DR6_RESERVED, 6); }
+static void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val) +{ + lockdep_assert_irqs_disabled(); + set_debugreg(vcpu->arch.dr6, 6); +} + static void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val) { vmcs_writel(GUEST_DR7, val); @@ -7356,10 +7362,6 @@ static fastpath_t vmx_vcpu_run(struct kv vmx->loaded_vmcs->host_state.cr4 = cr4; }
- /* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */ - if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) - set_debugreg(vcpu->arch.dr6, 6); - /* When single-stepping over STI and MOV SS, we must clear the * corresponding interruptibility bits in the guest state. Otherwise * vmentry fails as it then expects bit 14 (BS) in pending debug @@ -8292,6 +8294,7 @@ static struct kvm_x86_ops vmx_x86_ops __ .set_idt = vmx_set_idt, .get_gdt = vmx_get_gdt, .set_gdt = vmx_set_gdt, + .set_dr6 = vmx_set_dr6, .set_dr7 = vmx_set_dr7, .sync_dirty_debug_regs = vmx_sync_dirty_debug_regs, .cache_reg = vmx_cache_reg, --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -10772,6 +10772,9 @@ static int vcpu_enter_guest(struct kvm_v set_debugreg(vcpu->arch.eff_db[1], 1); set_debugreg(vcpu->arch.eff_db[2], 2); set_debugreg(vcpu->arch.eff_db[3], 3); + /* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */ + if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) + static_call(kvm_x86_set_dr6)(vcpu, vcpu->arch.dr6); } else if (unlikely(hw_breakpoint_active())) { set_debugreg(0, 7); }