From: Pali Rohár pali@kernel.org
commit 96be36dbffacea0aa9e6ec4839583e79faa141a1 upstream.
PCI-E capability macros are already defined in linux/pci_regs.h. Remove their reimplementation in pcie-aardvark.
Link: https://lore.kernel.org/r/20200430080625.26070-9-pali@kernel.org Tested-by: Tomasz Maciej Nowak tmn505@gmail.com Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Rob Herring robh@kernel.org Acked-by: Thomas Petazzoni thomas.petazzoni@bootlin.com Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/controller/pci-aardvark.c | 41 ++++++++++++++-------------------- 1 file changed, 18 insertions(+), 23 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -32,17 +32,6 @@ #define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2) #define PCIE_CORE_DEV_REV_REG 0x8 #define PCIE_CORE_PCIEXP_CAP 0xc0 -#define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8 -#define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4) -#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5 -#define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11) -#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12 -#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2 -#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0 -#define PCIE_CORE_LINK_L0S_ENTRY BIT(0) -#define PCIE_CORE_LINK_TRAINING BIT(5) -#define PCIE_CORE_LINK_SPEED_SHIFT 16 -#define PCIE_CORE_LINK_WIDTH_SHIFT 20 #define PCIE_CORE_ERR_CAPCTL_REG 0x118 #define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5) #define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN BIT(6) @@ -267,6 +256,11 @@ static inline u32 advk_readl(struct advk return readl(pcie->base + reg); }
+static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg) +{ + return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8); +} + static u8 advk_pcie_ltssm_state(struct advk_pcie *pcie) { u32 val; @@ -366,16 +360,16 @@ static int advk_pcie_train_at_gen(struct * Start link training immediately after enabling it. * This solves problems for some buggy cards. */ - reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG); - reg |= PCIE_CORE_LINK_TRAINING; - advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG); + reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL); + reg |= PCI_EXP_LNKCTL_RL; + advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
ret = advk_pcie_wait_for_link(pcie); if (ret) return ret;
- reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG); - neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf; + reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA); + neg_gen = reg & PCI_EXP_LNKSTA_CLS;
return neg_gen; } @@ -470,13 +464,14 @@ static void advk_pcie_setup_hw(struct ad PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV; advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
- /* Set PCIe Device Control and Status 1 PF0 register */ - reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE | - (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) | - PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE | - (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ << - PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT); - advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG); + /* Set PCIe Device Control register */ + reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL); + reg &= ~PCI_EXP_DEVCTL_RELAX_EN; + reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN; + reg &= ~PCI_EXP_DEVCTL_READRQ; + reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */ + reg |= PCI_EXP_DEVCTL_READRQ_512B; + advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
/* Program PCIe Control 2 to disable strict ordering */ reg = PCIE_CORE_CTRL2_RESERVED |