From: Deepak Ukey deepak.ukey@microchip.com
[ Upstream commit 72349b62a571effd6faadd0600b8e657dd87afbf ]
When the firmware is not responding, execution of kexec boot causes a system hang. When firmware assertion happened, driver get notified with interrupt vector updated in MPI configuration table. Then, the driver will read scratchpad register and set controller_fatal_error flag to true.
Signed-off-by: Deepak Ukey deepak.ukey@microchip.com Signed-off-by: Viswas G Viswas.G@microchip.com Acked-by: Jack Wang jinpu.wang@profitbricks.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/pm8001/pm8001_hwi.c | 6 +++ drivers/scsi/pm8001/pm8001_sas.c | 7 +++ drivers/scsi/pm8001/pm8001_sas.h | 1 + drivers/scsi/pm8001/pm80xx_hwi.c | 80 +++++++++++++++++++++++++++++--- drivers/scsi/pm8001/pm80xx_hwi.h | 3 ++ 5 files changed, 91 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 4dd6cad330e8e..3e814c0469fbd 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1479,6 +1479,12 @@ u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha, } else { u32 producer_index; void *pi_virt = circularQ->pi_virt; + /* spurious interrupt during setup if + * kexec-ing and driver doing a doorbell access + * with the pre-kexec oq interrupt setup + */ + if (!pi_virt) + break; /* Update the producer index from SPC */ producer_index = pm8001_read_32(pi_virt); circularQ->producer_index = cpu_to_le32(producer_index); diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 576a0f091933b..59feda261e088 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -374,6 +374,13 @@ static int pm8001_task_exec(struct sas_task *task, return 0; } pm8001_ha = pm8001_find_ha_by_dev(task->dev); + if (pm8001_ha->controller_fatal_error) { + struct task_status_struct *ts = &t->task_status; + + ts->resp = SAS_TASK_UNDELIVERED; + t->task_done(t); + return 0; + } PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n ")); spin_lock_irqsave(&pm8001_ha->lock, flags); do { diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 80b4dd6df0c25..1816e351071fa 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -538,6 +538,7 @@ struct pm8001_hba_info { u32 logging_level; u32 fw_status; u32 smp_exp_mode; + bool controller_fatal_error; const struct firmware *fw_image; struct isr_param irq_vector[PM8001_MAX_MSIX_VEC]; u32 reset_in_progress; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 42f0405601ad1..5021aed87f33a 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -577,6 +577,9 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha) pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size); pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION, pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity); + /* Update Fatal error interrupt vector */ + pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |= + ((pm8001_ha->number_of_intr - 1) << 8); pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT, pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt); pm8001_mw32(address, MAIN_EVENT_CRC_CHECK, @@ -1110,6 +1113,9 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha) return -EBUSY; }
+ /* Initialize the controller fatal error flag */ + pm8001_ha->controller_fatal_error = false; + /* Initialize pci space address eg: mpi offset */ init_pci_device_addresses(pm8001_ha); init_default_table_values(pm8001_ha); @@ -1218,13 +1224,17 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) u32 bootloader_state; u32 ibutton0, ibutton1;
- /* Check if MPI is in ready state to reset */ - if (mpi_uninit_check(pm8001_ha) != 0) { - PM8001_FAIL_DBG(pm8001_ha, - pm8001_printk("MPI state is not ready\n")); - return -1; + /* Process MPI table uninitialization only if FW is ready */ + if (!pm8001_ha->controller_fatal_error) { + /* Check if MPI is in ready state to reset */ + if (mpi_uninit_check(pm8001_ha) != 0) { + regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( + "MPI state is not ready scratch1 :0x%x\n", + regval)); + return -1; + } } - /* checked for reset register normal state; 0x0 */ regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET); PM8001_INIT_DBG(pm8001_ha, @@ -3752,6 +3762,46 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb) } }
+static void print_scratchpad_registers(struct pm8001_hba_info *pm8001_ha) +{ + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_SCRATCH_PAD_0: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_SCRATCH_PAD_1:0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_SCRATCH_PAD_2: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_SCRATCH_PAD_3: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_HOST_SCRATCH_PAD_0: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_HOST_SCRATCH_PAD_1: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_HOST_SCRATCH_PAD_2: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_HOST_SCRATCH_PAD_3: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_HOST_SCRATCH_PAD_4: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_HOST_SCRATCH_PAD_5: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6))); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n", + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7))); +} + static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec) { struct outbound_queue_table *circularQ; @@ -3759,10 +3809,28 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec) u8 uninitialized_var(bc); u32 ret = MPI_IO_STATUS_FAIL; unsigned long flags; + u32 regval;
+ if (vec == (pm8001_ha->number_of_intr - 1)) { + regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + if ((regval & SCRATCH_PAD_MIPSALL_READY) != + SCRATCH_PAD_MIPSALL_READY) { + pm8001_ha->controller_fatal_error = true; + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( + "Firmware Fatal error! Regval:0x%x\n", regval)); + print_scratchpad_registers(pm8001_ha); + return ret; + } + } spin_lock_irqsave(&pm8001_ha->lock, flags); circularQ = &pm8001_ha->outbnd_q_tbl[vec]; do { + /* spurious interrupt during setup if kexec-ing and + * driver doing a doorbell access w/ the pre-kexec oq + * interrupt setup. + */ + if (!circularQ->pi_virt) + break; ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc); if (MPI_IO_STATUS_SUCCESS == ret) { /* process the outbound message */ diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h index 889e69ce3689b..7dd2699d0efb5 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.h +++ b/drivers/scsi/pm8001/pm80xx_hwi.h @@ -1384,6 +1384,9 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t; #define SCRATCH_PAD_BOOT_LOAD_SUCCESS 0x0 #define SCRATCH_PAD_IOP0_READY 0xC00 #define SCRATCH_PAD_IOP1_READY 0x3000 +#define SCRATCH_PAD_MIPSALL_READY (SCRATCH_PAD_IOP1_READY | \ + SCRATCH_PAD_IOP0_READY | \ + SCRATCH_PAD_RAAE_READY)
/* boot loader state */ #define SCRATCH_PAD1_BOOTSTATE_MASK 0x70 /* Bit 4-6 */