From: Peter Chen peter.chen@nxp.com
commit dc0ffbea5729a3abafa577ebfce87f18b79e294b upstream.
On some situations, the software handles TRB events slower than adding TRBs, then xhci_handle_event can't return zero long time, the xHC will consider the event ring is full, and trigger "Event Ring Full" error, but in fact, the software has already finished lots of events, just no chance to update ERDP (event ring dequeue pointer).
In this commit, we force update ERDP if half of TRBS_PER_SEGMENT events have handled to avoid "Event Ring Full" error.
Signed-off-by: Peter Chen peter.chen@nxp.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/1573836603-10871-2-git-send-email-mathias.nyman@li... Signed-off-by: Fabio Estevam festevam@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/host/xhci-ring.c | 60 ++++++++++++++++++++++++++++++------------- 1 file changed, 43 insertions(+), 17 deletions(-)
--- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2741,6 +2741,42 @@ static int xhci_handle_event(struct xhci }
/* + * Update Event Ring Dequeue Pointer: + * - When all events have finished + * - To avoid "Event Ring Full Error" condition + */ +static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, + union xhci_trb *event_ring_deq) +{ + u64 temp_64; + dma_addr_t deq; + + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + /* If necessary, update the HW's version of the event ring deq ptr. */ + if (event_ring_deq != xhci->event_ring->dequeue) { + deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, + xhci->event_ring->dequeue); + if (deq == 0) + xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n"); + /* + * Per 4.9.4, Software writes to the ERDP register shall + * always advance the Event Ring Dequeue Pointer value. + */ + if ((temp_64 & (u64) ~ERST_PTR_MASK) == + ((u64) deq & (u64) ~ERST_PTR_MASK)) + return; + + /* Update HC event ring dequeue pointer */ + temp_64 &= ERST_PTR_MASK; + temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK); + } + + /* Clear the event handler busy flag (RW1C) */ + temp_64 |= ERST_EHB; + xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue); +} + +/* * xHCI spec says we can get an interrupt, and if the HC has an error condition, * we might get bad data out of the event ring. Section 4.10.2.7 has a list of * indicators of an event TRB error, but we check the status *first* to be safe. @@ -2751,9 +2787,9 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd union xhci_trb *event_ring_deq; irqreturn_t ret = IRQ_NONE; unsigned long flags; - dma_addr_t deq; u64 temp_64; u32 status; + int event_loop = 0;
spin_lock_irqsave(&xhci->lock, flags); /* Check if the xHC generated the interrupt, or the irq is shared */ @@ -2807,24 +2843,14 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd /* FIXME this should be a delayed service routine * that clears the EHB. */ - while (xhci_handle_event(xhci) > 0) {} - - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); - /* If necessary, update the HW's version of the event ring deq ptr. */ - if (event_ring_deq != xhci->event_ring->dequeue) { - deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, - xhci->event_ring->dequeue); - if (deq == 0) - xhci_warn(xhci, "WARN something wrong with SW event " - "ring dequeue ptr.\n"); - /* Update HC event ring dequeue pointer */ - temp_64 &= ERST_PTR_MASK; - temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK); + while (xhci_handle_event(xhci) > 0) { + if (event_loop++ < TRBS_PER_SEGMENT / 2) + continue; + xhci_update_erst_dequeue(xhci, event_ring_deq); + event_loop = 0; }
- /* Clear the event handler busy flag (RW1C); event ring is empty. */ - temp_64 |= ERST_EHB; - xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue); + xhci_update_erst_dequeue(xhci, event_ring_deq); ret = IRQ_HANDLED;
out: