Re: [PATCH v2] driver core: Fix device link device name collision

Am 2021-01-08 00:41, schrieb Saravana Kannan:

The device link device's name was of the form: <supplier-dev-name>--<consumer-dev-name>

This can cause name collision as reported here [1] as device names are not globally unique. Since device names have to be unique within the bus/class, add the bus/class name as a prefix to the device names used to construct the device link device name.

So the devuce link device's name will be of the form: <supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name>

[1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/

Cc: stable@vger.kernel.org Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs") Reported-by: Michael Walle michael@walle.cc Signed-off-by: Saravana Kannan saravanak@google.com

---

This makes it even worse. Please see below for a full bootlog with the dev_dbg() converted to dev_info() and initcall_debug enabled.

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.11.0-rc2-next-20210107-00018-g832f4343aa38-dirty (mwalle@mwalle01) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #307 SMP PREEMPT Fri Jan 8 01:03:51 CET 2021 [ 0.000000] Machine model: Kontron KBox A-230-LS [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 32 MiB at 0x00000000fcc00000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000020ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x20ff7db200-0x20ff7dcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000020ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000002080000000-0x00000020ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000020ffffffff] [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 524288 pages, LIFO batch:63 [ 0.000000] Normal zone: 8192 pages used for memmap [ 0.000000] Normal zone: 524288 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 31 pages/cpu s89752 r8192 d29032 u126976 [ 0.000000] pcpu-alloc: s89752 r8192 d29032 u126976 alloc=31*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: debug root=/dev/mmcblk0p2 rootwait initcall_debug [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000f8c00000-0x00000000fcc00000] (64MB) [ 0.000000] Memory: 3987084K/4194304K available (14656K kernel code, 2024K rwdata, 5752K rodata, 4800K init, 850K bss, 174452K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 51338 entries in 201 pages [ 0.000000] ftrace: allocated 201 pages with 4 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006040000 [ 0.000000] ITS [mem 0x06020000-0x0603ffff] [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080180000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000002080200000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000002080210000 [ 0.000000] random: get_random_bytes called from start_kernel+0x668/0x830 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.000091] calling con_init+0x0/0x220 @ 0 [ 0.000129] Console: colour dummy device 80x25 [ 0.000402] printk: console [tty0] enabled [ 0.000409] initcall con_init+0x0/0x220 returned 0 after 0 usecs [ 0.000420] calling hvc_console_init+0x0/0x34 @ 0 [ 0.000429] initcall hvc_console_init+0x0/0x34 returned 0 after 0 usecs [ 0.000439] calling xen_cons_init+0x0/0x88 @ 0 [ 0.000450] initcall xen_cons_init+0x0/0x88 returned 0 after 0 usecs [ 0.000459] calling univ8250_console_init+0x0/0x50 @ 0 [ 0.000471] initcall univ8250_console_init+0x0/0x50 returned 0 after 0 usecs [ 0.000516] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.000532] pid_max: default: 32768 minimum: 301 [ 0.000577] LSM: Security Framework initializing [ 0.000629] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000664] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001530] calling trace_init_flags_sys_enter+0x0/0x2c @ 1 [ 0.001552] initcall trace_init_flags_sys_enter+0x0/0x2c returned 0 after 0 usecs [ 0.001565] calling trace_init_flags_sys_exit+0x0/0x2c @ 1 [ 0.001575] initcall trace_init_flags_sys_exit+0x0/0x2c returned 0 after 0 usecs [ 0.001587] calling cpu_suspend_init+0x0/0x58 @ 1 [ 0.001598] initcall cpu_suspend_init+0x0/0x58 returned 0 after 0 usecs [ 0.001610] calling asids_init+0x0/0xc8 @ 1 [ 0.001628] initcall asids_init+0x0/0xc8 returned 0 after 0 usecs [ 0.001638] calling xen_guest_init+0x0/0x34c @ 1 [ 0.001650] initcall xen_guest_init+0x0/0x34c returned 0 after 0 usecs [ 0.001661] calling spawn_ksoftirqd+0x0/0x58 @ 1 [ 0.001718] initcall spawn_ksoftirqd+0x0/0x58 returned 0 after 0 usecs [ 0.001731] calling migration_init+0x0/0x64 @ 1 [ 0.001740] initcall migration_init+0x0/0x64 returned 0 after 0 usecs [ 0.001749] calling srcu_bootup_announce+0x0/0x50 @ 1 [ 0.001759] rcu: Hierarchical SRCU implementation. [ 0.001766] initcall srcu_bootup_announce+0x0/0x50 returned 0 after 0 usecs [ 0.001777] calling rcu_spawn_core_kthreads+0x0/0xcc @ 1 [ 0.001787] initcall rcu_spawn_core_kthreads+0x0/0xcc returned 0 after 0 usecs [ 0.001799] calling rcu_spawn_gp_kthread+0x0/0x16c @ 1 [ 0.001854] initcall rcu_spawn_gp_kthread+0x0/0x16c returned 0 after 0 usecs [ 0.001868] calling check_cpu_stall_init+0x0/0x3c @ 1 [ 0.001878] initcall check_cpu_stall_init+0x0/0x3c returned 0 after 0 usecs [ 0.001889] calling rcu_sysrq_init+0x0/0x48 @ 1 [ 0.001898] initcall rcu_sysrq_init+0x0/0x48 returned 0 after 0 usecs [ 0.001909] calling cpu_stop_init+0x0/0xd8 @ 1 [ 0.001972] initcall cpu_stop_init+0x0/0xd8 returned 0 after 0 usecs [ 0.001986] calling init_events+0x0/0x68 @ 1 [ 0.002014] initcall init_events+0x0/0x68 returned 0 after 0 usecs [ 0.002026] calling init_trace_printk+0x0/0x28 @ 1 [ 0.002037] initcall init_trace_printk+0x0/0x28 returned 0 after 0 usecs [ 0.002049] calling event_trace_enable_again+0x0/0x38 @ 1 [ 0.002061] initcall event_trace_enable_again+0x0/0x38 returned 0 after 0 usecs [ 0.002074] calling jump_label_init_module+0x0/0x2c @ 1 [ 0.002083] initcall jump_label_init_module+0x0/0x2c returned 0 after 0 usecs [ 0.002092] calling initialize_ptr_random+0x0/0x70 @ 1 [ 0.002105] initcall initialize_ptr_random+0x0/0x70 returned 0 after 0 usecs [ 0.002116] calling its_pmsi_init+0x0/0xb8 @ 1 [ 0.002158] Platform MSI: gic-its@6020000 domain created [ 0.002224] initcall its_pmsi_init+0x0/0xb8 returned 0 after 0 usecs [ 0.002236] calling its_pci_msi_init+0x0/0xd4 @ 1 [ 0.002263] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created [ 0.002304] initcall its_pci_msi_init+0x0/0xd4 returned 0 after 0 usecs [ 0.002316] calling brcmstb_soc_device_early_init+0x0/0xb0 @ 1 [ 0.002493] initcall brcmstb_soc_device_early_init+0x0/0xb0 returned 0 after 0 usecs [ 0.002506] calling brcmstb_biuctrl_init+0x0/0x468 @ 1 [ 0.002546] initcall brcmstb_biuctrl_init+0x0/0x468 returned 0 after 0 usecs [ 0.002558] calling efi_memreserve_root_init+0x0/0x48 @ 1 [ 0.002571] initcall efi_memreserve_root_init+0x0/0x48 returned 0 after 0 usecs [ 0.002582] calling arm_enable_runtime_services+0x0/0x1fc @ 1 [ 0.002593] EFI services will not be available. [ 0.002600] initcall arm_enable_runtime_services+0x0/0x1fc returned 0 after 0 usecs [ 0.002612] calling efi_earlycon_remap_fb+0x0/0x84 @ 1 [ 0.002623] initcall efi_earlycon_remap_fb+0x0/0x84 returned 0 after 0 usecs [ 0.002634] calling dummy_timer_register+0x0/0x44 @ 1 [ 0.002647] initcall dummy_timer_register+0x0/0x44 returned 0 after 0 usecs [ 0.002744] smp: Bringing up secondary CPUs ... [ 0.003018] Detected PIPT I-cache on CPU1 [ 0.003039] GICv3: CPU1: found redistributor 1 region 0:0x0000000006060000 [ 0.003048] GICv3: CPU1: using allocated LPI pending table @0x0000002080220000 [ 0.003078] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.003145] smp: Brought up 1 node, 2 CPUs [ 0.003174] SMP: Total of 2 processors activated. [ 0.003182] CPU features: detected: 32-bit EL0 Support [ 0.003190] CPU features: detected: CRC32 instructions [ 0.003198] CPU features: detected: 32-bit EL1 Support [ 0.012521] CPU: All CPU(s) started at EL2 [ 0.012548] alternatives: patching kernel code [ 0.013286] devtmpfs: initialized [ 0.015387] calling bpf_jit_charge_init+0x0/0x4c @ 1 [ 0.015411] initcall bpf_jit_charge_init+0x0/0x4c returned 0 after 0 usecs [ 0.015422] calling ipc_ns_init+0x0/0x4c @ 1 [ 0.015438] initcall ipc_ns_init+0x0/0x4c returned 0 after 0 usecs [ 0.015448] calling init_mmap_min_addr+0x0/0x28 @ 1 [ 0.015458] initcall init_mmap_min_addr+0x0/0x28 returned 0 after 0 usecs [ 0.015468] calling pci_realloc_setup_params+0x0/0x54 @ 1 [ 0.015478] initcall pci_realloc_setup_params+0x0/0x54 returned 0 after 0 usecs [ 0.015488] calling net_ns_init+0x0/0x164 @ 1 [ 0.015649] initcall net_ns_init+0x0/0x164 returned 0 after 0 usecs [ 0.015666] calling inet_frag_wq_init+0x0/0x5c @ 1 [ 0.015735] initcall inet_frag_wq_init+0x0/0x5c returned 0 after 0 usecs [ 0.015784] calling fpsimd_init+0x0/0xd4 @ 1 [ 0.015800] initcall fpsimd_init+0x0/0xd4 returned 0 after 0 usecs [ 0.015810] calling tagged_addr_init+0x0/0x40 @ 1 [ 0.015827] initcall tagged_addr_init+0x0/0x40 returned 0 after 0 usecs [ 0.015837] calling enable_mrs_emulation+0x0/0x34 @ 1 [ 0.015848] initcall enable_mrs_emulation+0x0/0x34 returned 0 after 0 usecs [ 0.015859] calling kaslr_init+0x0/0x84 @ 1 [ 0.015870] KASLR disabled due to lack of seed [ 0.015876] initcall kaslr_init+0x0/0x84 returned 0 after 0 usecs [ 0.015886] calling map_entry_trampoline+0x0/0x118 @ 1 [ 0.015910] initcall map_entry_trampoline+0x0/0x118 returned 0 after 0 usecs [ 0.015922] calling alloc_frozen_cpus+0x0/0x18 @ 1 [ 0.015932] initcall alloc_frozen_cpus+0x0/0x18 returned 0 after 0 usecs [ 0.015941] calling cpu_hotplug_pm_sync_init+0x0/0x34 @ 1 [ 0.015951] initcall cpu_hotplug_pm_sync_init+0x0/0x34 returned 0 after 0 usecs [ 0.015961] calling wq_sysfs_init+0x0/0x50 @ 1 [ 0.016003] initcall wq_sysfs_init+0x0/0x50 returned 0 after 3906 usecs [ 0.016015] calling ksysfs_init+0x0/0xc8 @ 1 [ 0.016036] initcall ksysfs_init+0x0/0xc8 returned 0 after 0 usecs [ 0.016046] calling schedutil_gov_init+0x0/0x2c @ 1 [ 0.016056] initcall schedutil_gov_init+0x0/0x2c returned 0 after 0 usecs [ 0.016066] calling pm_init+0x0/0x88 @ 1 [ 0.016105] initcall pm_init+0x0/0x88 returned 0 after 0 usecs [ 0.016116] calling pm_disk_init+0x0/0x34 @ 1 [ 0.016130] initcall pm_disk_init+0x0/0x34 returned 0 after 0 usecs [ 0.016140] calling swsusp_header_init+0x0/0x48 @ 1 [ 0.016150] initcall swsusp_header_init+0x0/0x48 returned 0 after 0 usecs [ 0.016160] calling rcu_set_runtime_mode+0x0/0x34 @ 1 [ 0.016171] initcall rcu_set_runtime_mode+0x0/0x34 returned 0 after 0 usecs [ 0.016182] calling dma_init_reserved_memory+0x0/0x74 @ 1 [ 0.016192] initcall dma_init_reserved_memory+0x0/0x74 returned -12 after 0 usecs [ 0.016204] calling dma_debug_init+0x0/0x220 @ 1 [ 0.021946] DMA-API: preallocated 65536 debug entries [ 0.021969] DMA-API: debugging enabled by kernel config [ 0.021977] initcall dma_debug_init+0x0/0x220 returned 0 after 3906 usecs [ 0.021997] calling init_jiffies_clocksource+0x0/0x34 @ 1 [ 0.022011] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.022025] initcall init_jiffies_clocksource+0x0/0x34 returned 0 after 0 usecs [ 0.022037] calling futex_init+0x0/0x114 @ 1 [ 0.022052] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.022085] initcall futex_init+0x0/0x114 returned 0 after 0 usecs [ 0.022096] calling cgroup_wq_init+0x0/0x48 @ 1 [ 0.022121] initcall cgroup_wq_init+0x0/0x48 returned 0 after 0 usecs [ 0.022132] calling cgroup1_wq_init+0x0/0x48 @ 1 [ 0.022146] initcall cgroup1_wq_init+0x0/0x48 returned 0 after 0 usecs [ 0.022158] calling ftrace_mod_cmd_init+0x0/0x28 @ 1 [ 0.022170] initcall ftrace_mod_cmd_init+0x0/0x28 returned 0 after 0 usecs [ 0.022181] calling init_graph_trace+0x0/0x88 @ 1 [ 0.022201] initcall init_graph_trace+0x0/0x88 returned 0 after 0 usecs [ 0.022213] calling cpu_pm_init+0x0/0x30 @ 1 [ 0.022226] initcall cpu_pm_init+0x0/0x30 returned 0 after 0 usecs [ 0.022236] calling init_zero_pfn+0x0/0x38 @ 1 [ 0.022245] initcall init_zero_pfn+0x0/0x38 returned 0 after 0 usecs [ 0.022254] calling mem_cgroup_swap_init+0x0/0x80 @ 1 [ 0.022276] initcall mem_cgroup_swap_init+0x0/0x80 returned 0 after 0 usecs [ 0.022286] calling memory_failure_init+0x0/0xb0 @ 1 [ 0.022297] initcall memory_failure_init+0x0/0xb0 returned 0 after 0 usecs [ 0.022307] calling cma_init_reserved_areas+0x0/0x194 @ 1 [ 0.022790] initcall cma_init_reserved_areas+0x0/0x194 returned 0 after 0 usecs [ 0.022804] calling fsnotify_init+0x0/0x64 @ 1 [ 0.022841] initcall fsnotify_init+0x0/0x64 returned 0 after 0 usecs [ 0.022854] calling filelock_init+0x0/0xdc @ 1 [ 0.022876] initcall filelock_init+0x0/0xdc returned 0 after 0 usecs [ 0.022888] calling init_script_binfmt+0x0/0x34 @ 1 [ 0.022899] initcall init_script_binfmt+0x0/0x34 returned 0 after 0 usecs [ 0.022910] calling init_elf_binfmt+0x0/0x34 @ 1 [ 0.022920] initcall init_elf_binfmt+0x0/0x34 returned 0 after 0 usecs [ 0.022931] calling init_compat_elf_binfmt+0x0/0x34 @ 1 [ 0.022942] initcall init_compat_elf_binfmt+0x0/0x34 returned 0 after 0 usecs [ 0.022953] calling configfs_init+0x0/0xc4 @ 1 [ 0.022975] initcall configfs_init+0x0/0xc4 returned 0 after 0 usecs [ 0.022987] calling debugfs_init+0x0/0x98 @ 1 [ 0.022998] initcall debugfs_init+0x0/0x98 returned 0 after 0 usecs [ 0.023008] calling tracefs_init+0x0/0x5c @ 1 [ 0.023018] initcall tracefs_init+0x0/0x5c returned 0 after 0 usecs [ 0.023028] calling securityfs_init+0x0/0xa0 @ 1 [ 0.023096] initcall securityfs_init+0x0/0xa0 returned 0 after 0 usecs [ 0.023130] calling prandom_init_early+0x0/0x12c @ 1 [ 0.023142] initcall prandom_init_early+0x0/0x12c returned 0 after 0 usecs [ 0.023152] calling pinctrl_init+0x0/0xd0 @ 1 [ 0.023163] pinctrl core: initialized pinctrl subsystem [ 0.023194] initcall pinctrl_init+0x0/0xd0 returned 0 after 0 usecs [ 0.023206] calling gpiolib_dev_init+0x0/0x11c @ 1 [ 0.023244] initcall gpiolib_dev_init+0x0/0x11c returned 0 after 0 usecs [ 0.023257] calling fsl_guts_init+0x0/0x30 @ 1 [ 0.023282] initcall fsl_guts_init+0x0/0x30 returned 0 after 0 usecs [ 0.023295] calling virtio_init+0x0/0x40 @ 1 [ 0.023320] initcall virtio_init+0x0/0x40 returned 0 after 0 usecs [ 0.023332] calling regulator_init+0x0/0xc4 @ 1 [ 0.023492] initcall regulator_init+0x0/0xc4 returned 0 after 0 usecs [ 0.023506] calling iommu_init+0x0/0x50 @ 1 [ 0.023522] [ 0.023527] ************************************************************* [ 0.023534] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.023541] ** ** [ 0.023548] ** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL ** [ 0.023555] ** ** [ 0.023561] ** This means that this kernel is built to expose internal ** [ 0.023567] ** IOMMU data structures, which may compromise security on ** [ 0.023574] ** your system. ** [ 0.023581] ** ** [ 0.023587] ** If you see this message and you are not debugging the ** [ 0.023594] ** kernel, report this immediately to your vendor! ** [ 0.023600] ** ** [ 0.023606] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.023613] ************************************************************* [ 0.023619] initcall iommu_init+0x0/0x50 returned 0 after 0 usecs [ 0.023630] calling component_debug_init+0x0/0x3c @ 1 [ 0.023643] initcall component_debug_init+0x0/0x3c returned 0 after 0 usecs [ 0.023654] calling genpd_bus_init+0x0/0x30 @ 1 [ 0.023675] initcall genpd_bus_init+0x0/0x30 returned 0 after 0 usecs [ 0.023686] calling soc_bus_register+0x0/0x64 @ 1 [ 0.023707] initcall soc_bus_register+0x0/0x64 returned 0 after 0 usecs [ 0.023718] calling register_cpufreq_notifier+0x0/0x70 @ 1 [ 0.023728] initcall register_cpufreq_notifier+0x0/0x70 returned -22 after 0 usecs [ 0.023740] calling opp_debug_init+0x0/0x3c @ 1 [ 0.023761] initcall opp_debug_init+0x0/0x3c returned 0 after 0 usecs [ 0.023772] calling cpufreq_core_init+0x0/0x88 @ 1 [ 0.023786] initcall cpufreq_core_init+0x0/0x88 returned 0 after 0 usecs [ 0.023796] calling cpufreq_gov_performance_init+0x0/0x2c @ 1 [ 0.023807] initcall cpufreq_gov_performance_init+0x0/0x2c returned 0 after 0 usecs [ 0.023819] calling cpufreq_gov_userspace_init+0x0/0x2c @ 1 [ 0.023829] initcall cpufreq_gov_userspace_init+0x0/0x2c returned 0 after 0 usecs [ 0.023840] calling CPU_FREQ_GOV_ONDEMAND_init+0x0/0x30 @ 1 [ 0.023850] initcall CPU_FREQ_GOV_ONDEMAND_init+0x0/0x30 returned 0 after 0 usecs [ 0.023861] calling cpufreq_dt_platdev_init+0x0/0x150 @ 1 [ 0.023896] initcall cpufreq_dt_platdev_init+0x0/0x150 returned -19 after 0 usecs [ 0.023908] calling cpuidle_init+0x0/0x40 @ 1 [ 0.023924] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs [ 0.023935] calling capsule_reboot_register+0x0/0x30 @ 1 [ 0.023947] initcall capsule_reboot_register+0x0/0x30 returned 0 after 0 usecs [ 0.023959] calling arm_dmi_init+0x0/0x28 @ 1 [ 0.023970] DMI not present or invalid. [ 0.023976] initcall arm_dmi_init+0x0/0x28 returned 0 after 0 usecs [ 0.023987] calling sock_init+0x0/0xc4 @ 1 [ 0.024216] initcall sock_init+0x0/0xc4 returned 0 after 0 usecs [ 0.024230] calling net_inuse_init+0x0/0x40 @ 1 [ 0.024244] initcall net_inuse_init+0x0/0x40 returned 0 after 0 usecs [ 0.024255] calling net_defaults_init+0x0/0x40 @ 1 [ 0.024264] initcall net_defaults_init+0x0/0x40 returned 0 after 0 usecs [ 0.024274] calling init_default_flow_dissectors+0x0/0x6c @ 1 [ 0.024286] initcall init_default_flow_dissectors+0x0/0x6c returned 0 after 0 usecs [ 0.024297] calling netlink_proto_init+0x0/0x178 @ 1 [ 0.024356] NET: Registered protocol family 16 [ 0.024384] initcall netlink_proto_init+0x0/0x178 returned 0 after 0 usecs [ 0.024396] calling genl_init+0x0/0x5c @ 1 [ 0.024413] initcall genl_init+0x0/0x5c returned 0 after 0 usecs [ 0.024424] calling trace_boot_init+0x0/0xf0 @ 1 [ 0.024434] initcall trace_boot_init+0x0/0xf0 returned 0 after 0 usecs [ 0.024443] calling __gnttab_init+0x0/0x48 @ 1 [ 0.024454] initcall __gnttab_init+0x0/0x48 returned -19 after 0 usecs [ 0.024529] calling debug_monitors_init+0x0/0x44 @ 1 [ 0.024581] initcall debug_monitors_init+0x0/0x44 returned 0 after 0 usecs [ 0.024593] calling irq_sysfs_init+0x0/0xc0 @ 1 [ 0.024715] initcall irq_sysfs_init+0x0/0xc0 returned 0 after 0 usecs [ 0.024726] calling dma_atomic_pool_init+0x0/0x154 @ 1 [ 0.025299] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.025408] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.025580] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.025608] initcall dma_atomic_pool_init+0x0/0x154 returned 0 after 0 usecs [ 0.025621] calling audit_init+0x0/0x154 @ 1 [ 0.025636] audit: initializing netlink subsys (disabled) [ 0.025758] initcall audit_init+0x0/0x154 returned 0 after 0 usecs [ 0.025761] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1 [ 0.025767] calling release_early_probes+0x0/0x64 @ 1 [ 0.025784] initcall release_early_probes+0x0/0x64 returned 0 after 0 usecs [ 0.025796] calling bdi_class_init+0x0/0x88 @ 1 [ 0.025820] initcall bdi_class_init+0x0/0x88 returned 0 after 0 usecs [ 0.025830] calling mm_sysfs_init+0x0/0x4c @ 1 [ 0.025842] initcall mm_sysfs_init+0x0/0x4c returned 0 after 0 usecs [ 0.025852] calling init_per_zone_wmark_min+0x0/0x90 @ 1 [ 0.025870] initcall init_per_zone_wmark_min+0x0/0x90 returned 0 after 0 usecs [ 0.025882] calling mpi_init+0x0/0x8c @ 1 [ 0.025894] initcall mpi_init+0x0/0x8c returned 0 after 0 usecs [ 0.025904] calling kobject_uevent_init+0x0/0x24 @ 1 [ 0.025919] initcall kobject_uevent_init+0x0/0x24 returned 0 after 0 usecs [ 0.025931] calling acpi_gpio_setup_params+0x0/0x80 @ 1 [ 0.025944] initcall acpi_gpio_setup_params+0x0/0x80 returned 0 after 0 usecs [ 0.025956] calling pcibus_class_init+0x0/0x34 @ 1 [ 0.025975] initcall pcibus_class_init+0x0/0x34 returned 0 after 0 usecs [ 0.025988] calling pci_driver_init+0x0/0x5c @ 1 [ 0.026021] initcall pci_driver_init+0x0/0x5c returned 0 after 0 usecs [ 0.026031] calling backlight_class_init+0x0/0xcc @ 1 [ 0.026046] initcall backlight_class_init+0x0/0xcc returned 0 after 0 usecs [ 0.026056] calling amba_init+0x0/0x2c @ 1 [ 0.026077] initcall amba_init+0x0/0x2c returned 0 after 0 usecs [ 0.026088] calling xenbus_init+0x0/0x29c @ 1 [ 0.026097] initcall xenbus_init+0x0/0x29c returned -19 after 0 usecs [ 0.026106] calling tty_class_init+0x0/0x68 @ 1 [ 0.026120] initcall tty_class_init+0x0/0x68 returned 0 after 0 usecs [ 0.026130] calling vtconsole_class_init+0x0/0x104 @ 1 [ 0.026176] initcall vtconsole_class_init+0x0/0x104 returned 0 after 0 usecs [ 0.026187] calling serdev_init+0x0/0x3c @ 1 [ 0.026210] initcall serdev_init+0x0/0x3c returned 0 after 0 usecs [ 0.026221] calling iommu_dev_init+0x0/0x34 @ 1 [ 0.026237] initcall iommu_dev_init+0x0/0x34 returned 0 after 0 usecs [ 0.026248] calling mipi_dsi_bus_init+0x0/0x2c @ 1 [ 0.026267] initcall mipi_dsi_bus_init+0x0/0x2c returned 0 after 0 usecs [ 0.026278] calling devlink_class_init+0x0/0x70 @ 1 [ 0.026293] initcall devlink_class_init+0x0/0x70 returned 0 after 0 usecs [ 0.026304] calling software_node_init+0x0/0x50 @ 1 [ 0.026316] initcall software_node_init+0x0/0x50 returned 0 after 0 usecs [ 0.026327] calling wakeup_sources_debugfs_init+0x0/0x44 @ 1 [ 0.026341] initcall wakeup_sources_debugfs_init+0x0/0x44 returned 0 after 0 usecs [ 0.026354] calling wakeup_sources_sysfs_init+0x0/0x50 @ 1 [ 0.026370] initcall wakeup_sources_sysfs_init+0x0/0x50 returned 0 after 0 usecs [ 0.026382] calling register_node_type+0x0/0x30 @ 1 [ 0.026424] initcall register_node_type+0x0/0x30 returned 0 after 0 usecs [ 0.026436] calling regmap_initcall+0x0/0x28 @ 1 [ 0.026449] initcall regmap_initcall+0x0/0x28 returned 0 after 0 usecs [ 0.026461] calling sram_init+0x0/0x30 @ 1 [ 0.026483] initcall sram_init+0x0/0x30 returned 0 after 0 usecs [ 0.026495] calling syscon_init+0x0/0x34 @ 1 [ 0.026513] initcall syscon_init+0x0/0x34 returned 0 after 0 usecs [ 0.026525] calling spi_init+0x0/0xd4 @ 1 [ 0.026551] initcall spi_init+0x0/0xd4 returned 0 after 0 usecs [ 0.026563] calling spmi_init+0x0/0x40 @ 1 [ 0.026585] initcall spmi_init+0x0/0x40 returned 0 after 0 usecs [ 0.026597] calling i2c_init+0x0/0x10c @ 1 [ 0.026629] initcall i2c_init+0x0/0x10c returned 0 after 0 usecs [ 0.026640] calling thermal_init+0x0/0x15c @ 1 [ 0.026666] thermal_sys: Registered thermal governor 'step_wise' [ 0.026818] initcall thermal_init+0x0/0x15c returned 0 after 0 usecs [ 0.026835] calling init_menu+0x0/0x2c @ 1 [ 0.026932] cpuidle: using governor menu [ 0.026941] initcall init_menu+0x0/0x2c returned 0 after 0 usecs [ 0.026953] calling pcc_init+0x0/0x74 @ 1 [ 0.026962] initcall pcc_init+0x0/0x74 returned -19 after 0 usecs [ 0.026971] calling rpmsg_init+0x0/0x5c @ 1 [ 0.026997] initcall rpmsg_init+0x0/0x5c returned 0 after 0 usecs [ 0.027057] calling reserve_memblock_reserved_regions+0x0/0x16c @ 1 [ 0.027088] initcall reserve_memblock_reserved_regions+0x0/0x16c returned 0 after 0 usecs [ 0.027101] calling aarch32_alloc_vdso_pages+0x0/0xd8 @ 1 [ 0.027118] initcall aarch32_alloc_vdso_pages+0x0/0xd8 returned 0 after 0 usecs [ 0.027129] calling vdso_init+0x0/0xf8 @ 1 [ 0.027139] initcall vdso_init+0x0/0xf8 returned 0 after 0 usecs [ 0.027149] calling arch_hw_breakpoint_init+0x0/0x100 @ 1 [ 0.027162] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.027196] initcall arch_hw_breakpoint_init+0x0/0x100 returned 0 after 0 usecs [ 0.027210] calling asids_update_limit+0x0/0xe8 @ 1 [ 0.027221] ASID allocator initialised with 65536 entries [ 0.027229] initcall asids_update_limit+0x0/0xe8 returned 0 after 0 usecs [ 0.027239] calling hugetlbpage_init+0x0/0x44 @ 1 [ 0.027252] initcall hugetlbpage_init+0x0/0x44 returned 0 after 0 usecs [ 0.027264] calling p2m_init+0x0/0x20 @ 1 [ 0.027276] initcall p2m_init+0x0/0x20 returned 0 after 0 usecs [ 0.027287] calling xen_mm_init+0x0/0x9c @ 1 [ 0.027298] initcall xen_mm_init+0x0/0x9c returned 0 after 0 usecs [ 0.027309] calling cryptomgr_init+0x0/0x2c @ 1 [ 0.027319] initcall cryptomgr_init+0x0/0x2c returned 0 after 0 usecs [ 0.027329] calling mpc8xxx_init+0x0/0x30 @ 1 [ 0.027353] initcall mpc8xxx_init+0x0/0x30 returned 0 after 0 usecs [ 0.027365] calling acpi_pci_init+0x0/0x8c @ 1 [ 0.027374] initcall acpi_pci_init+0x0/0x8c returned 0 after 0 usecs [ 0.027383] calling dma_channel_table_init+0x0/0x110 @ 1 [ 0.027412] initcall dma_channel_table_init+0x0/0x110 returned 0 after 0 usecs [ 0.027426] calling dma_bus_init+0x0/0x144 @ 1 [ 0.027489] initcall dma_bus_init+0x0/0x144 returned 0 after 0 usecs [ 0.027503] calling brcmstb_soc_device_init+0x0/0x144 @ 1 [ 0.027702] initcall brcmstb_soc_device_init+0x0/0x144 returned 0 after 0 usecs [ 0.027716] calling register_xen_platform_notifier+0x0/0x60 @ 1 [ 0.027725] initcall register_xen_platform_notifier+0x0/0x60 returned 0 after 0 usecs [ 0.027736] calling register_xen_amba_notifier+0x0/0x64 @ 1 [ 0.027745] initcall register_xen_amba_notifier+0x0/0x64 returned 0 after 0 usecs [ 0.027755] calling register_xen_pci_notifier+0x0/0x54 @ 1 [ 0.027763] initcall register_xen_pci_notifier+0x0/0x54 returned 0 after 0 usecs [ 0.027773] calling pl011_init+0x0/0x60 @ 1 [ 0.027782] Serial: AMBA PL011 UART driver [ 0.027805] initcall pl011_init+0x0/0x60 returned 0 after 0 usecs [ 0.027815] calling cdns_uart_init+0x0/0x30 @ 1 [ 0.027834] initcall cdns_uart_init+0x0/0x30 returned 0 after 0 usecs [ 0.027845] calling iommu_dma_init+0x0/0x28 @ 1 [ 0.027859] initcall iommu_dma_init+0x0/0x28 returned 0 after 0 usecs [ 0.027869] calling dmi_id_init+0x0/0x2ec @ 1 [ 0.027879] initcall dmi_id_init+0x0/0x2ec returned -19 after 0 usecs [ 0.027890] calling of_platform_default_populate_init+0x0/0xdc @ 1 [ 0.029562] Machine: Kontron KBox A-230-LS [ 0.029572] SoC family: QorIQ LS1028A [ 0.029578] SoC ID: svr:0x870b0110, Revision: 1.0 [ 0.030276] platform 20c0000.spi: Linked as a sync state only consumer to 1e00900.clock-controller [ 0.031139] platform 2270000.serial: Linked as a sync state only consumer to 22c0000.dma-controller [ 0.031174] platform 2120000.spi: Linked as a sync state only consumer to 22c0000.dma-controller [ 0.031599] platform 2000000.i2c: Linked as a sync state only consumer to 2310000.gpio [ 0.034347] platform 3500000.pcie: Linked as a sync state only consumer to 5000000.iommu [ 0.034392] platform 3400000.pcie: Linked as a sync state only consumer to 5000000.iommu [ 0.034425] platform 3200000.sata: Linked as a sync state only consumer to 5000000.iommu [ 0.034459] platform 3110000.usb: Linked as a sync state only consumer to 5000000.iommu [ 0.034491] platform 3100000.usb: Linked as a sync state only consumer to 5000000.iommu [ 0.034527] platform 22c0000.dma-controller: Linked as a sync state only consumer to 5000000.iommu [ 0.034562] platform 2150000.mmc: Linked as a sync state only consumer to 5000000.iommu [ 0.034594] platform 2140000.mmc: Linked as a sync state only consumer to 5000000.iommu [ 0.034732] platform 8000000.crypto: Linked as a sync state only consumer to 5000000.iommu [ 0.034997] platform 8380000.dma-controller: Linked as a sync state only consumer to 5000000.iommu [ 0.035422] platform 1f0000000.pcie: Linked as a sync state only consumer to 5000000.iommu [ 0.035799] platform f080000.display: Linked as a sync state only consumer to f1f0000.clock-controller [ 0.035835] platform f080000.display: Linked as a sync state only consumer to 5000000.iommu [ 0.036059] initcall of_platform_default_populate_init+0x0/0xdc returned 0 after 11718 usecs [ 0.036136] calling topology_init+0x0/0x130 @ 1 [ 0.036275] initcall topology_init+0x0/0x130 returned 0 after 0 usecs [ 0.036288] calling uid_cache_init+0x0/0xac @ 1 [ 0.036307] initcall uid_cache_init+0x0/0xac returned 0 after 0 usecs [ 0.036318] calling param_sysfs_init+0x0/0x1e8 @ 1 [ 0.041132] initcall param_sysfs_init+0x0/0x1e8 returned 0 after 3906 usecs [ 0.041148] calling user_namespace_sysctl_init+0x0/0x5c @ 1 [ 0.041177] initcall user_namespace_sysctl_init+0x0/0x5c returned 0 after 0 usecs [ 0.041189] calling pm_sysrq_init+0x0/0x34 @ 1 [ 0.041321] initcall pm_sysrq_init+0x0/0x34 returned 0 after 0 usecs [ 0.041336] calling create_proc_profile+0x0/0x118 @ 1 [ 0.041350] initcall create_proc_profile+0x0/0x118 returned 0 after 0 usecs [ 0.041362] calling time_ns_init+0x0/0x18 @ 1 [ 0.041373] initcall time_ns_init+0x0/0x18 returned 0 after 0 usecs [ 0.041383] calling crash_save_vmcoreinfo_init+0x0/0x694 @ 1 [ 0.041466] initcall crash_save_vmcoreinfo_init+0x0/0x694 returned 0 after 0 usecs [ 0.041480] calling crash_notes_memory_init+0x0/0x50 @ 1 [ 0.041497] initcall crash_notes_memory_init+0x0/0x50 returned 0 after 0 usecs [ 0.041510] calling cgroup_sysfs_init+0x0/0x38 @ 1 [ 0.041528] initcall cgroup_sysfs_init+0x0/0x38 returned 0 after 0 usecs [ 0.041539] calling cgroup_namespaces_init+0x0/0x18 @ 1 [ 0.041550] initcall cgroup_namespaces_init+0x0/0x18 returned 0 after 0 usecs [ 0.041562] calling user_namespaces_init+0x0/0x48 @ 1 [ 0.041585] initcall user_namespaces_init+0x0/0x48 returned 0 after 0 usecs [ 0.041597] calling oom_init+0x0/0x4c @ 1 [ 0.041661] initcall oom_init+0x0/0x4c returned 0 after 0 usecs [ 0.041675] calling default_bdi_init+0x0/0xa8 @ 1 [ 0.041796] initcall default_bdi_init+0x0/0xa8 returned 0 after 0 usecs [ 0.041809] calling cgwb_init+0x0/0x4c @ 1 [ 0.041822] initcall cgwb_init+0x0/0x4c returned 0 after 0 usecs [ 0.041832] calling percpu_enable_async+0x0/0x24 @ 1 [ 0.041841] initcall percpu_enable_async+0x0/0x24 returned 0 after 0 usecs [ 0.041850] calling kcompactd_init+0x0/0xcc @ 1 [ 0.041912] initcall kcompactd_init+0x0/0xcc returned 0 after 0 usecs [ 0.041925] calling init_user_reserve+0x0/0x40 @ 1 [ 0.041936] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs [ 0.041946] calling init_admin_reserve+0x0/0x40 @ 1 [ 0.041954] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs [ 0.041963] calling init_reserve_notifier+0x0/0x10 @ 1 [ 0.041976] initcall init_reserve_notifier+0x0/0x10 returned 0 after 0 usecs [ 0.041987] calling swap_init_sysfs+0x0/0x84 @ 1 [ 0.042002] initcall swap_init_sysfs+0x0/0x84 returned 0 after 0 usecs [ 0.042013] calling swapfile_init+0x0/0xd0 @ 1 [ 0.042023] initcall swapfile_init+0x0/0xd0 returned 0 after 0 usecs [ 0.042033] calling hugetlb_init+0x0/0x4bc @ 1 [ 0.042046] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.042055] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.042064] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.042072] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.042164] initcall hugetlb_init+0x0/0x4bc returned 0 after 0 usecs [ 0.042177] calling ksm_init+0x0/0x198 @ 1 [ 0.042261] initcall ksm_init+0x0/0x198 returned 0 after 0 usecs [ 0.042275] calling hugepage_init+0x0/0x168 @ 1 [ 0.042364] initcall hugepage_init+0x0/0x168 returned 0 after 0 usecs [ 0.042378] calling mem_cgroup_init+0x0/0x178 @ 1 [ 0.042390] initcall mem_cgroup_init+0x0/0x178 returned 0 after 0 usecs [ 0.042400] calling io_wq_init+0x0/0x54 @ 1 [ 0.042411] initcall io_wq_init+0x0/0x54 returned 0 after 0 usecs [ 0.042422] calling echainiv_module_init+0x0/0x2c @ 1 [ 0.042432] initcall echainiv_module_init+0x0/0x2c returned 0 after 0 usecs [ 0.042442] calling rsa_init+0x0/0x68 @ 1 [ 0.042515] initcall rsa_init+0x0/0x68 returned 0 after 0 usecs [ 0.042529] calling hmac_module_init+0x0/0x2c @ 1 [ 0.042539] initcall hmac_module_init+0x0/0x2c returned 0 after 0 usecs [ 0.042549] calling crypto_null_mod_init+0x0/0x90 @ 1 [ 0.042765] initcall crypto_null_mod_init+0x0/0x90 returned 0 after 0 usecs [ 0.042780] calling md5_mod_init+0x0/0x2c @ 1 [ 0.042836] initcall md5_mod_init+0x0/0x2c returned 0 after 0 usecs [ 0.042851] calling sha1_generic_mod_init+0x0/0x2c @ 1 [ 0.042906] initcall sha1_generic_mod_init+0x0/0x2c returned 0 after 0 usecs [ 0.042921] calling sha256_generic_mod_init+0x0/0x30 @ 1 [ 0.043023] initcall sha256_generic_mod_init+0x0/0x30 returned 0 after 0 usecs [ 0.043038] calling crypto_ecb_module_init+0x0/0x2c @ 1 [ 0.043048] initcall crypto_ecb_module_init+0x0/0x2c returned 0 after 0 usecs [ 0.043058] calling crypto_cbc_module_init+0x0/0x2c @ 1 [ 0.043068] initcall crypto_cbc_module_init+0x0/0x2c returned 0 after 0 usecs [ 0.043078] calling cryptd_init+0x0/0x138 @ 1 [ 0.043132] cryptd: max_cpu_qlen set to 1000 [ 0.043142] initcall cryptd_init+0x0/0x138 returned 0 after 0 usecs [ 0.043154] calling aes_init+0x0/0x2c @ 1 [ 0.043216] initcall aes_init+0x0/0x2c returned 0 after 0 usecs [ 0.043229] calling deflate_mod_init+0x0/0x60 @ 1 [ 0.043385] initcall deflate_mod_init+0x0/0x60 returned 0 after 0 usecs [ 0.043399] calling crc32c_mod_init+0x0/0x2c @ 1 [ 0.043454] initcall crc32c_mod_init+0x0/0x2c returned 0 after 0 usecs [ 0.043468] calling crct10dif_mod_init+0x0/0x2c @ 1 [ 0.043522] initcall crct10dif_mod_init+0x0/0x2c returned 0 after 0 usecs [ 0.043536] calling prng_mod_init+0x0/0x30 @ 1 [ 0.043589] initcall prng_mod_init+0x0/0x30 returned 0 after 0 usecs [ 0.043603] calling drbg_init+0x0/0xfc @ 1 [ 0.044048] initcall drbg_init+0x0/0xfc returned 0 after 3906 usecs [ 0.044064] calling init_bio+0x0/0xfc @ 1 [ 0.044154] initcall init_bio+0x0/0xfc returned 0 after 0 usecs [ 0.044168] calling blk_settings_init+0x0/0x40 @ 1 [ 0.044178] initcall blk_settings_init+0x0/0x40 returned 0 after 0 usecs [ 0.044188] calling blk_ioc_init+0x0/0x48 @ 1 [ 0.044198] initcall blk_ioc_init+0x0/0x48 returned 0 after 0 usecs [ 0.044208] calling blk_mq_init+0x0/0x104 @ 1 [ 0.044219] initcall blk_mq_init+0x0/0x104 returned 0 after 0 usecs [ 0.044229] calling genhd_device_init+0x0/0x8c @ 1 [ 0.044339] initcall genhd_device_init+0x0/0x8c returned 0 after 0 usecs [ 0.044354] calling blkcg_init+0x0/0x4c @ 1 [ 0.044443] initcall blkcg_init+0x0/0x4c returned 0 after 0 usecs [ 0.044457] calling irq_poll_setup+0x0/0xb0 @ 1 [ 0.044468] initcall irq_poll_setup+0x0/0xb0 returned 0 after 0 usecs [ 0.044478] calling gpiolib_debugfs_init+0x0/0x48 @ 1 [ 0.044497] initcall gpiolib_debugfs_init+0x0/0x48 returned 0 after 0 usecs [ 0.044509] calling max732x_init+0x0/0x30 @ 1 [ 0.044534] initcall max732x_init+0x0/0x30 returned 0 after 0 usecs [ 0.044546] calling pca953x_init+0x0/0x30 @ 1 [ 0.044566] initcall pca953x_init+0x0/0x30 returned 0 after 0 usecs [ 0.044578] calling pwm_debugfs_init+0x0/0x44 @ 1 [ 0.044592] initcall pwm_debugfs_init+0x0/0x44 returned 0 after 0 usecs [ 0.044604] calling pwm_sysfs_init+0x0/0x34 @ 1 [ 0.044621] initcall pwm_sysfs_init+0x0/0x34 returned 0 after 0 usecs [ 0.044634] calling pci_slot_init+0x0/0x68 @ 1 [ 0.044648] initcall pci_slot_init+0x0/0x68 returned 0 after 0 usecs [ 0.044659] calling xgene_pcie_msi_init+0x0/0x30 @ 1 [ 0.044759] initcall xgene_pcie_msi_init+0x0/0x30 returned 0 after 0 usecs [ 0.044769] calling altera_msi_init+0x0/0x30 @ 1 [ 0.044816] initcall altera_msi_init+0x0/0x30 returned 0 after 0 usecs [ 0.044827] calling fbmem_init+0x0/0x108 @ 1 [ 0.044874] initcall fbmem_init+0x0/0x108 returned 0 after 0 usecs [ 0.044884] calling scan_for_dmi_ipmi+0x0/0x288 @ 1 [ 0.044894] initcall scan_for_dmi_ipmi+0x0/0x288 returned 0 after 0 usecs [ 0.044904] calling acpi_init+0x0/0x328 @ 1 [ 0.044913] ACPI: Interpreter disabled. [ 0.044919] initcall acpi_init+0x0/0x328 returned -19 after 0 usecs [ 0.044929] calling pnp_init+0x0/0x2c @ 1 [ 0.044953] initcall pnp_init+0x0/0x2c returned 0 after 0 usecs [ 0.044965] calling fsl_edma_init+0x0/0x30 @ 1 [ 0.045063] initcall fsl_edma_init+0x0/0x30 returned 0 after 0 usecs [ 0.045077] calling balloon_init+0x0/0xec @ 1 [ 0.045087] initcall balloon_init+0x0/0xec returned -19 after 0 usecs [ 0.045099] calling xen_setup_shutdown_event+0x0/0x58 @ 1 [ 0.045111] initcall xen_setup_shutdown_event+0x0/0x58 returned -19 after 0 usecs [ 0.045123] calling xenbus_probe_backend_init+0x0/0x64 @ 1 [ 0.045148] initcall xenbus_probe_backend_init+0x0/0x64 returned 0 after 0 usecs [ 0.045159] calling xenbus_probe_frontend_init+0x0/0x4c @ 1 [ 0.045180] initcall xenbus_probe_frontend_init+0x0/0x4c returned 0 after 0 usecs [ 0.045191] calling regulator_fixed_voltage_init+0x0/0x30 @ 1 [ 0.045247] initcall regulator_fixed_voltage_init+0x0/0x30 returned 0 after 0 usecs [ 0.045259] calling gpio_regulator_init+0x0/0x30 @ 1 [ 0.045303] initcall gpio_regulator_init+0x0/0x30 returned 0 after 0 usecs [ 0.045313] calling max8973_init+0x0/0x30 @ 1 [ 0.045330] initcall max8973_init+0x0/0x30 returned 0 after 0 usecs [ 0.045340] calling misc_init+0x0/0xec @ 1 [ 0.045358] initcall misc_init+0x0/0xec returned 0 after 0 usecs [ 0.045368] calling tpm_init+0x0/0x128 @ 1 [ 0.045448] initcall tpm_init+0x0/0x128 returned 0 after 0 usecs [ 0.045461] calling iommu_subsys_init+0x0/0x88 @ 1 [ 0.045471] iommu: Default domain type: Translated [ 0.045478] initcall iommu_subsys_init+0x0/0x88 returned 0 after 0 usecs [ 0.045488] calling vga_arb_device_init+0x0/0x1c8 @ 1 [ 0.045565] vgaarb: loaded [ 0.045572] initcall vga_arb_device_init+0x0/0x1c8 returned 0 after 0 usecs [ 0.045583] calling register_cpu_capacity_sysctl+0x0/0xa8 @ 1 [ 0.045603] initcall register_cpu_capacity_sysctl+0x0/0xa8 returned 0 after 0 usecs [ 0.045616] calling sec_pmic_init+0x0/0x30 @ 1 [ 0.045636] initcall sec_pmic_init+0x0/0x30 returned 0 after 0 usecs [ 0.045647] calling bd718xx_i2c_init+0x0/0x30 @ 1 [ 0.045666] initcall bd718xx_i2c_init+0x0/0x30 returned 0 after 0 usecs [ 0.045677] calling dma_buf_init+0x0/0xc8 @ 1 [ 0.045726] initcall dma_buf_init+0x0/0xc8 returned 0 after 0 usecs [ 0.045739] calling init_scsi+0x0/0x94 @ 1 [ 0.045843] SCSI subsystem initialized [ 0.045850] initcall init_scsi+0x0/0x94 returned 0 after 0 usecs [ 0.045862] calling ata_init+0x0/0x360 @ 1 [ 0.045955] libata version 3.00 loaded. [ 0.045964] initcall ata_init+0x0/0x360 returned 0 after 0 usecs [ 0.045977] calling pl022_init+0x0/0x2c @ 1 [ 0.046000] initcall pl022_init+0x0/0x2c returned 0 after 0 usecs [ 0.046011] calling phy_init+0x0/0x470 @ 1 [ 0.046056] initcall phy_init+0x0/0x470 returned 0 after 0 usecs [ 0.046068] calling hnae_init+0x0/0x50 @ 1 [ 0.046084] initcall hnae_init+0x0/0x50 returned 0 after 0 usecs [ 0.046095] calling usb_common_init+0x0/0x3c @ 1 [ 0.046111] initcall usb_common_init+0x0/0x3c returned 0 after 0 usecs [ 0.046123] calling ulpi_init+0x0/0x2c @ 1 [ 0.046144] initcall ulpi_init+0x0/0x2c returned 0 after 0 usecs [ 0.046156] calling usb_init+0x0/0x160 @ 1 [ 0.046217] usbcore: registered new interface driver usbfs [ 0.046242] usbcore: registered new interface driver hub [ 0.046263] usbcore: registered new device driver usb [ 0.046270] initcall usb_init+0x0/0x160 returned 0 after 0 usecs [ 0.046282] calling usb_phy_generic_init+0x0/0x30 @ 1 [ 0.046353] initcall usb_phy_generic_init+0x0/0x30 returned 0 after 0 usecs [ 0.046366] calling usb_udc_init+0x0/0x74 @ 1 [ 0.046382] initcall usb_udc_init+0x0/0x74 returned 0 after 0 usecs [ 0.046392] calling typec_init+0x0/0xb0 @ 1 [ 0.046418] initcall typec_init+0x0/0xb0 returned 0 after 0 usecs [ 0.046429] calling usb_roles_init+0x0/0x50 @ 1 [ 0.046442] initcall usb_roles_init+0x0/0x50 returned 0 after 0 usecs [ 0.046452] calling serio_init+0x0/0x54 @ 1 [ 0.046472] initcall serio_init+0x0/0x54 returned 0 after 0 usecs [ 0.046482] calling input_init+0x0/0x130 @ 1 [ 0.046502] initcall input_init+0x0/0x130 returned 0 after 0 usecs [ 0.046512] calling rtc_init+0x0/0x74 @ 1 [ 0.046526] initcall rtc_init+0x0/0x74 returned 0 after 0 usecs [ 0.046536] calling dw_i2c_init_driver+0x0/0x30 @ 1 [ 0.046593] initcall dw_i2c_init_driver+0x0/0x30 returned 0 after 0 usecs [ 0.046604] calling i2c_adap_imx_init+0x0/0x30 @ 1 [ 0.046726] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported [ 0.046925] i2c 0-004a: Linked as a sync state only consumer to 2310000.gpio [ 0.047013] i2c i2c-0: IMX I2C adapter registered [ 0.047173] imx-i2c 2030000.i2c: can't get pinctrl, bus recovery not supported [ 0.047279] i2c i2c-1: IMX I2C adapter registered [ 0.047380] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported [ 0.047489] i2c i2c-2: IMX I2C adapter registered [ 0.047565] initcall i2c_adap_imx_init+0x0/0x30 returned 0 after 0 usecs [ 0.047579] calling media_devnode_init+0x0/0xa0 @ 1 [ 0.047589] mc: Linux media interface: v0.10 [ 0.047609] initcall media_devnode_init+0x0/0xa0 returned 0 after 0 usecs [ 0.047621] calling videodev_init+0x0/0xa8 @ 1 [ 0.047630] videodev: Linux video capture interface: v2.00 [ 0.047643] initcall videodev_init+0x0/0xa8 returned 0 after 0 usecs [ 0.047653] calling init_dvbdev+0x0/0x100 @ 1 [ 0.047669] initcall init_dvbdev+0x0/0x100 returned 0 after 0 usecs [ 0.047679] calling pps_init+0x0/0xdc @ 1 [ 0.047696] pps_core: LinuxPPS API ver. 1 registered [ 0.047703] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.047713] initcall pps_init+0x0/0xdc returned 0 after 0 usecs [ 0.047722] calling ptp_init+0x0/0xc0 @ 1 [ 0.047736] PTP clock support registered [ 0.047742] initcall ptp_init+0x0/0xc0 returned 0 after 0 usecs [ 0.047752] calling brcmstb_reboot_init+0x0/0x38 @ 1 [ 0.047812] initcall brcmstb_reboot_init+0x0/0x38 returned -19 after 0 usecs [ 0.047823] calling power_supply_class_init+0x0/0x6c @ 1 [ 0.047846] initcall power_supply_class_init+0x0/0x6c returned 0 after 0 usecs [ 0.047858] calling hwmon_init+0x0/0x58 @ 1 [ 0.047872] initcall hwmon_init+0x0/0x58 returned 0 after 0 usecs [ 0.047883] calling edac_init+0x0/0x98 @ 1 [ 0.047892] EDAC MC: Ver: 3.0.0 [ 0.048015] initcall edac_init+0x0/0x98 returned 0 after 0 usecs [ 0.048028] calling psci_idle_init_domains+0x0/0x30 @ 1 [ 0.048104] initcall psci_idle_init_domains+0x0/0x30 returned 0 after 3906 usecs [ 0.048118] calling mmc_init+0x0/0x58 @ 1 [ 0.048157] initcall mmc_init+0x0/0x58 returned 0 after 0 usecs [ 0.048168] calling leds_init+0x0/0x78 @ 1 [ 0.048183] initcall leds_init+0x0/0x78 returned 0 after 0 usecs [ 0.048193] calling dmi_init+0x0/0x124 @ 1 [ 0.048203] initcall dmi_init+0x0/0x124 returned 0 after 0 usecs [ 0.048213] calling efisubsys_init+0x0/0x4f4 @ 1 [ 0.048223] initcall efisubsys_init+0x0/0x4f4 returned 0 after 0 usecs [ 0.048234] calling register_gop_device+0x0/0xac @ 1 [ 0.048244] initcall register_gop_device+0x0/0xac returned 0 after 0 usecs [ 0.048255] calling remoteproc_init+0x0/0x4c @ 1 [ 0.048282] initcall remoteproc_init+0x0/0x4c returned 0 after 0 usecs [ 0.048293] calling glink_rpm_init+0x0/0x30 @ 1 [ 0.048339] initcall glink_rpm_init+0x0/0x30 returned 0 after 0 usecs [ 0.048350] calling devfreq_init+0x0/0x10c @ 1 [ 0.048439] initcall devfreq_init+0x0/0x10c returned 0 after 0 usecs [ 0.048453] calling devfreq_event_init+0x0/0x80 @ 1 [ 0.048470] initcall devfreq_event_init+0x0/0x80 returned 0 after 0 usecs [ 0.048481] calling devfreq_simple_ondemand_init+0x0/0x2c @ 1 [ 0.048491] initcall devfreq_simple_ondemand_init+0x0/0x2c returned 0 after 0 usecs [ 0.048503] calling iio_init+0x0/0xb4 @ 1 [ 0.048530] initcall iio_init+0x0/0xb4 returned 0 after 0 usecs [ 0.048541] calling arm_pmu_hp_init+0x0/0x70 @ 1 [ 0.048553] initcall arm_pmu_hp_init+0x0/0x70 returned 0 after 0 usecs [ 0.048563] calling arm_pmu_acpi_init+0x0/0x1f0 @ 1 [ 0.048573] initcall arm_pmu_acpi_init+0x0/0x1f0 returned 0 after 0 usecs [ 0.048583] calling ras_init+0x0/0x28 @ 1 [ 0.048598] initcall ras_init+0x0/0x28 returned 0 after 0 usecs [ 0.048609] calling nvmem_init+0x0/0x30 @ 1 [ 0.048628] initcall nvmem_init+0x0/0x30 returned 0 after 0 usecs [ 0.048639] calling fpga_mgr_class_init+0x0/0x88 @ 1 [ 0.048648] FPGA manager framework [ 0.048659] initcall fpga_mgr_class_init+0x0/0x88 returned 0 after 0 usecs [ 0.048670] calling tee_init+0x0/0xf4 @ 1 [ 0.048693] initcall tee_init+0x0/0xf4 returned 0 after 0 usecs [ 0.048703] calling init_soundcore+0x0/0x6c @ 1 [ 0.048718] initcall init_soundcore+0x0/0x6c returned 0 after 0 usecs [ 0.048728] calling alsa_sound_init+0x0/0xc8 @ 1 [ 0.048749] Advanced Linux Sound Architecture Driver Initialized. [ 0.048756] initcall alsa_sound_init+0x0/0xc8 returned 0 after 0 usecs [ 0.048766] calling proto_init+0x0/0x2c @ 1 [ 0.048778] initcall proto_init+0x0/0x2c returned 0 after 0 usecs [ 0.048788] calling net_dev_init+0x0/0x210 @ 1 [ 0.048969] initcall net_dev_init+0x0/0x210 returned 0 after 0 usecs [ 0.048983] calling neigh_init+0x0/0xb4 @ 1 [ 0.048994] initcall neigh_init+0x0/0xb4 returned 0 after 0 usecs [ 0.049004] calling fib_notifier_init+0x0/0x2c @ 1 [ 0.049016] initcall fib_notifier_init+0x0/0x2c returned 0 after 0 usecs [ 0.049027] calling devlink_init+0x0/0x48 @ 1 [ 0.049085] initcall devlink_init+0x0/0x48 returned 0 after 0 usecs [ 0.049097] calling ethnl_init+0x0/0x84 @ 1 [ 0.049126] initcall ethnl_init+0x0/0x84 returned 0 after 0 usecs [ 0.049137] calling nexthop_init+0x0/0x104 @ 1 [ 0.049152] initcall nexthop_init+0x0/0x104 returned 0 after 0 usecs [ 0.049163] calling watchdog_init+0x0/0xa0 @ 1 [ 0.049246] initcall watchdog_init+0x0/0xa0 returned 0 after 0 usecs [ 0.049317] calling create_debug_debugfs_entry+0x0/0x40 @ 1 [ 0.049337] initcall create_debug_debugfs_entry+0x0/0x40 returned 0 after 0 usecs [ 0.049349] calling clocksource_done_booting+0x0/0x68 @ 1 [ 0.049381] clocksource: Switched to clocksource arch_sys_counter [ 0.049389] initcall clocksource_done_booting+0x0/0x68 returned 0 after 15 usecs [ 0.049402] calling tracer_init_tracefs+0x0/0x2d4 @ 1 [ 0.072028] initcall tracer_init_tracefs+0x0/0x2d4 returned 0 after 22082 usecs [ 0.072079] calling init_trace_printk_function_export+0x0/0x44 @ 1 [ 0.072099] initcall init_trace_printk_function_export+0x0/0x44 returned 0 after 5 usecs [ 0.072114] calling init_graph_tracefs+0x0/0x44 @ 1 [ 0.072129] initcall init_graph_tracefs+0x0/0x44 returned 0 after 3 usecs [ 0.072142] calling init_dynamic_event+0x0/0x54 @ 1 [ 0.072154] initcall init_dynamic_event+0x0/0x54 returned 0 after 3 usecs [ 0.072164] calling init_uprobe_trace+0x0/0x80 @ 1 [ 0.072179] initcall init_uprobe_trace+0x0/0x80 returned 0 after 6 usecs [ 0.072188] calling secretmem_init+0x0/0x40 @ 1 [ 0.072238] initcall secretmem_init+0x0/0x40 returned 0 after 38 usecs [ 0.072250] calling init_pipe_fs+0x0/0x68 @ 1 [ 0.072280] initcall init_pipe_fs+0x0/0x68 returned 0 after 18 usecs [ 0.072292] calling cgroup_writeback_init+0x0/0x4c @ 1 [ 0.072307] initcall cgroup_writeback_init+0x0/0x4c returned 0 after 4 usecs [ 0.072319] calling inotify_user_setup+0x0/0xd8 @ 1 [ 0.072343] initcall inotify_user_setup+0x0/0xd8 returned 0 after 13 usecs [ 0.072355] calling eventpoll_init+0x0/0xf4 @ 1 [ 0.072376] initcall eventpoll_init+0x0/0xf4 returned 0 after 11 usecs [ 0.072389] calling anon_inode_init+0x0/0x78 @ 1 [ 0.072420] initcall anon_inode_init+0x0/0x78 returned 0 after 20 usecs [ 0.072434] calling proc_locks_init+0x0/0x4c @ 1 [ 0.072450] initcall proc_locks_init+0x0/0x4c returned 0 after 5 usecs [ 0.072461] calling iomap_init+0x0/0x38 @ 1 [ 0.072495] initcall iomap_init+0x0/0x38 returned 0 after 23 usecs [ 0.072507] calling dquot_init+0x0/0x13c @ 1 [ 0.072517] VFS: Disk quotas dquot_6.6.0 [ 0.072552] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.072562] initcall dquot_init+0x0/0x13c returned 0 after 44 usecs [ 0.072575] calling proc_cmdline_init+0x0/0x44 @ 1 [ 0.072588] initcall proc_cmdline_init+0x0/0x44 returned 0 after 2 usecs [ 0.072600] calling proc_consoles_init+0x0/0x48 @ 1 [ 0.072612] initcall proc_consoles_init+0x0/0x48 returned 0 after 1 usecs [ 0.072623] calling proc_cpuinfo_init+0x0/0x40 @ 1 [ 0.072635] initcall proc_cpuinfo_init+0x0/0x40 returned 0 after 1 usecs [ 0.072647] calling proc_devices_init+0x0/0x48 @ 1 [ 0.072658] initcall proc_devices_init+0x0/0x48 returned 0 after 1 usecs [ 0.072670] calling proc_interrupts_init+0x0/0x48 @ 1 [ 0.072684] initcall proc_interrupts_init+0x0/0x48 returned 0 after 3 usecs [ 0.072696] calling proc_loadavg_init+0x0/0x44 @ 1 [ 0.072708] initcall proc_loadavg_init+0x0/0x44 returned 0 after 1 usecs [ 0.072719] calling proc_meminfo_init+0x0/0x44 @ 1 [ 0.072731] initcall proc_meminfo_init+0x0/0x44 returned 0 after 1 usecs [ 0.072742] calling proc_stat_init+0x0/0x40 @ 1 [ 0.072755] initcall proc_stat_init+0x0/0x40 returned 0 after 1 usecs [ 0.072766] calling proc_uptime_init+0x0/0x44 @ 1 [ 0.072777] initcall proc_uptime_init+0x0/0x44 returned 0 after 1 usecs [ 0.072789] calling proc_version_init+0x0/0x44 @ 1 [ 0.072800] initcall proc_version_init+0x0/0x44 returned 0 after 1 usecs [ 0.072812] calling proc_softirqs_init+0x0/0x44 @ 1 [ 0.072823] initcall proc_softirqs_init+0x0/0x44 returned 0 after 1 usecs [ 0.072835] calling vmcore_init+0x0/0x558 @ 1 [ 0.072846] initcall vmcore_init+0x0/0x558 returned 0 after 0 usecs [ 0.072857] calling proc_kmsg_init+0x0/0x40 @ 1 [ 0.072869] initcall proc_kmsg_init+0x0/0x40 returned 0 after 1 usecs [ 0.072880] calling proc_page_init+0x0/0x7c @ 1 [ 0.072894] initcall proc_page_init+0x0/0x7c returned 0 after 3 usecs [ 0.072905] calling proc_boot_config_init+0x0/0xb0 @ 1 [ 0.072918] initcall proc_boot_config_init+0x0/0xb0 returned 0 after 2 usecs [ 0.072930] calling init_ramfs_fs+0x0/0x2c @ 1 [ 0.072939] initcall init_ramfs_fs+0x0/0x2c returned 0 after 1 usecs [ 0.072949] calling init_hugetlbfs_fs+0x0/0x13c @ 1 [ 0.073028] initcall init_hugetlbfs_fs+0x0/0x13c returned 0 after 69 usecs [ 0.073040] calling blk_scsi_ioctl_init+0x0/0xb0 @ 1 [ 0.073051] initcall blk_scsi_ioctl_init+0x0/0xb0 returned 0 after 0 usecs [ 0.073061] calling acpi_event_init+0x0/0x54 @ 1 [ 0.073071] initcall acpi_event_init+0x0/0x54 returned 0 after 0 usecs [ 0.073081] calling pnp_system_init+0x0/0x2c @ 1 [ 0.073118] initcall pnp_system_init+0x0/0x2c returned 0 after 25 usecs [ 0.073130] calling pnpacpi_init+0x0/0x9c @ 1 [ 0.073140] pnp: PnP ACPI: disabled [ 0.073146] initcall pnpacpi_init+0x0/0x9c returned 0 after 5 usecs [ 0.073157] calling chr_dev_init+0x0/0x178 @ 1 [ 0.080545] initcall chr_dev_init+0x0/0x178 returned 0 after 7204 usecs [ 0.080567] calling firmware_class_init+0x0/0xe8 @ 1 [ 0.080590] initcall firmware_class_init+0x0/0xe8 returned 0 after 11 usecs [ 0.080602] calling sysctl_core_init+0x0/0x50 @ 1 [ 0.080639] initcall sysctl_core_init+0x0/0x50 returned 0 after 25 usecs [ 0.080650] calling eth_offload_init+0x0/0x30 @ 1 [ 0.080660] initcall eth_offload_init+0x0/0x30 returned 0 after 0 usecs [ 0.080670] calling ipv4_offload_init+0x0/0x90 @ 1 [ 0.080682] initcall ipv4_offload_init+0x0/0x90 returned 0 after 1 usecs [ 0.080693] calling inet_init+0x0/0x258 @ 1 [ 0.080735] NET: Registered protocol family 2 [ 0.081047] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.081075] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.081170] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.081516] TCP: Hash tables configured (established 32768 bind 32768) [ 0.081623] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.081653] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.081748] initcall inet_init+0x0/0x258 returned 0 after 1021 usecs [ 0.081769] calling af_unix_init+0x0/0x74 @ 1 [ 0.081787] NET: Registered protocol family 1 [ 0.081802] initcall af_unix_init+0x0/0x74 returned 0 after 21 usecs [ 0.081814] calling ipv6_offload_init+0x0/0x94 @ 1 [ 0.081828] initcall ipv6_offload_init+0x0/0x94 returned 0 after 2 usecs [ 0.081839] calling init_sunrpc+0x0/0x8c @ 1 [ 0.082114] RPC: Registered named UNIX socket transport module. [ 0.082126] RPC: Registered udp transport module. [ 0.082132] RPC: Registered tcp transport module. [ 0.082139] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.082146] initcall init_sunrpc+0x0/0x8c returned 0 after 289 usecs [ 0.082159] calling vlan_offload_init+0x0/0x44 @ 1 [ 0.082171] initcall vlan_offload_init+0x0/0x44 returned 0 after 0 usecs [ 0.082182] calling pci_apply_final_quirks+0x0/0x170 @ 1 [ 0.082195] PCI: CLS 0 bytes, default 64 [ 0.082202] initcall pci_apply_final_quirks+0x0/0x170 returned 0 after 9 usecs [ 0.082212] calling acpi_reserve_resources+0x0/0x104 @ 1 [ 0.082222] initcall acpi_reserve_resources+0x0/0x104 returned 0 after 0 usecs [ 0.082233] calling populate_rootfs+0x0/0x13c @ 1 [ 0.082338] initcall populate_rootfs+0x0/0x13c returned 0 after 91 usecs [ 0.082417] calling register_arm64_panic_block+0x0/0x38 @ 1 [ 0.082430] initcall register_arm64_panic_block+0x0/0x38 returned 0 after 1 usecs [ 0.082441] calling cpuinfo_regs_init+0x0/0xe0 @ 1 [ 0.082504] initcall cpuinfo_regs_init+0x0/0xe0 returned 0 after 51 usecs [ 0.082517] calling armv8_pmu_driver_init+0x0/0x68 @ 1 [ 0.082672] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.082848] initcall armv8_pmu_driver_init+0x0/0x68 returned 0 after 312 usecs [ 0.082864] calling arch_init_uprobes+0x0/0x44 @ 1 [ 0.082875] initcall arch_init_uprobes+0x0/0x44 returned 0 after 0 usecs [ 0.082887] calling arm_init+0x0/0x38 @ 1 [ 0.082904] kvm [1]: IPA Size Limit: 44 bits [ 0.083445] kvm [1]: GICv3: no GICV resource entry [ 0.083455] kvm [1]: disabling GICv2 emulation [ 0.083474] kvm [1]: GIC system register CPU interface enabled [ 0.083513] kvm [1]: vgic interrupt IRQ9 [ 0.083576] kvm [1]: Hyp mode initialized successfully [ 0.083724] initcall arm_init+0x0/0x38 returned 0 after 806 usecs [ 0.083739] calling cpu_feature_match_SHA1_init+0x0/0x4c @ 1 [ 0.083752] initcall cpu_feature_match_SHA1_init+0x0/0x4c returned -19 after 0 usecs [ 0.083765] calling cpu_feature_match_SHA2_init+0x0/0x50 @ 1 [ 0.083776] initcall cpu_feature_match_SHA2_init+0x0/0x50 returned -19 after 0 usecs [ 0.083789] calling ghash_ce_mod_init+0x0/0x60 @ 1 [ 0.083899] initcall ghash_ce_mod_init+0x0/0x60 returned 0 after 96 usecs [ 0.083913] calling cpu_feature_match_AES_init+0x0/0x4c @ 1 [ 0.083924] initcall cpu_feature_match_AES_init+0x0/0x4c returned -19 after 0 usecs [ 0.083937] calling aes_mod_init+0x0/0x44 @ 1 [ 0.083947] initcall aes_mod_init+0x0/0x44 returned -19 after 0 usecs [ 0.083958] calling cpu_feature_match_AES_init+0x0/0xd8 @ 1 [ 0.083969] initcall cpu_feature_match_AES_init+0x0/0xd8 returned -19 after 0 usecs [ 0.083982] calling sha256_mod_init+0x0/0x84 @ 1 [ 0.084218] initcall sha256_mod_init+0x0/0x84 returned 0 after 219 usecs [ 0.084234] calling aes_init+0x0/0x2c @ 1 [ 0.084293] initcall aes_init+0x0/0x2c returned 0 after 47 usecs [ 0.084308] calling proc_execdomains_init+0x0/0x44 @ 1 [ 0.084322] initcall proc_execdomains_init+0x0/0x44 returned 0 after 4 usecs [ 0.084331] calling register_warn_debugfs+0x0/0x44 @ 1 [ 0.084347] initcall register_warn_debugfs+0x0/0x44 returned 0 after 6 usecs [ 0.084358] calling cpuhp_sysfs_init+0x0/0xc8 @ 1 [ 0.084386] initcall cpuhp_sysfs_init+0x0/0xc8 returned 0 after 19 usecs [ 0.084396] calling ioresources_init+0x0/0x7c @ 1 [ 0.084409] initcall ioresources_init+0x0/0x7c returned 0 after 3 usecs [ 0.084418] calling snapshot_device_init+0x0/0x2c @ 1 [ 0.084492] initcall snapshot_device_init+0x0/0x2c returned 0 after 62 usecs [ 0.084505] calling irq_pm_init_ops+0x0/0x30 @ 1 [ 0.084515] initcall irq_pm_init_ops+0x0/0x30 returned 0 after 0 usecs [ 0.084525] calling irq_debugfs_init+0x0/0xa8 @ 1 [ 0.084970] initcall irq_debugfs_init+0x0/0xa8 returned 0 after 425 usecs [ 0.084983] calling timekeeping_init_ops+0x0/0x34 @ 1 [ 0.084994] initcall timekeeping_init_ops+0x0/0x34 returned 0 after 0 usecs [ 0.085005] calling init_clocksource_sysfs+0x0/0x48 @ 1 [ 0.085071] initcall init_clocksource_sysfs+0x0/0x48 returned 0 after 53 usecs [ 0.085085] calling init_timer_list_procfs+0x0/0x50 @ 1 [ 0.085098] initcall init_timer_list_procfs+0x0/0x50 returned 0 after 2 usecs [ 0.085109] calling alarmtimer_init+0x0/0xc8 @ 1 [ 0.085171] initcall alarmtimer_init+0x0/0xc8 returned 0 after 50 usecs [ 0.085183] calling init_posix_timers+0x0/0x48 @ 1 [ 0.085199] initcall init_posix_timers+0x0/0x48 returned 0 after 6 usecs [ 0.085210] calling clockevents_init_sysfs+0x0/0xfc @ 1 [ 0.085298] initcall clockevents_init_sysfs+0x0/0xfc returned 0 after 75 usecs [ 0.085312] calling sched_clock_syscore_init+0x0/0x34 @ 1 [ 0.085323] initcall sched_clock_syscore_init+0x0/0x34 returned 0 after 0 usecs [ 0.085335] calling proc_modules_init+0x0/0x44 @ 1 [ 0.085348] initcall proc_modules_init+0x0/0x44 returned 0 after 2 usecs [ 0.085359] calling kallsyms_init+0x0/0x40 @ 1 [ 0.085371] initcall kallsyms_init+0x0/0x40 returned 0 after 1 usecs [ 0.085408] calling pid_namespaces_init+0x0/0x48 @ 1 [ 0.085458] initcall pid_namespaces_init+0x0/0x48 returned 0 after 36 usecs [ 0.085472] calling ikconfig_init+0x0/0x64 @ 1 [ 0.085485] initcall ikconfig_init+0x0/0x64 returned 0 after 2 usecs [ 0.085497] calling audit_watch_init+0x0/0x54 @ 1 [ 0.085508] initcall audit_watch_init+0x0/0x54 returned 0 after 0 usecs [ 0.085520] calling audit_fsnotify_init+0x0/0x54 @ 1 [ 0.085533] initcall audit_fsnotify_init+0x0/0x54 returned 0 after 2 usecs [ 0.085545] calling audit_tree_init+0x0/0x9c @ 1 [ 0.085558] initcall audit_tree_init+0x0/0x9c returned 0 after 3 usecs [ 0.085570] calling seccomp_sysctl_init+0x0/0x44 @ 1 [ 0.085590] initcall seccomp_sysctl_init+0x0/0x44 returned 0 after 8 usecs [ 0.085602] calling utsname_sysctl_init+0x0/0x30 @ 1 [ 0.085621] initcall utsname_sysctl_init+0x0/0x30 returned 0 after 8 usecs [ 0.085633] calling init_tracepoints+0x0/0x50 @ 1 [ 0.085645] initcall init_tracepoints+0x0/0x50 returned 0 after 1 usecs [ 0.085657] calling perf_event_sysfs_init+0x0/0xb8 @ 1 [ 0.085807] initcall perf_event_sysfs_init+0x0/0xb8 returned 0 after 137 usecs [ 0.085819] calling system_trusted_keyring_init+0x0/0x78 @ 1 [ 0.085828] Initialise system trusted keyrings [ 0.085843] initcall system_trusted_keyring_init+0x0/0x78 returned 0 after 14 usecs [ 0.085854] calling kswapd_init+0x0/0x90 @ 1 [ 0.085926] initcall kswapd_init+0x0/0x90 returned 0 after 62 usecs [ 0.085938] calling extfrag_debug_init+0x0/0x80 @ 1 [ 0.085960] initcall extfrag_debug_init+0x0/0x80 returned 0 after 13 usecs [ 0.085970] calling mm_compute_batch_init+0x0/0x30 @ 1 [ 0.085980] initcall mm_compute_batch_init+0x0/0x30 returned 0 after 0 usecs [ 0.085989] calling slab_proc_init+0x0/0x44 @ 1 [ 0.086000] initcall slab_proc_init+0x0/0x44 returned 0 after 2 usecs [ 0.086010] calling workingset_init+0x0/0xc4 @ 1 [ 0.086019] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 0.086032] initcall workingset_init+0x0/0xc4 returned 0 after 12 usecs [ 0.086042] calling proc_vmalloc_init+0x0/0x50 @ 1 [ 0.086052] initcall proc_vmalloc_init+0x0/0x50 returned 0 after 1 usecs [ 0.086062] calling memblock_init_debugfs+0x0/0x90 @ 1 [ 0.086081] initcall memblock_init_debugfs+0x0/0x90 returned 0 after 9 usecs [ 0.086092] calling procswaps_init+0x0/0x44 @ 1 [ 0.086104] initcall procswaps_init+0x0/0x44 returned 0 after 2 usecs [ 0.086114] calling slab_sysfs_init+0x0/0x128 @ 1 [ 0.088769] initcall slab_sysfs_init+0x0/0x128 returned 0 after 2583 usecs [ 0.088786] calling fcntl_init+0x0/0x48 @ 1 [ 0.088801] initcall fcntl_init+0x0/0x48 returned 0 after 4 usecs [ 0.088812] calling proc_filesystems_init+0x0/0x44 @ 1 [ 0.088825] initcall proc_filesystems_init+0x0/0x44 returned 0 after 2 usecs [ 0.088836] calling start_dirtytime_writeback+0x0/0x4c @ 1 [ 0.088849] initcall start_dirtytime_writeback+0x0/0x4c returned 0 after 2 usecs [ 0.088862] calling blkdev_init+0x0/0x38 @ 1 [ 0.088884] initcall blkdev_init+0x0/0x38 returned 0 after 11 usecs [ 0.088896] calling dio_init+0x0/0x48 @ 1 [ 0.088950] initcall dio_init+0x0/0x48 returned 0 after 42 usecs [ 0.088963] calling dnotify_init+0x0/0x98 @ 1 [ 0.089018] initcall dnotify_init+0x0/0x98 returned 0 after 43 usecs [ 0.089031] calling fanotify_user_setup+0x0/0xb4 @ 1 [ 0.089089] initcall fanotify_user_setup+0x0/0xb4 returned 0 after 46 usecs [ 0.089103] calling aio_setup+0x0/0xa0 @ 1 [ 0.089187] initcall aio_setup+0x0/0xa0 returned 0 after 72 usecs [ 0.089201] calling io_uring_init+0x0/0x4c @ 1 [ 0.089215] initcall io_uring_init+0x0/0x4c returned 0 after 3 usecs [ 0.089226] calling mbcache_init+0x0/0x54 @ 1 [ 0.089277] initcall mbcache_init+0x0/0x54 returned 0 after 39 usecs [ 0.089291] calling init_grace+0x0/0x2c @ 1 [ 0.089304] initcall init_grace+0x0/0x2c returned 0 after 2 usecs [ 0.089315] calling init_devpts_fs+0x0/0x4c @ 1 [ 0.089340] initcall init_devpts_fs+0x0/0x4c returned 0 after 14 usecs [ 0.089352] calling ext4_init_fs+0x0/0x1a8 @ 1 [ 0.089699] initcall ext4_init_fs+0x0/0x1a8 returned 0 after 330 usecs [ 0.089712] calling init_ext2_fs+0x0/0x88 @ 1 [ 0.089754] initcall init_ext2_fs+0x0/0x88 returned 0 after 32 usecs [ 0.089765] calling journal_init+0x0/0x13c @ 1 [ 0.089859] initcall journal_init+0x0/0x13c returned 0 after 83 usecs [ 0.089871] calling init_squashfs_fs+0x0/0x94 @ 1 [ 0.089913] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.089920] initcall init_squashfs_fs+0x0/0x94 returned 0 after 40 usecs [ 0.089930] calling init_fat_fs+0x0/0x6c @ 1 [ 0.090002] initcall init_fat_fs+0x0/0x6c returned 0 after 61 usecs [ 0.090013] calling init_vfat_fs+0x0/0x2c @ 1 [ 0.090023] initcall init_vfat_fs+0x0/0x2c returned 0 after 1 usecs [ 0.090032] calling init_nfs_fs+0x0/0x168 @ 1 [ 0.090365] initcall init_nfs_fs+0x0/0x168 returned 0 after 317 usecs [ 0.090378] calling init_nfs_v2+0x0/0x30 @ 1 [ 0.090387] initcall init_nfs_v2+0x0/0x30 returned 0 after 0 usecs [ 0.090397] calling init_nfs_v3+0x0/0x30 @ 1 [ 0.090405] initcall init_nfs_v3+0x0/0x30 returned 0 after 0 usecs [ 0.090414] calling init_nfs_v4+0x0/0x6c @ 1 [ 0.090422] NFS: Registering the id_resolver key type [ 0.090440] Key type id_resolver registered [ 0.090447] Key type id_legacy registered [ 0.090500] initcall init_nfs_v4+0x0/0x6c returned 0 after 76 usecs [ 0.090512] calling nfs4filelayout_init+0x0/0x44 @ 1 [ 0.090520] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.090528] initcall nfs4filelayout_init+0x0/0x44 returned 0 after 7 usecs [ 0.090538] calling init_nlm+0x0/0x8c @ 1 [ 0.090556] initcall init_nlm+0x0/0x8c returned 0 after 9 usecs [ 0.090566] calling init_nls_cp437+0x0/0x30 @ 1 [ 0.090575] initcall init_nls_cp437+0x0/0x30 returned 0 after 0 usecs [ 0.090584] calling init_nls_iso8859_1+0x0/0x30 @ 1 [ 0.090593] initcall init_nls_iso8859_1+0x0/0x30 returned 0 after 0 usecs [ 0.090602] calling init_autofs_fs+0x0/0x48 @ 1 [ 0.090696] initcall init_autofs_fs+0x0/0x48 returned 0 after 83 usecs [ 0.090708] calling init_v9fs+0x0/0x10c @ 1 [ 0.090717] 9p: Installing v9fs 9p2000 file system support [ 0.090761] initcall init_v9fs+0x0/0x10c returned 0 after 43 usecs [ 0.090772] calling efivarfs_init+0x0/0x3c @ 1 [ 0.090782] initcall efivarfs_init+0x0/0x3c returned -19 after 0 usecs [ 0.090791] calling ipc_init+0x0/0x40 @ 1 [ 0.090810] initcall ipc_init+0x0/0x40 returned 0 after 10 usecs [ 0.090819] calling ipc_sysctl_init+0x0/0x30 @ 1 [ 0.090840] initcall ipc_sysctl_init+0x0/0x30 returned 0 after 11 usecs [ 0.090851] calling init_mqueue_fs+0x0/0x104 @ 1 [ 0.090935] initcall init_mqueue_fs+0x0/0x104 returned 0 after 73 usecs [ 0.090947] calling key_proc_init+0x0/0x94 @ 1 [ 0.090960] initcall key_proc_init+0x0/0x94 returned 0 after 3 usecs [ 0.090970] calling crypto_algapi_init+0x0/0x28 @ 1 [ 0.090981] initcall crypto_algapi_init+0x0/0x28 returned 0 after 1 usecs [ 0.090991] calling jent_mod_init+0x0/0x4c @ 1 [ 0.120799] initcall jent_mod_init+0x0/0x4c returned 0 after 29100 usecs [ 0.120814] calling asymmetric_key_init+0x0/0x2c @ 1 [ 0.120824] Key type asymmetric registered [ 0.120831] initcall asymmetric_key_init+0x0/0x2c returned 0 after 7 usecs [ 0.120841] calling x509_key_init+0x0/0x2c @ 1 [ 0.120851] Asymmetric key parser 'x509' registered [ 0.120857] initcall x509_key_init+0x0/0x2c returned 0 after 7 usecs [ 0.120867] calling proc_genhd_init+0x0/0x74 @ 1 [ 0.120881] initcall proc_genhd_init+0x0/0x74 returned 0 after 3 usecs [ 0.120891] calling bsg_init+0x0/0x134 @ 1 [ 0.120914] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.120923] initcall bsg_init+0x0/0x134 returned 0 after 22 usecs [ 0.120934] calling deadline_init+0x0/0x2c @ 1 [ 0.120944] io scheduler mq-deadline registered [ 0.120950] initcall deadline_init+0x0/0x2c returned 0 after 7 usecs [ 0.120960] calling kyber_init+0x0/0x2c @ 1 [ 0.120970] io scheduler kyber registered [ 0.120976] initcall kyber_init+0x0/0x2c returned 0 after 6 usecs [ 0.120986] calling crc_t10dif_mod_init+0x0/0x5c @ 1 [ 0.121007] initcall crc_t10dif_mod_init+0x0/0x5c returned 0 after 11 usecs [ 0.121018] calling percpu_counter_startup+0x0/0x74 @ 1 [ 0.121053] initcall percpu_counter_startup+0x0/0x74 returned 0 after 24 usecs [ 0.121073] calling audit_classes_init+0x0/0xb8 @ 1 [ 0.121092] initcall audit_classes_init+0x0/0xb8 returned 0 after 7 usecs [ 0.121104] calling sg_pool_init+0x0/0xf4 @ 1 [ 0.121202] initcall sg_pool_init+0x0/0xf4 returned 0 after 86 usecs [ 0.121216] calling ls_scfg_msi_driver_init+0x0/0x34 @ 1 [ 0.121362] initcall ls_scfg_msi_driver_init+0x0/0x34 returned 0 after 131 usecs [ 0.121388] calling sl28cpld_intc_driver_init+0x0/0x30 @ 1 [ 0.121439] initcall sl28cpld_intc_driver_init+0x0/0x30 returned 0 after 37 usecs [ 0.121453] calling brcm_gisb_driver_init+0x0/0x38 @ 1 [ 0.121533] initcall brcm_gisb_driver_init+0x0/0x38 returned -19 after 67 usecs [ 0.121547] calling simple_pm_bus_driver_init+0x0/0x30 @ 1 [ 0.121595] initcall simple_pm_bus_driver_init+0x0/0x30 returned 0 after 35 usecs [ 0.121609] calling vexpress_syscfg_driver_init+0x0/0x30 @ 1 [ 0.121643] initcall vexpress_syscfg_driver_init+0x0/0x30 returned 0 after 21 usecs [ 0.121656] calling phy_core_init+0x0/0x78 @ 1 [ 0.121673] initcall phy_core_init+0x0/0x78 returned 0 after 6 usecs [ 0.121685] calling xgene_phy_driver_init+0x0/0x30 @ 1 [ 0.121735] initcall xgene_phy_driver_init+0x0/0x30 returned 0 after 38 usecs [ 0.121749] calling imx8mq_usb_phy_driver_init+0x0/0x30 @ 1 [ 0.121805] initcall imx8mq_usb_phy_driver_init+0x0/0x30 returned 0 after 43 usecs [ 0.121819] calling qcom_usb_hs_phy_driver_init+0x0/0x30 @ 1 [ 0.121840] initcall qcom_usb_hs_phy_driver_init+0x0/0x30 returned 0 after 9 usecs [ 0.121853] calling samsung_usb2_phy_driver_init+0x0/0x30 @ 1 [ 0.121892] initcall samsung_usb2_phy_driver_init+0x0/0x30 returned 0 after 26 usecs [ 0.121905] calling max77620_pinctrl_driver_init+0x0/0x30 @ 1 [ 0.121939] initcall max77620_pinctrl_driver_init+0x0/0x30 returned 0 after 22 usecs [ 0.121953] calling pcs_driver_init+0x0/0x30 @ 1 [ 0.122028] initcall pcs_driver_init+0x0/0x30 returned 0 after 62 usecs [ 0.122041] calling bgpio_driver_init+0x0/0x30 @ 1 [ 0.122100] initcall bgpio_driver_init+0x0/0x30 returned 0 after 47 usecs [ 0.122113] calling dwapb_gpio_driver_init+0x0/0x30 @ 1 [ 0.122166] initcall dwapb_gpio_driver_init+0x0/0x30 returned 0 after 40 usecs [ 0.122180] calling max77620_gpio_driver_init+0x0/0x30 @ 1 [ 0.122215] initcall max77620_gpio_driver_init+0x0/0x30 returned 0 after 23 usecs [ 0.122229] calling mb86s70_gpio_driver_init+0x0/0x30 @ 1 [ 0.122277] initcall mb86s70_gpio_driver_init+0x0/0x30 returned 0 after 36 usecs [ 0.122291] calling pl061_gpio_driver_init+0x0/0x2c @ 1 [ 0.122315] initcall pl061_gpio_driver_init+0x0/0x2c returned 0 after 12 usecs [ 0.122329] calling sl28cpld_gpio_driver_init+0x0/0x30 @ 1 [ 0.122386] initcall sl28cpld_gpio_driver_init+0x0/0x30 returned 0 after 45 usecs [ 0.122400] calling xgene_gpio_driver_init+0x0/0x30 @ 1 [ 0.122446] initcall xgene_gpio_driver_init+0x0/0x30 returned 0 after 34 usecs [ 0.122460] calling sl28cpld_pwm_driver_init+0x0/0x30 @ 1 [ 0.122507] initcall sl28cpld_pwm_driver_init+0x0/0x30 returned 0 after 34 usecs [ 0.122520] calling pcie_portdrv_init+0x0/0x60 @ 1 [ 0.122580] initcall pcie_portdrv_init+0x0/0x60 returned 0 after 49 usecs [ 0.122590] calling aer_inject_init+0x0/0x30 @ 1 [ 0.122674] initcall aer_inject_init+0x0/0x30 returned 0 after 73 usecs [ 0.122686] calling pci_proc_init+0x0/0xa0 @ 1 [ 0.122701] initcall pci_proc_init+0x0/0xa0 returned 0 after 5 usecs [ 0.122710] calling pci_hotplug_init+0x0/0x18 @ 1 [ 0.122719] initcall pci_hotplug_init+0x0/0x18 returned 0 after 0 usecs [ 0.122728] calling gen_pci_driver_init+0x0/0x30 @ 1 [ 0.122815] pci-host-generic 1f0000000.pcie: host bridge /soc/pcie@1f0000000 ranges: [ 0.122852] pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x0000000000 [ 0.122879] pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x0000000000 [ 0.122903] pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x0000000000 [ 0.122924] pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x0000000000 [ 0.122944] pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x0000000000 [ 0.122964] pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x0000000000 [ 0.122980] pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x0000000000 [ 0.123037] pci-host-generic 1f0000000.pcie: ECAM at [mem 0x1f0000000-0x1f00fffff] for [bus 00] [ 0.123112] pci-host-generic 1f0000000.pcie: PCI host bridge to bus 0000:00 [ 0.123123] pci_bus 0000:00: root bus resource [bus 00] [ 0.123132] pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff] (bus address [0x00000000-0x0015ffff]) [ 0.123144] pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref] (bus address [0x00000000-0x0006ffff]) [ 0.123156] pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff] (bus address [0x00000000-0x0001ffff]) [ 0.123168] pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref] (bus address [0x00000000-0x0001ffff]) [ 0.123179] pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff] (bus address [0x00000000-0x0001ffff]) [ 0.123190] pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref] (bus address [0x00000000-0x0001ffff]) [ 0.123202] pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff] (bus address [0x00000000-0x003fffff]) [ 0.123229] pci 0000:00:00.0: [1957:e100] type 00 class 0x020001 [ 0.123266] pci 0000:00:00.0: BAR 0: [mem 0x1f8000000-0x1f803ffff 64bit] (from Enhanced Allocation, properties 0x0) [ 0.123280] pci 0000:00:00.0: BAR 2: [mem 0x1f8160000-0x1f816ffff 64bit pref] (from Enhanced Allocation, properties 0x1) [ 0.123294] pci 0000:00:00.0: VF BAR 0: [mem 0x1f81d0000-0x1f81dffff 64bit] (from Enhanced Allocation, properties 0x4) [ 0.123307] pci 0000:00:00.0: VF BAR 2: [mem 0x1f81f0000-0x1f81fffff 64bit pref] (from Enhanced Allocation, properties 0x3) [ 0.123335] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.123350] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x1f81d0000-0x1f81effff 64bit] (contains BAR0 for 2 VFs) [ 0.123363] pci 0000:00:00.0: VF(n) BAR2 space: [mem 0x1f81f0000-0x1f820ffff 64bit pref] (contains BAR2 for 2 VFs) [ 0.123502] pci 0000:00:00.1: [1957:e100] type 00 class 0x020001 [ 0.123537] pci 0000:00:00.1: BAR 0: [mem 0x1f8040000-0x1f807ffff 64bit] (from Enhanced Allocation, properties 0x0) [ 0.123551] pci 0000:00:00.1: BAR 2: [mem 0x1f8170000-0x1f817ffff 64bit pref] (from Enhanced Allocation, properties 0x1) [ 0.123564] pci 0000:00:00.1: VF BAR 0: [mem 0x1f8210000-0x1f821ffff 64bit] (from Enhanced Allocation, properties 0x4) [ 0.123577] pci 0000:00:00.1: VF BAR 2: [mem 0x1f8230000-0x1f823ffff 64bit pref] (from Enhanced Allocation, properties 0x3) [ 0.123603] pci 0000:00:00.1: PME# supported from D0 D3hot [ 0.123618] pci 0000:00:00.1: VF(n) BAR0 space: [mem 0x1f8210000-0x1f822ffff 64bit] (contains BAR0 for 2 VFs) [ 0.123630] pci 0000:00:00.1: VF(n) BAR2 space: [mem 0x1f8230000-0x1f824ffff 64bit pref] (contains BAR2 for 2 VFs) [ 0.123768] pci 0000:00:00.1: Linked as a sync state only consumer to 0000:00:00.1 [ 0.123794] pci 0000:00:00.2: [1957:e100] type 00 class 0x020001 [ 0.123825] pci 0000:00:00.2: BAR 0: [mem 0x1f8080000-0x1f80bffff 64bit] (from Enhanced Allocation, properties 0x0) [ 0.123838] pci 0000:00:00.2: BAR 2: [mem 0x1f8180000-0x1f818ffff 64bit pref] (from Enhanced Allocation, properties 0x1) [ 0.123863] pci 0000:00:00.2: PME# supported from D0 D3hot [ 0.123967] pci 0000:00:00.3: [1957:ee01] type 00 class 0x088001 [ 0.124001] pci 0000:00:00.3: BAR 0: [mem 0x1f8100000-0x1f811ffff 64bit] (from Enhanced Allocation, properties 0x0) [ 0.124014] pci 0000:00:00.3: BAR 2: [mem 0x1f8190000-0x1f819ffff 64bit pref] (from Enhanced Allocation, properties 0x1) [ 0.124039] pci 0000:00:00.3: PME# supported from D0 D3hot [ 0.124148] pci 0000:00:00.4: [1957:ee02] type 00 class 0x088001 [ 0.124178] pci 0000:00:00.4: BAR 0: [mem 0x1f8120000-0x1f813ffff 64bit] (from Enhanced Allocation, properties 0x0) [ 0.124192] pci 0000:00:00.4: BAR 2: [mem 0x1f81a0000-0x1f81affff 64bit pref] (from Enhanced Allocation, properties 0x1) [ 0.124216] pci 0000:00:00.4: PME# supported from D0 D3hot [ 0.124318] pci 0000:00:00.5: [1957:eef0] type 00 class 0x020801 [ 0.124349] pci 0000:00:00.5: BAR 0: [mem 0x1f8140000-0x1f815ffff 64bit] (from Enhanced Allocation, properties 0x0) [ 0.124362] pci 0000:00:00.5: BAR 2: [mem 0x1f81b0000-0x1f81bffff 64bit pref] (from Enhanced Allocation, properties 0x1) [ 0.124375] pci 0000:00:00.5: BAR 4: [mem 0x1fc000000-0x1fc3fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 0.124399] pci 0000:00:00.5: PME# supported from D0 D3hot [ 0.124512] pci 0000:00:00.6: [1957:e100] type 00 class 0x020001 [ 0.124542] pci 0000:00:00.6: BAR 0: [mem 0x1f80c0000-0x1f80fffff 64bit] (from Enhanced Allocation, properties 0x0) [ 0.124556] pci 0000:00:00.6: BAR 2: [mem 0x1f81c0000-0x1f81cffff 64bit pref] (from Enhanced Allocation, properties 0x1) [ 0.124580] pci 0000:00:00.6: PME# supported from D0 D3hot [ 0.125491] pci 0000:00:1f.0: [1957:e001] type 00 class 0x080700 [ 0.125544] OF: /soc/pcie@1f0000000: no msi-map translation for id 0xf8 on (null) [ 0.125670] pci 0000:00:00.0: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 0.125692] pci 0000:00:00.0: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 0.125714] pci 0000:00:00.1: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 0.125727] pci 0000:00:00.1: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 0.125744] pci 0000:00:00.2: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 0.125756] pci 0000:00:00.2: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 0.125772] pci 0000:00:00.3: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 0.125784] pci 0000:00:00.3: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 0.125800] pci 0000:00:00.4: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 0.125812] pci 0000:00:00.4: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 0.125828] pci 0000:00:00.5: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 0.125840] pci 0000:00:00.5: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 0.125855] pci 0000:00:00.6: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 0.125867] pci 0000:00:00.6: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 0.125883] pci 0000:00:1f.0: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 0.125895] pci 0000:00:1f.0: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 0.125919] OF: /soc/pcie@1f0000000: no iommu-map translation for id 0xf8 on (null) [ 0.126061] pcieport 0000:00:1f.0: PME: Signaling with IRQ 118 [ 0.126273] pcieport 0000:00:1f.0: AER: enabled with IRQ 118 [ 0.126409] initcall gen_pci_driver_init+0x0/0x30 returned 0 after 3585 usecs [ 0.126425] calling altera_pcie_driver_init+0x0/0x30 @ 1 [ 0.126502] initcall altera_pcie_driver_init+0x0/0x30 returned 0 after 65 usecs [ 0.126515] calling ls_pcie_driver_init+0x0/0x38 @ 1 [ 0.126644] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges: [ 0.126677] layerscape-pcie 3400000.pcie: IO 0x8000010000..0x800001ffff -> 0x0000000000 [ 0.126696] layerscape-pcie 3400000.pcie: MEM 0x8040000000..0x807fffffff -> 0x0040000000 [ 0.126747] layerscape-pcie 3400000.pcie: iATU unroll: disabled [ 0.126756] layerscape-pcie 3400000.pcie: Detected iATU regions: 8 outbound, 6 inbound [ 1.126858] layerscape-pcie 3400000.pcie: Phy link never came up [ 1.126956] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0001:00 [ 1.126968] pci_bus 0001:00: root bus resource [bus 00-ff] [ 1.126977] pci_bus 0001:00: root bus resource [io 0x0000-0xffff] [ 1.126987] pci_bus 0001:00: root bus resource [mem 0x8040000000-0x807fffffff] (bus address [0x40000000-0x7fffffff]) [ 1.127017] pci 0001:00:00.0: [1957:82c1] type 01 class 0x060400 [ 1.127083] pci 0001:00:00.0: supports D1 D2 [ 1.127091] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot [ 1.128778] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.128798] pci 0001:00:00.0: PCI bridge to [bus 01] [ 1.128814] pci 0001:00:00.0: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 1.128835] pci 0001:00:00.0: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 1.128993] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges: [ 1.129025] layerscape-pcie 3500000.pcie: IO 0x8800010000..0x880001ffff -> 0x0000000000 [ 1.129045] layerscape-pcie 3500000.pcie: MEM 0x8840000000..0x887fffffff -> 0x0040000000 [ 1.129093] layerscape-pcie 3500000.pcie: iATU unroll: disabled [ 1.129102] layerscape-pcie 3500000.pcie: Detected iATU regions: 8 outbound, 6 inbound [ 2.129206] layerscape-pcie 3500000.pcie: Phy link never came up [ 2.129275] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0002:00 [ 2.129286] pci_bus 0002:00: root bus resource [bus 00-ff] [ 2.129295] pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 2.129307] pci_bus 0002:00: root bus resource [mem 0x8840000000-0x887fffffff] (bus address [0x40000000-0x7fffffff]) [ 2.129332] pci 0002:00:00.0: [1957:82c1] type 01 class 0x060400 [ 2.129409] pci 0002:00:00.0: supports D1 D2 [ 2.129418] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot [ 2.131066] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.131083] pci 0002:00:00.0: PCI bridge to [bus 01] [ 2.131097] pci 0002:00:00.0: calling quirk_fsl_no_msi+0x0/0x30 @ 1 [ 2.131112] pci 0002:00:00.0: quirk_fsl_no_msi+0x0/0x30 took 0 usecs [ 2.131227] initcall ls_pcie_driver_init+0x0/0x38 returned 0 after 1957718 usecs [ 2.131245] calling kirin_pcie_driver_init+0x0/0x34 @ 1 [ 2.131310] initcall kirin_pcie_driver_init+0x0/0x34 returned 0 after 54 usecs [ 2.131322] calling hisi_pcie_almost_ecam_driver_init+0x0/0x30 @ 1 [ 2.131374] initcall hisi_pcie_almost_ecam_driver_init+0x0/0x30 returned 0 after 41 usecs [ 2.131387] calling thunder_ecam_driver_init+0x0/0x30 @ 1 [ 2.131431] initcall thunder_ecam_driver_init+0x0/0x30 returned 0 after 34 usecs [ 2.131442] calling thunder_pem_driver_init+0x0/0x30 @ 1 [ 2.131487] initcall thunder_pem_driver_init+0x0/0x30 returned 0 after 34 usecs [ 2.131499] calling xgene_pcie_driver_init+0x0/0x30 @ 1 [ 2.131546] initcall xgene_pcie_driver_init+0x0/0x30 returned 0 after 37 usecs [ 2.131558] calling xenfb_init+0x0/0x5c @ 1 [ 2.131567] initcall xenfb_init+0x0/0x5c returned -19 after 0 usecs [ 2.131576] calling efifb_driver_init+0x0/0x30 @ 1 [ 2.131607] initcall efifb_driver_init+0x0/0x30 returned 0 after 21 usecs [ 2.131617] calling ged_driver_init+0x0/0x30 @ 1 [ 2.131649] initcall ged_driver_init+0x0/0x30 returned 0 after 21 usecs [ 2.131660] calling acpi_ac_init+0x0/0xd0 @ 1 [ 2.131670] initcall acpi_ac_init+0x0/0xd0 returned -19 after 0 usecs [ 2.131681] calling acpi_button_driver_init+0x0/0x84 @ 1 [ 2.131691] initcall acpi_button_driver_init+0x0/0x84 returned 0 after 0 usecs [ 2.131702] calling acpi_fan_driver_init+0x0/0x30 @ 1 [ 2.131737] initcall acpi_fan_driver_init+0x0/0x30 returned 0 after 24 usecs [ 2.131749] calling acpi_processor_driver_init+0x0/0xec @ 1 [ 2.131759] initcall acpi_processor_driver_init+0x0/0xec returned 0 after 0 usecs [ 2.131770] calling acpi_thermal_init+0x0/0x9c @ 1 [ 2.131889] initcall acpi_thermal_init+0x0/0x9c returned -19 after 106 usecs [ 2.131907] calling acpi_battery_init+0x0/0x5c @ 1 [ 2.131919] initcall acpi_battery_init+0x0/0x5c returned -19 after 0 usecs [ 2.131931] calling acpi_hed_driver_init+0x0/0x30 @ 1 [ 2.131941] initcall acpi_hed_driver_init+0x0/0x30 returned -19 after 0 usecs [ 2.131953] calling erst_init+0x0/0x2fc @ 1 [ 2.131963] initcall erst_init+0x0/0x2fc returned 0 after 0 usecs [ 2.131973] calling ghes_init+0x0/0x118 @ 1 [ 2.131983] initcall ghes_init+0x0/0x118 returned -19 after 0 usecs [ 2.131993] calling einj_init+0x0/0x4a8 @ 1 [ 2.132003] EINJ: ACPI disabled. [ 2.132009] initcall einj_init+0x0/0x4a8 returned -19 after 5 usecs [ 2.132020] calling gtdt_sbsa_gwdt_init+0x0/0x120 @ 1 [ 2.132030] initcall gtdt_sbsa_gwdt_init+0x0/0x120 returned 0 after 0 usecs [ 2.132041] calling of_fixed_factor_clk_driver_init+0x0/0x30 @ 1 [ 2.132104] initcall of_fixed_factor_clk_driver_init+0x0/0x30 returned 0 after 49 usecs [ 2.132118] calling of_fixed_clk_driver_init+0x0/0x30 @ 1 [ 2.132167] initcall of_fixed_clk_driver_init+0x0/0x30 returned 0 after 36 usecs [ 2.132181] calling gpio_clk_driver_init+0x0/0x30 @ 1 [ 2.132236] initcall gpio_clk_driver_init+0x0/0x30 returned 0 after 43 usecs [ 2.132249] calling cs2000_driver_init+0x0/0x30 @ 1 [ 2.132283] initcall cs2000_driver_init+0x0/0x30 returned 0 after 22 usecs [ 2.132295] calling fsl_flexspi_clk_driver_init+0x0/0x30 @ 1 [ 2.132434] initcall fsl_flexspi_clk_driver_init+0x0/0x30 returned 0 after 124 usecs [ 2.132450] calling fsl_sai_clk_driver_init+0x0/0x30 @ 1 [ 2.132501] initcall fsl_sai_clk_driver_init+0x0/0x30 returned 0 after 38 usecs [ 2.132515] calling plldig_clk_driver_init+0x0/0x30 @ 1 [ 2.132617] initcall plldig_clk_driver_init+0x0/0x30 returned 0 after 89 usecs [ 2.132633] calling clk_pwm_driver_init+0x0/0x30 @ 1 [ 2.132681] initcall clk_pwm_driver_init+0x0/0x30 returned 0 after 36 usecs [ 2.132694] calling clockgen_cpufreq_init+0x0/0xac @ 1 [ 2.132760] initcall clockgen_cpufreq_init+0x0/0xac returned 0 after 54 usecs [ 2.132774] calling rk808_clkout_driver_init+0x0/0x30 @ 1 [ 2.132809] initcall rk808_clkout_driver_init+0x0/0x30 returned 0 after 23 usecs [ 2.132823] calling s2mps11_clk_driver_init+0x0/0x30 @ 1 [ 2.132863] initcall s2mps11_clk_driver_init+0x0/0x30 returned 0 after 27 usecs [ 2.132877] calling scpi_clocks_driver_init+0x0/0x30 @ 1 [ 2.132925] initcall scpi_clocks_driver_init+0x0/0x30 returned 0 after 36 usecs [ 2.132938] calling mv_xor_v2_driver_init+0x0/0x30 @ 1 [ 2.132985] initcall mv_xor_v2_driver_init+0x0/0x30 returned 0 after 35 usecs [ 2.132998] calling pl330_driver_init+0x0/0x2c @ 1 [ 2.133023] initcall pl330_driver_init+0x0/0x2c returned 0 after 13 usecs [ 2.133036] calling hidma_mgmt_init+0x0/0x1f0 @ 1 [ 2.133127] initcall hidma_mgmt_init+0x0/0x1f0 returned 0 after 78 usecs [ 2.133140] calling hidma_driver_init+0x0/0x30 @ 1 [ 2.133199] initcall hidma_driver_init+0x0/0x30 returned 0 after 47 usecs [ 2.133212] calling dpaa2_console_driver_init+0x0/0x30 @ 1 [ 2.133262] initcall dpaa2_console_driver_init+0x0/0x30 returned 0 after 37 usecs [ 2.133275] calling virtio_mmio_init+0x0/0x30 @ 1 [ 2.133323] initcall virtio_mmio_init+0x0/0x30 returned 0 after 36 usecs [ 2.133336] calling virtio_pci_driver_init+0x0/0x38 @ 1 [ 2.133422] initcall virtio_pci_driver_init+0x0/0x38 returned 0 after 73 usecs [ 2.133438] calling virtio_balloon_driver_init+0x0/0x2c @ 1 [ 2.133460] initcall virtio_balloon_driver_init+0x0/0x2c returned 0 after 10 usecs [ 2.133474] calling xenbus_probe_initcall+0x0/0x74 @ 1 [ 2.133483] initcall xenbus_probe_initcall+0x0/0x74 returned -19 after 0 usecs [ 2.133493] calling xenbus_init+0x0/0x60 @ 1 [ 2.133502] initcall xenbus_init+0x0/0x60 returned -19 after 0 usecs [ 2.133511] calling xenbus_backend_init+0x0/0x6c @ 1 [ 2.133519] initcall xenbus_backend_init+0x0/0x6c returned -19 after 0 usecs [ 2.133528] calling evtchn_init+0x0/0x70 @ 1 [ 2.133537] initcall evtchn_init+0x0/0x70 returned -19 after 0 usecs [ 2.133545] calling gntdev_init+0x0/0x78 @ 1 [ 2.133554] initcall gntdev_init+0x0/0x78 returned -19 after 0 usecs [ 2.133563] calling gntalloc_init+0x0/0x60 @ 1 [ 2.133571] initcall gntalloc_init+0x0/0x60 returned -19 after 0 usecs [ 2.133580] calling xenfs_init+0x0/0x40 @ 1 [ 2.133588] initcall xenfs_init+0x0/0x40 returned 0 after 0 usecs [ 2.133597] calling hyper_sysfs_init+0x0/0x134 @ 1 [ 2.133606] initcall hyper_sysfs_init+0x0/0x134 returned -19 after 0 usecs [ 2.133615] calling hypervisor_subsys_init+0x0/0x40 @ 1 [ 2.133624] initcall hypervisor_subsys_init+0x0/0x40 returned -19 after 0 usecs [ 2.133634] calling privcmd_init+0x0/0x90 @ 1 [ 2.133642] initcall privcmd_init+0x0/0x90 returned -19 after 0 usecs [ 2.133652] calling axp20x_regulator_driver_init+0x0/0x30 @ 1 [ 2.133685] initcall axp20x_regulator_driver_init+0x0/0x30 returned 0 after 23 usecs [ 2.133697] calling bd718xx_regulator_init+0x0/0x30 @ 1 [ 2.133729] initcall bd718xx_regulator_init+0x0/0x30 returned 0 after 22 usecs [ 2.133741] calling bd9571mwv_regulator_driver_init+0x0/0x30 @ 1 [ 2.133773] initcall bd9571mwv_regulator_driver_init+0x0/0x30 returned 0 after 22 usecs [ 2.133785] calling fan53555_regulator_driver_init+0x0/0x30 @ 1 [ 2.133817] initcall fan53555_regulator_driver_init+0x0/0x30 returned 0 after 22 usecs [ 2.133829] calling hi6421v530_regulator_driver_init+0x0/0x30 @ 1 [ 2.133865] initcall hi6421v530_regulator_driver_init+0x0/0x30 returned 0 after 26 usecs [ 2.133877] calling max77620_regulator_driver_init+0x0/0x30 @ 1 [ 2.133911] initcall max77620_regulator_driver_init+0x0/0x30 returned 0 after 24 usecs [ 2.133923] calling qcom_spmi_regulator_driver_init+0x0/0x30 @ 1 [ 2.134017] initcall qcom_spmi_regulator_driver_init+0x0/0x30 returned 0 after 83 usecs [ 2.134029] calling pfuze_driver_init+0x0/0x30 @ 1 [ 2.134057] initcall pfuze_driver_init+0x0/0x30 returned 0 after 18 usecs [ 2.134067] calling pwm_regulator_driver_init+0x0/0x30 @ 1 [ 2.134114] initcall pwm_regulator_driver_init+0x0/0x30 returned 0 after 36 usecs [ 2.134125] calling rk808_regulator_driver_init+0x0/0x30 @ 1 [ 2.134159] initcall rk808_regulator_driver_init+0x0/0x30 returned 0 after 24 usecs [ 2.134171] calling s2mps11_pmic_driver_init+0x0/0x30 @ 1 [ 2.134205] initcall s2mps11_pmic_driver_init+0x0/0x30 returned 0 after 24 usecs [ 2.134217] calling brcm_rescal_reset_driver_init+0x0/0x30 @ 1 [ 2.134263] initcall brcm_rescal_reset_driver_init+0x0/0x30 returned 0 after 36 usecs [ 2.134276] calling n_null_init+0x0/0x38 @ 1 [ 2.134285] initcall n_null_init+0x0/0x38 returned 0 after 0 usecs [ 2.134294] calling ttynull_init+0x0/0x114 @ 1 [ 2.134388] initcall ttynull_init+0x0/0x114 returned 0 after 83 usecs [ 2.134400] calling pty_init+0x0/0x380 @ 1 [ 2.135702] initcall pty_init+0x0/0x380 returned 0 after 1263 usecs [ 2.135716] calling sysrq_init+0x0/0x90 @ 1 [ 2.135738] initcall sysrq_init+0x0/0x90 returned 0 after 13 usecs [ 2.135749] calling xen_hvc_init+0x0/0x298 @ 1 [ 2.135758] initcall xen_hvc_init+0x0/0x298 returned -19 after 0 usecs [ 2.135768] calling serial8250_init+0x0/0x16c @ 1 [ 2.135777] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.136340] initcall serial8250_init+0x0/0x16c returned 0 after 550 usecs [ 2.136355] calling serial_pci_driver_init+0x0/0x38 @ 1 [ 2.136423] initcall serial_pci_driver_init+0x0/0x38 returned 0 after 57 usecs [ 2.136435] calling exar_pci_driver_init+0x0/0x38 @ 1 [ 2.136464] initcall exar_pci_driver_init+0x0/0x38 returned 0 after 18 usecs [ 2.136475] calling fsl8250_platform_driver_init+0x0/0x30 @ 1 [ 2.136510] initcall fsl8250_platform_driver_init+0x0/0x30 returned 0 after 24 usecs [ 2.136523] calling dw8250_platform_driver_init+0x0/0x30 @ 1 [ 2.136592] initcall dw8250_platform_driver_init+0x0/0x30 returned 0 after 59 usecs [ 2.136605] calling of_platform_serial_driver_init+0x0/0x30 @ 1 [ 2.136881] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 24, base_baud = 12500000) is a 16550A [ 10.438346] printk: console [ttyS0] enabled [ 10.442935] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 24, base_baud = 12500000) is a 16550A [ 10.451984] initcall of_platform_serial_driver_init+0x0/0x30 returned 0 after 8120478 usecs [ 10.460390] calling lpuart_serial_init+0x0/0x6c @ 1 [ 10.465519] 2270000.serial: ttyLP2 at MMIO 0x2270000 (irq = 25, base_baud = 12500000) is a FSL_LPUART [ 10.475022] initcall lpuart_serial_init+0x0/0x6c returned 0 after 9414 usecs [ 10.482126] calling init+0x0/0x124 @ 1 [ 10.486027] initcall init+0x0/0x124 returned 0 after 42 usecs [ 10.491813] calling tpm_tis_i2c_driver_init+0x0/0x30 @ 1 [ 10.497270] initcall tpm_tis_i2c_driver_init+0x0/0x30 returned 0 after 29 usecs [ 10.504617] calling arm_smmu_driver_init+0x0/0x30 @ 1 [ 10.510295] arm-smmu 5000000.iommu: probing hardware configuration... [ 10.516768] arm-smmu 5000000.iommu: SMMUv2 with: [ 10.521406] arm-smmu 5000000.iommu: stage 1 translation [ 10.526740] arm-smmu 5000000.iommu: stage 2 translation [ 10.532075] arm-smmu 5000000.iommu: nested translation [ 10.537324] arm-smmu 5000000.iommu: stream matching with 128 register groups [ 10.544493] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only) [ 10.551053] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000 [ 10.557523] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 10.563993] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 10.570755] initcall arm_smmu_driver_init+0x0/0x30 returned 0 after 59541 usecs [ 10.578105] calling arm_smmu_driver_init+0x0/0x34 @ 1 [ 10.583311] initcall arm_smmu_driver_init+0x0/0x34 returned 0 after 41 usecs [ 10.590395] calling drm_kms_helper_init+0x0/0x2c @ 1 [ 10.595472] initcall drm_kms_helper_init+0x0/0x2c returned 0 after 0 usecs [ 10.602379] calling drm_core_init+0x0/0xc8 @ 1 [ 10.606951] initcall drm_core_init+0x0/0xc8 returned 0 after 19 usecs [ 10.613425] calling topology_sysfs_init+0x0/0x48 @ 1 [ 10.618534] initcall topology_sysfs_init+0x0/0x48 returned 0 after 32 usecs [ 10.625530] calling cacheinfo_sysfs_init+0x0/0x48 @ 1 [ 10.630833] initcall cacheinfo_sysfs_init+0x0/0x48 returned 0 after 133 usecs [ 10.638009] calling auxiliary_bus_init+0x0/0x2c @ 1 [ 10.643012] initcall auxiliary_bus_init+0x0/0x2c returned 0 after 13 usecs [ 10.649921] calling devcoredump_init+0x0/0x38 @ 1 [ 10.654744] initcall devcoredump_init+0x0/0x38 returned 0 after 8 usecs [ 10.661391] calling loop_init+0x0/0x160 @ 1 [ 10.669667] loop: module loaded [ 10.672831] initcall loop_init+0x0/0x160 returned 0 after 6980 usecs [ 10.679230] calling init+0x0/0xac @ 1 [ 10.683023] initcall init+0x0/0xac returned 0 after 23 usecs [ 10.688711] calling xlblk_init+0x0/0x158 @ 1 [ 10.693093] initcall xlblk_init+0x0/0x158 returned -19 after 0 usecs [ 10.699479] calling at24_init+0x0/0x6c @ 1 [ 10.703780] at24 0-0050: supply vcc not found, using dummy regulator [ 10.710233] at24 0-0050: Linked as a consumer to regulator.0 [ 10.716714] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write [ 10.723618] at24 1-0057: supply vcc not found, using dummy regulator [ 10.730062] at24 1-0057: Linked as a consumer to regulator.0 [ 10.736516] at24 1-0057: 4096 byte 24c32 EEPROM, writable, 32 bytes/write [ 10.743411] at24 2-0050: supply vcc not found, using dummy regulator [ 10.749859] at24 2-0050: Linked as a consumer to regulator.0 [ 10.756314] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write [ 10.763177] initcall at24_init+0x0/0x6c returned 0 after 58100 usecs [ 10.769574] calling at25_driver_init+0x0/0x30 @ 1 [ 10.774402] initcall at25_driver_init+0x0/0x30 returned 0 after 11 usecs [ 10.781137] calling bd9571mwv_driver_init+0x0/0x30 @ 1 [ 10.786406] initcall bd9571mwv_driver_init+0x0/0x30 returned 0 after 18 usecs [ 10.793577] calling cros_ec_dev_init+0x0/0x94 @ 1 [ 10.798466] initcall cros_ec_dev_init+0x0/0x94 returned 0 after 73 usecs [ 10.805202] calling axp20x_i2c_driver_init+0x0/0x30 @ 1 [ 10.810567] initcall axp20x_i2c_driver_init+0x0/0x30 returned 0 after 23 usecs [ 10.817827] calling max77620_driver_init+0x0/0x30 @ 1 [ 10.823011] initcall max77620_driver_init+0x0/0x30 returned 0 after 19 usecs [ 10.830096] calling rk808_i2c_driver_init+0x0/0x30 @ 1 [ 10.835367] initcall rk808_i2c_driver_init+0x0/0x30 returned 0 after 19 usecs [ 10.842539] calling vexpress_sysreg_driver_init+0x0/0x30 @ 1 [ 10.848390] initcall vexpress_sysreg_driver_init+0x0/0x30 returned 0 after 70 usecs [ 10.856088] calling hi6421_pmic_driver_init+0x0/0x30 @ 1 [ 10.861561] initcall hi6421_pmic_driver_init+0x0/0x30 returned 0 after 45 usecs [ 10.868907] calling simple_mfd_i2c_driver_init+0x0/0x30 @ 1 [ 10.875402] platform 2000000.i2c:sl28cpld@4a:gpio@10: Linked as a sync state only consumer to 2310000.gpio [ 10.890943] sysfs: cannot create duplicate filename '/devices/platform/soc/2310000.gpio/consumer:platform:2000000.i2c:sl28cpld@4' [ 10.902677] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc2-next-20210107-00018-g832f4343aa38-dirty #307 [ 10.912635] Hardware name: Kontron KBox A-230-LS (DT) [ 10.917703] Call trace: [ 10.920152] dump_backtrace+0x0/0x1b8 [ 10.923834] show_stack+0x20/0x70 [ 10.927160] dump_stack+0xd8/0x134 [ 10.930573] sysfs_warn_dup+0x6c/0x88 [ 10.934247] sysfs_do_create_link_sd.isra.2+0x10c/0x110 [ 10.939491] sysfs_create_link+0x2c/0x50 [ 10.943426] devlink_add_symlinks+0x114/0x1e0 [ 10.947800] device_add+0x460/0x798 [ 10.951298] device_link_add+0x47c/0x670 [ 10.955231] fw_devlink_create_devlink+0xb8/0xc8 [ 10.959864] __fw_devlink_link_to_suppliers+0x84/0x180 [ 10.965020] device_add+0x778/0x798 [ 10.968517] of_device_add+0x50/0x70 [ 10.972107] of_platform_device_create_pdata+0xc8/0x118 [ 10.977353] of_platform_bus_create+0x188/0x3b8 [ 10.981900] of_platform_populate+0x84/0x110 [ 10.986185] devm_of_platform_populate+0x58/0xc0 [ 10.990819] simple_mfd_i2c_probe+0x5c/0x70 [ 10.995018] i2c_device_probe+0x178/0x2f0 [ 10.999041] really_probe+0xec/0x3c0 [ 11.002627] driver_probe_device+0xac/0xc0 [ 11.006737] device_driver_attach+0x7c/0x88 [ 11.010934] __driver_attach+0x60/0xe8 [ 11.014695] bus_for_each_dev+0x7c/0xd0 [ 11.018543] driver_attach+0x2c/0x38 [ 11.022129] bus_add_driver+0x194/0x1f8 [ 11.025976] driver_register+0x6c/0x128 [ 11.029824] i2c_register_driver+0x50/0xa0 [ 11.033933] simple_mfd_i2c_driver_init+0x24/0x30 [ 11.038655] do_one_initcall+0x54/0x2d8 [ 11.042502] kernel_init_freeable+0x200/0x26c [ 11.046874] kernel_init+0x1c/0x120 [ 11.050375] ret_from_fork+0x10/0x30 [ 11.053987] platform 2000000.i2c:sl28cpld@4a:gpio@15: Linked as a sync state only consumer to 2310000.gpio [ 11.069859] platform buttons0: Linked as a sync state only consumer to 2000000.i2c:sl28cpld@4a:interrupt-controller@1c [ 11.080658] platform 2000000.i2c:sl28cpld@4a:interrupt-controller@1c: Linked as a sync state only consumer to 2310000.gpio [ 11.092632] initcall simple_mfd_i2c_driver_init+0x0/0x30 returned 0 after 212924 usecs [ 11.100617] calling sas_transport_init+0x0/0xc8 @ 1 [ 11.105660] initcall sas_transport_init+0x0/0xc8 returned 0 after 44 usecs [ 11.112571] calling sas_class_init+0x0/0x94 @ 1 [ 11.117230] initcall sas_class_init+0x0/0x94 returned 0 after 14 usecs [ 11.123791] calling init_sd+0x0/0x1a4 @ 1 [ 11.127950] initcall init_sd+0x0/0x1a4 returned 0 after 41 usecs [ 11.133989] calling hisi_sas_init+0x0/0x98 @ 1 [ 11.138546] initcall hisi_sas_init+0x0/0x98 returned 0 after 3 usecs [ 11.144932] calling hisi_sas_v1_driver_init+0x0/0x30 @ 1 [ 11.150455] initcall hisi_sas_v1_driver_init+0x0/0x30 returned 0 after 96 usecs [ 11.157802] calling hisi_sas_v2_driver_init+0x0/0x30 @ 1 [ 11.163284] initcall hisi_sas_v2_driver_init+0x0/0x30 returned 0 after 55 usecs [ 11.170631] calling sas_v3_pci_driver_init+0x0/0x38 @ 1 [ 11.176011] initcall sas_v3_pci_driver_init+0x0/0x38 returned 0 after 38 usecs [ 11.183271] calling ahci_pci_driver_init+0x0/0x38 @ 1 [ 11.188471] initcall ahci_pci_driver_init+0x0/0x38 returned 0 after 34 usecs [ 11.195555] calling ahci_driver_init+0x0/0x30 @ 1 [ 11.200448] initcall ahci_driver_init+0x0/0x30 returned 0 after 76 usecs [ 11.207182] calling sil24_pci_driver_init+0x0/0x38 @ 1 [ 11.212462] initcall sil24_pci_driver_init+0x0/0x38 returned 0 after 28 usecs [ 11.219634] calling ceva_ahci_driver_init+0x0/0x30 @ 1 [ 11.224931] initcall ceva_ahci_driver_init+0x0/0x30 returned 0 after 44 usecs [ 11.232103] calling xgene_ahci_driver_init+0x0/0x30 @ 1 [ 11.237497] initcall xgene_ahci_driver_init+0x0/0x30 returned 0 after 51 usecs [ 11.244757] calling ahci_qoriq_driver_init+0x0/0x30 @ 1 [ 11.250182] ahci-qoriq 3200000.sata: Linked as a consumer to 5000000.iommu [ 11.257105] ahci-qoriq 3200000.sata: Adding to iommu group 0 [ 11.262916] ahci-qoriq 3200000.sata: supply ahci not found, using dummy regulator [ 11.270499] ahci-qoriq 3200000.sata: Linked as a consumer to regulator.0 [ 11.277236] ahci-qoriq 3200000.sata: supply phy not found, using dummy regulator [ 11.284701] ahci-qoriq 3200000.sata: supply target not found, using dummy regulator [ 11.292479] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 11.301502] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 11.311664] scsi host0: ahci-qoriq [ 11.315238] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 31 [ 11.323314] initcall ahci_qoriq_driver_init+0x0/0x30 returned 0 after 71503 usecs [ 11.330848] calling pata_platform_driver_init+0x0/0x30 @ 1 [ 11.336501] initcall pata_platform_driver_init+0x0/0x30 returned 0 after 50 usecs [ 11.344023] calling pata_of_platform_driver_init+0x0/0x30 @ 1 [ 11.349938] initcall pata_of_platform_driver_init+0x0/0x30 returned 0 after 52 usecs [ 11.357722] calling init_mtd+0x0/0x138 @ 1 [ 11.362003] initcall init_mtd+0x0/0x138 returned 0 after 71 usecs [ 11.368132] calling ofpart_parser_init+0x0/0x4c @ 1 [ 11.373123] initcall ofpart_parser_init+0x0/0x4c returned 0 after 0 usecs [ 11.379945] calling init_mtdblock+0x0/0x2c @ 1 [ 11.384501] initcall init_mtdblock+0x0/0x2c returned 0 after 3 usecs [ 11.390887] calling denali_dt_driver_init+0x0/0x30 @ 1 [ 11.396202] initcall denali_dt_driver_init+0x0/0x30 returned 0 after 63 usecs [ 11.403375] calling spi_nor_driver_init+0x0/0x30 @ 1 [ 11.408464] initcall spi_nor_driver_init+0x0/0x30 returned 0 after 11 usecs [ 11.415460] calling fsl_dspi_driver_init+0x0/0x30 @ 1 [ 11.421076] initcall fsl_dspi_driver_init+0x0/0x30 returned 0 after 440 usecs [ 11.428279] calling nxp_fspi_driver_init+0x0/0x30 @ 1 [ 11.433811] spi-nor spi0.0: w25q32dw (4096 Kbytes) [ 11.438885] 8 fixed-partitions partitions found on MTD device 20c0000.spi [ 11.445722] Creating 8 MTD partitions on "20c0000.spi": [ 11.450975] 0x000000000000-0x000000010000 : "rcw" [ 11.457778] 0x000000010000-0x000000100000 : "failsafe bootloader" [ 11.465740] 0x000000100000-0x000000140000 : "failsafe DP firmware" [ 11.473746] 0x000000140000-0x0000001e0000 : "failsafe trusted firmware" [ 11.481733] 0x0000001e0000-0x000000200000 : "reserved" [ 11.489734] 0x000000200000-0x000000210000 : "configuration store" [ 11.497757] 0x000000210000-0x0000003e0000 : "bootloader" [ 11.505742] 0x0000003e0000-0x000000400000 : "bootloader environment" [ 11.513950] initcall nxp_fspi_driver_init+0x0/0x30 returned 0 after 78612 usecs [ 11.521318] calling rockchip_spi_driver_init+0x0/0x30 @ 1 [ 11.526977] initcall rockchip_spi_driver_init+0x0/0x30 returned 0 after 136 usecs [ 11.534510] calling net_olddevs_init+0x0/0xa0 @ 1 [ 11.539340] initcall net_olddevs_init+0x0/0xa0 returned 0 after 7 usecs [ 11.545993] calling blackhole_netdev_init+0x0/0x9c @ 1 [ 11.551258] initcall blackhole_netdev_init+0x0/0x9c returned 0 after 14 usecs [ 11.558431] calling phy_module_init+0x0/0x34 @ 1 [ 11.563210] initcall phy_module_init+0x0/0x34 returned 0 after 50 usecs [ 11.569857] calling phy_module_init+0x0/0x34 @ 1 [ 11.574594] initcall phy_module_init+0x0/0x34 returned 0 after 9 usecs [ 11.581154] calling fixed_mdio_bus_init+0x0/0x124 @ 1 [ 11.586574] libphy: Fixed MDIO Bus: probed [ 11.590690] initcall fixed_mdio_bus_init+0x0/0x124 returned 0 after 4270 usecs [ 11.597949] calling phy_module_init+0x0/0x34 @ 1 [ 11.602813] initcall phy_module_init+0x0/0x34 returned 0 after 132 usecs [ 11.609552] calling phy_module_init+0x0/0x34 @ 1 [ 11.614425] initcall phy_module_init+0x0/0x34 returned 0 after 141 usecs [ 11.621161] calling phy_module_init+0x0/0x34 @ 1 [ 11.625900] initcall phy_module_init+0x0/0x34 returned 0 after 10 usecs [ 11.632546] calling thunder_mdiobus_driver_init+0x0/0x38 @ 1 [ 11.638366] initcall thunder_mdiobus_driver_init+0x0/0x38 returned 0 after 43 usecs [ 11.645531] ata1: SATA link down (SStatus 0 SControl 300) [ 11.646061] calling mdio_mux_mmioreg_driver_init+0x0/0x30 @ 1 [ 11.657414] initcall mdio_mux_mmioreg_driver_init+0x0/0x30 returned 0 after 79 usecs [ 11.665197] calling tun_init+0x0/0xd4 @ 1 [ 11.669314] tun: Universal TUN/TAP device driver, 1.6 [ 11.674483] initcall tun_init+0x0/0xd4 returned 0 after 5048 usecs [ 11.680699] calling virtio_net_driver_init+0x0/0xc0 @ 1 [ 11.686051] initcall virtio_net_driver_init+0x0/0xc0 returned 0 after 14 usecs [ 11.693310] calling can_dev_init+0x0/0x4c @ 1 [ 11.697774] CAN device driver interface [ 11.701624] initcall can_dev_init+0x0/0x4c returned 0 after 3760 usecs [ 11.708181] calling flexcan_driver_init+0x0/0x30 @ 1 [ 11.713741] initcall flexcan_driver_init+0x0/0x30 returned 0 after 472 usecs [ 11.720837] calling felix_vsc9959_pci_driver_init+0x0/0x38 @ 1 [ 11.726860] mscc_felix 0000:00:00.5: Linked as a consumer to 5000000.iommu [ 11.733802] mscc_felix 0000:00:00.5: Adding to iommu group 1 [ 11.739639] mscc_felix 0000:00:00.5: enabling device (0404 -> 0406) [ 11.746091] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 [ 11.752908] initcall felix_vsc9959_pci_driver_init+0x0/0x38 returned 0 after 25506 usecs [ 11.761049] calling xgbe_mod_init+0x0/0x68 @ 1 [ 11.765733] initcall xgbe_mod_init+0x0/0x68 returned 0 after 127 usecs [ 11.772295] calling macb_driver_init+0x0/0x30 @ 1 [ 11.777254] initcall macb_driver_init+0x0/0x30 returned 0 after 141 usecs [ 11.784079] calling xcv_init_module+0x0/0x5c @ 1 [ 11.788806] thunder_xcv, ver 1.0 [ 11.792069] initcall xcv_init_module+0x0/0x5c returned 0 after 3185 usecs [ 11.798891] calling bgx_init_module+0x0/0x5c @ 1 [ 11.803616] thunder_bgx, ver 1.0 [ 11.806901] initcall bgx_init_module+0x0/0x5c returned 0 after 3207 usecs [ 11.813728] calling nic_init_module+0x0/0x5c @ 1 [ 11.818456] nicpf, ver 1.0 [ 11.821189] initcall nic_init_module+0x0/0x5c returned 0 after 2668 usecs [ 11.828012] calling enetc_pf_driver_init+0x0/0x38 @ 1 [ 11.833242] sysfs: cannot create duplicate filename '/devices/platform/soc/5000000.iommu/consumer:pci:0000:00:0' [ 11.843470] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc2-next-20210107-00018-g832f4343aa38-dirty #307 [ 11.853426] Hardware name: Kontron KBox A-230-LS (DT) [ 11.858493] Call trace: [ 11.860943] dump_backtrace+0x0/0x1b8 [ 11.864624] show_stack+0x20/0x70 [ 11.867949] dump_stack+0xd8/0x134 [ 11.871362] sysfs_warn_dup+0x6c/0x88 [ 11.875036] sysfs_do_create_link_sd.isra.2+0x10c/0x110 [ 11.880280] sysfs_create_link+0x2c/0x50 [ 11.884213] devlink_add_symlinks+0x114/0x1e0 [ 11.888588] device_add+0x460/0x798 [ 11.892085] device_link_add+0x47c/0x670 [ 11.896020] arm_smmu_probe_device+0x218/0x478 [ 11.900481] __iommu_probe_device+0x5c/0x1c8 [ 11.904764] iommu_probe_device+0x30/0x138 [ 11.908873] of_iommu_configure+0x134/0x200 [ 11.913070] of_dma_configure_id+0x110/0x290 [ 11.917358] pci_dma_configure+0x4c/0xd8 [ 11.921295] really_probe+0xa8/0x3c0 [ 11.924882] driver_probe_device+0xac/0xc0 [ 11.928991] device_driver_attach+0x7c/0x88 [ 11.933188] __driver_attach+0x60/0xe8 [ 11.936949] bus_for_each_dev+0x7c/0xd0 [ 11.940797] driver_attach+0x2c/0x38 [ 11.944383] bus_add_driver+0x194/0x1f8 [ 11.948230] driver_register+0x6c/0x128 [ 11.952079] __pci_register_driver+0x4c/0x58 [ 11.956363] enetc_pf_driver_init+0x2c/0x38 [ 11.960561] do_one_initcall+0x54/0x2d8 [ 11.964408] kernel_init_freeable+0x200/0x26c [ 11.968780] kernel_init+0x1c/0x120 [ 11.972280] ret_from_fork+0x10/0x30 [ 11.975887] fsl_enetc 0000:00:00.0: Linked as a consumer to 5000000.iommu [ 11.982747] fsl_enetc 0000:00:00.0: Adding to iommu group 2 [ 12.093395] fsl_enetc 0000:00:00.0: enabling device (0400 -> 0402) [ 12.099641] fsl_enetc 0000:00:00.0: no MAC address specified for SI1, using ea:45:22:e0:2e:eb [ 12.108210] fsl_enetc 0000:00:00.0: no MAC address specified for SI2, using 9e:da:36:8f:5e:17 [ 12.117174] libphy: Freescale ENETC MDIO Bus: probed [ 12.123342] libphy: Freescale ENETC internal MDIO Bus: probed [ 12.129620] sysfs: cannot create duplicate filename '/devices/platform/soc/5000000.iommu/consumer:pci:0000:00:0' [ 12.139851] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc2-next-20210107-00018-g832f4343aa38-dirty #307 [ 12.149808] Hardware name: Kontron KBox A-230-LS (DT) [ 12.154875] Call trace: [ 12.157323] dump_backtrace+0x0/0x1b8 [ 12.161005] show_stack+0x20/0x70 [ 12.164331] dump_stack+0xd8/0x134 [ 12.167745] sysfs_warn_dup+0x6c/0x88 [ 12.171419] sysfs_do_create_link_sd.isra.2+0x10c/0x110 [ 12.176663] sysfs_create_link+0x2c/0x50 [ 12.180597] devlink_add_symlinks+0x114/0x1e0 [ 12.184970] device_add+0x460/0x798 [ 12.188467] device_link_add+0x47c/0x670 [ 12.192402] arm_smmu_probe_device+0x218/0x478 [ 12.196861] __iommu_probe_device+0x5c/0x1c8 [ 12.201146] iommu_probe_device+0x30/0x138 [ 12.205254] of_iommu_configure+0x134/0x200 [ 12.209452] of_dma_configure_id+0x110/0x290 [ 12.213739] pci_dma_configure+0x4c/0xd8 [ 12.217677] really_probe+0xa8/0x3c0 [ 12.221263] driver_probe_device+0xac/0xc0 [ 12.225372] device_driver_attach+0x7c/0x88 [ 12.229569] __driver_attach+0x60/0xe8 [ 12.233329] bus_for_each_dev+0x7c/0xd0 [ 12.237177] driver_attach+0x2c/0x38 [ 12.240762] bus_add_driver+0x194/0x1f8 [ 12.244609] driver_register+0x6c/0x128 [ 12.248458] __pci_register_driver+0x4c/0x58 [ 12.252743] enetc_pf_driver_init+0x2c/0x38 [ 12.256942] do_one_initcall+0x54/0x2d8 [ 12.260790] kernel_init_freeable+0x200/0x26c [ 12.265161] kernel_init+0x1c/0x120 [ 12.268662] ret_from_fork+0x10/0x30 [ 12.272269] fsl_enetc 0000:00:00.1: Linked as a consumer to 5000000.iommu [ 12.279124] fsl_enetc 0000:00:00.1: Adding to iommu group 3 [ 12.389391] fsl_enetc 0000:00:00.1: enabling device (0400 -> 0402) [ 12.395640] fsl_enetc 0000:00:00.1: no MAC address specified for SI1, using 5e:46:a8:bc:a8:a4 [ 12.404208] fsl_enetc 0000:00:00.1: no MAC address specified for SI2, using 72:71:49:df:30:22 [ 12.413193] mdio_bus 0000:00:00.1: Linked as a sync state only consumer to 0000:00:00.1 [ 12.421261] libphy: Freescale ENETC MDIO Bus: probed [ 12.426718] mdio_bus 0000:00:00.1:04: Linked as a sync state only consumer to 0000:00:00.1 [ 12.436358] sysfs: cannot create duplicate filename '/devices/platform/soc/5000000.iommu/consumer:pci:0000:00:0' [ 12.446608] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc2-next-20210107-00018-g832f4343aa38-dirty #307 [ 12.456565] Hardware name: Kontron KBox A-230-LS (DT) [ 12.461632] Call trace: [ 12.464082] dump_backtrace+0x0/0x1b8 [ 12.467764] show_stack+0x20/0x70 [ 12.471090] dump_stack+0xd8/0x134 [ 12.474504] sysfs_warn_dup+0x6c/0x88 [ 12.478178] sysfs_do_create_link_sd.isra.2+0x10c/0x110 [ 12.483422] sysfs_create_link+0x2c/0x50 [ 12.487357] devlink_add_symlinks+0x114/0x1e0 [ 12.491731] device_add+0x460/0x798 [ 12.495228] device_link_add+0x47c/0x670 [ 12.499162] arm_smmu_probe_device+0x218/0x478 [ 12.503622] __iommu_probe_device+0x5c/0x1c8 [ 12.507906] iommu_probe_device+0x30/0x138 [ 12.512015] of_iommu_configure+0x134/0x200 [ 12.516212] of_dma_configure_id+0x110/0x290 [ 12.520499] pci_dma_configure+0x4c/0xd8 [ 12.524437] really_probe+0xa8/0x3c0 [ 12.528023] driver_probe_device+0xac/0xc0 [ 12.532132] device_driver_attach+0x7c/0x88 [ 12.536328] __driver_attach+0x60/0xe8 [ 12.540088] bus_for_each_dev+0x7c/0xd0 [ 12.543936] driver_attach+0x2c/0x38 [ 12.547521] bus_add_driver+0x194/0x1f8 [ 12.551369] driver_register+0x6c/0x128 [ 12.555217] __pci_register_driver+0x4c/0x58 [ 12.559501] enetc_pf_driver_init+0x2c/0x38 [ 12.563700] do_one_initcall+0x54/0x2d8 [ 12.567548] kernel_init_freeable+0x200/0x26c [ 12.571919] kernel_init+0x1c/0x120 [ 12.575419] ret_from_fork+0x10/0x30 [ 12.579037] fsl_enetc 0000:00:00.2: Linked as a consumer to 5000000.iommu [ 12.585895] fsl_enetc 0000:00:00.2: Adding to iommu group 4 [ 12.697391] fsl_enetc 0000:00:00.2: enabling device (0400 -> 0402) [ 12.703637] fsl_enetc 0000:00:00.2: no MAC address specified for SI0, using 4a:b7:31:63:e2:ea [ 12.712874] sysfs: cannot create duplicate filename '/devices/platform/soc/5000000.iommu/consumer:pci:0000:00:0' [ 12.723111] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc2-next-20210107-00018-g832f4343aa38-dirty #307 [ 12.733068] Hardware name: Kontron KBox A-230-LS (DT) [ 12.738136] Call trace: [ 12.740585] dump_backtrace+0x0/0x1b8 [ 12.744263] show_stack+0x20/0x70 [ 12.747588] dump_stack+0xd8/0x134 [ 12.751001] sysfs_warn_dup+0x6c/0x88 [ 12.754674] sysfs_do_create_link_sd.isra.2+0x10c/0x110 [ 12.759918] sysfs_create_link+0x2c/0x50 [ 12.763852] devlink_add_symlinks+0x114/0x1e0 [ 12.768226] device_add+0x460/0x798 [ 12.771724] device_link_add+0x47c/0x670 [ 12.775657] arm_smmu_probe_device+0x218/0x478 [ 12.780116] __iommu_probe_device+0x5c/0x1c8 [ 12.784399] iommu_probe_device+0x30/0x138 [ 12.788508] of_iommu_configure+0x134/0x200 [ 12.792706] of_dma_configure_id+0x110/0x290 [ 12.796992] pci_dma_configure+0x4c/0xd8 [ 12.800929] really_probe+0xa8/0x3c0 [ 12.804515] driver_probe_device+0xac/0xc0 [ 12.808623] device_driver_attach+0x7c/0x88 [ 12.812820] __driver_attach+0x60/0xe8 [ 12.816580] bus_for_each_dev+0x7c/0xd0 [ 12.820426] driver_attach+0x2c/0x38 [ 12.824011] bus_add_driver+0x194/0x1f8 [ 12.827858] driver_register+0x6c/0x128 [ 12.831707] __pci_register_driver+0x4c/0x58 [ 12.835991] enetc_pf_driver_init+0x2c/0x38 [ 12.840190] do_one_initcall+0x54/0x2d8 [ 12.844037] kernel_init_freeable+0x200/0x26c [ 12.848408] kernel_init+0x1c/0x120 [ 12.851908] ret_from_fork+0x10/0x30 [ 12.855533] fsl_enetc 0000:00:00.6: Linked as a consumer to 5000000.iommu [ 12.862384] fsl_enetc 0000:00:00.6: Adding to iommu group 5 [ 12.868093] fsl_enetc 0000:00:00.6: device is disabled, skipping [ 12.874171] initcall enetc_pf_driver_init+0x0/0x38 returned 0 after 1016596 usecs [ 12.881698] calling enetc_pci_mdio_driver_init+0x0/0x38 @ 1 [ 12.887444] sysfs: cannot create duplicate filename '/devices/platform/soc/5000000.iommu/consumer:pci:0000:00:0' [ 12.897670] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.11.0-rc2-next-20210107-00018-g832f4343aa38-dirty #307 [ 12.907626] Hardware name: Kontron KBox A-230-LS (DT) [ 12.912693] Call trace: [ 12.915142] dump_backtrace+0x0/0x1b8 [ 12.918819] show_stack+0x20/0x70 [ 12.922143] dump_stack+0xd8/0x134 [ 12.925555] sysfs_warn_dup+0x6c/0x88 [ 12.929227] sysfs_do_create_link_sd.isra.2+0x10c/0x110 [ 12.934471] sysfs_create_link+0x2c/0x50 [ 12.938406] devlink_add_symlinks+0x114/0x1e0 [ 12.942779] device_add+0x460/0x798 [ 12.946276] device_link_add+0x47c/0x670 [ 12.950209] arm_smmu_probe_device+0x218/0x478 [ 12.954668] __iommu_probe_device+0x5c/0x1c8 [ 12.958951] iommu_probe_device+0x30/0x138 [ 12.963061] of_iommu_configure+0x134/0x200 [ 12.967258] of_dma_configure_id+0x110/0x290 [ 12.971544] pci_dma_configure+0x4c/0xd8 [ 12.975481] really_probe+0xa8/0x3c0 [ 12.979066] driver_probe_device+0xac/0xc0 [ 12.983175] device_driver_attach+0x7c/0x88 [ 12.987372] __driver_attach+0x60/0xe8 [ 12.991132] bus_for_each_dev+0x7c/0xd0 [ 12.994979] driver_attach+0x2c/0x38 [ 12.998565] bus_add_driver+0x194/0x1f8 [ 13.002412] driver_register+0x6c/0x128 [ 13.006261] __pci_register_driver+0x4c/0x58 [ 13.010545] enetc_pci_mdio_driver_init+0x2c/0x38 [ 13.015266] do_one_initcall+0x54/0x2d8 [ 13.019113] kernel_init_freeable+0x200/0x26c [ 13.023484] kernel_init+0x1c/0x120 [ 13.026984] ret_from_fork+0x10/0x30 [ 13.030585] fsl_enetc_mdio 0000:00:00.3: Linked as a consumer to 5000000.iommu [ 13.037862] fsl_enetc_mdio 0000:00:00.3: Adding to iommu group 6 [ 13.149397] fsl_enetc_mdio 0000:00:00.3: enabling device (0400 -> 0402) [ 13.156235] libphy: FSL PCIe IE Central MDIO Bus: probed [ 13.167238] initcall enetc_pci_mdio_driver_init+0x0/0x38 returned 0 after 273291 usecs [ 13.175226] calling hix5hd2_dev_driver_init+0x0/0x30 @ 1 [ 13.180795] initcall hix5hd2_dev_driver_init+0x0/0x30 returned 0 after 134 usecs [ 13.188242] calling hns_mdio_driver_init+0x0/0x30 @ 1 [ 13.193462] initcall hns_mdio_driver_init+0x0/0x30 returned 0 after 54 usecs [ 13.200546] calling g_dsaf_driver_init+0x0/0x30 @ 1 [ 13.205592] initcall g_dsaf_driver_init+0x0/0x30 returned 0 after 54 usecs [ 13.212505] calling hns_nic_dev_driver_init+0x0/0x30 @ 1 [ 13.217982] initcall hns_nic_dev_driver_init+0x0/0x30 returned 0 after 50 usecs [ 13.225327] calling hclge_init+0x0/0x8c @ 1 [ 13.229617] hclge is initializing [ 13.232951] initcall hclge_init+0x0/0x8c returned 0 after 3256 usecs [ 13.239335] calling hns3_init_module+0x0/0xe4 @ 1 [ 13.244148] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 13.251401] hns3: Copyright (c) 2017 Huawei Corporation. [ 13.256774] initcall hns3_init_module+0x0/0xe4 returned 0 after 12329 usecs [ 13.263772] calling igb_init_module+0x0/0x68 @ 1 [ 13.268499] igb: Intel(R) Gigabit Ethernet Network Driver [ 13.273922] igb: Copyright (c) 2007-2014 Intel Corporation. [ 13.279538] initcall igb_init_module+0x0/0x68 returned 0 after 10780 usecs [ 13.286448] calling orion_mdio_driver_init+0x0/0x30 @ 1 [ 13.291847] initcall orion_mdio_driver_init+0x0/0x30 returned 0 after 56 usecs [ 13.299117] calling sky2_init_module+0x0/0x44 @ 1 [ 13.303937] sky2: driver version 1.30 [ 13.307641] initcall sky2_init_module+0x0/0x44 returned 0 after 3617 usecs [ 13.314553] calling mscc_ocelot_driver_init+0x0/0x30 @ 1 [ 13.320031] initcall mscc_ocelot_driver_init+0x0/0x30 returned 0 after 51 usecs [ 13.327378] calling rtl8169_pci_driver_init+0x0/0x38 @ 1 [ 13.332827] initcall rtl8169_pci_driver_init+0x0/0x38 returned 0 after 21 usecs [ 13.340177] calling smc_driver_init+0x0/0x30 @ 1 [ 13.344959] initcall smc_driver_init+0x0/0x30 returned 0 after 54 usecs [ 13.351606] calling smsc911x_init_module+0x0/0x30 @ 1 [ 13.356817] initcall smsc911x_init_module+0x0/0x30 returned 0 after 44 usecs [ 13.363902] calling stmmac_init+0x0/0x60 @ 1 [ 13.368290] initcall stmmac_init+0x0/0x60 returned 0 after 9 usecs [ 13.374501] calling netif_init+0x0/0x7c @ 1 [ 13.378793] initcall netif_init+0x0/0x7c returned -19 after 0 usecs [ 13.385091] calling net_failover_init+0x0/0x18 @ 1 [ 13.389992] initcall net_failover_init+0x0/0x18 returned 0 after 0 usecs [ 13.396726] calling vfio_init+0x0/0x18c @ 1 [ 13.401120] VFIO - User Level meta-driver version: 0.3 [ 13.406288] initcall vfio_init+0x0/0x18c returned 0 after 5144 usecs [ 13.412678] calling vfio_virqfd_init+0x0/0x54 @ 1 [ 13.417574] initcall vfio_virqfd_init+0x0/0x54 returned 0 after 77 usecs [ 13.424321] calling vfio_iommu_type1_init+0x0/0x2c @ 1 [ 13.429577] initcall vfio_iommu_type1_init+0x0/0x2c returned 0 after 0 usecs [ 13.436662] calling vfio_pci_init+0x0/0x198 @ 1 [ 13.441339] initcall vfio_pci_init+0x0/0x198 returned 0 after 35 usecs [ 13.447901] calling usb_conn_driver_init+0x0/0x30 @ 1 [ 13.453128] initcall usb_conn_driver_init+0x0/0x30 returned 0 after 61 usecs [ 13.460213] calling dwc3_driver_init+0x0/0x30 @ 1 [ 13.465089] dwc3 3100000.usb: Linked as a consumer to 5000000.iommu [ 13.471408] dwc3 3100000.usb: Adding to iommu group 7 [ 13.476906] dwc3 3110000.usb: Linked as a consumer to 5000000.iommu [ 13.483222] dwc3 3110000.usb: Adding to iommu group 8 [ 13.488681] initcall dwc3_driver_init+0x0/0x30 returned 0 after 23098 usecs [ 13.495689] calling dwc3_pci_driver_init+0x0/0x38 @ 1 [ 13.500894] initcall dwc3_pci_driver_init+0x0/0x38 returned 0 after 40 usecs [ 13.507982] calling dwc3_haps_driver_init+0x0/0x38 @ 1 [ 13.513253] initcall dwc3_haps_driver_init+0x0/0x38 returned 0 after 19 usecs [ 13.520425] calling dwc3_of_simple_driver_init+0x0/0x30 @ 1 [ 13.526220] initcall dwc3_of_simple_driver_init+0x0/0x30 returned 0 after 104 usecs [ 13.533923] calling dwc2_platform_driver_init+0x0/0x30 @ 1 [ 13.539668] initcall dwc2_platform_driver_init+0x0/0x30 returned 0 after 141 usecs [ 13.547279] calling isp1760_init+0x0/0x7c @ 1 [ 13.551977] initcall isp1760_init+0x0/0x7c returned 0 after 227 usecs [ 13.558451] calling ehci_hcd_init+0x0/0xa4 @ 1 [ 13.563003] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.569557] initcall ehci_hcd_init+0x0/0xa4 returned 0 after 6401 usecs [ 13.576202] calling ehci_pci_init+0x0/0x98 @ 1 [ 13.580752] ehci-pci: EHCI PCI platform driver [ 13.585234] initcall ehci_pci_init+0x0/0x98 returned 0 after 4377 usecs [ 13.591882] calling ehci_platform_init+0x0/0x70 @ 1 [ 13.596872] ehci-platform: EHCI generic platform driver [ 13.602187] initcall ehci_platform_init+0x0/0x70 returned 0 after 5189 usecs [ 13.609270] calling ohci_hcd_mod_init+0x0/0xac @ 1 [ 13.614169] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 13.620384] initcall ohci_hcd_mod_init+0x0/0xac returned 0 after 6069 usecs [ 13.627380] calling ohci_pci_init+0x0/0x98 @ 1 [ 13.631930] ohci-pci: OHCI PCI platform driver [ 13.636413] initcall ohci_pci_init+0x0/0x98 returned 0 after 4378 usecs [ 13.643059] calling ohci_platform_init+0x0/0x70 @ 1 [ 13.648046] ohci-platform: OHCI generic platform driver [ 13.653352] initcall ohci_platform_init+0x0/0x70 returned 0 after 5181 usecs [ 13.660439] calling xhci_hcd_init+0x0/0x44 @ 1 [ 13.664996] initcall xhci_hcd_init+0x0/0x44 returned 0 after 4 usecs [ 13.671381] calling xhci_pci_init+0x0/0x78 @ 1 [ 13.675955] initcall xhci_pci_init+0x0/0x78 returned 0 after 23 usecs [ 13.682428] calling xhci_plat_init+0x0/0x44 @ 1 [ 13.687245] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 13.692767] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 13.700634] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010 [ 13.710097] xhci-hcd xhci-hcd.0.auto: irq 29, io mem 0x03100000 [ 13.716461] hub 1-0:1.0: USB hub found [ 13.720251] hub 1-0:1.0: 1 port detected [ 13.724351] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 13.729873] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 13.737571] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 13.744167] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 13.752548] hub 2-0:1.0: USB hub found [ 13.756331] hub 2-0:1.0: 1 port detected [ 13.760503] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 13.766024] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 13.773885] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010 [ 13.783353] xhci-hcd xhci-hcd.1.auto: irq 30, io mem 0x03110000 [ 13.789669] hub 3-0:1.0: USB hub found [ 13.793456] hub 3-0:1.0: 1 port detected [ 13.797546] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 13.803065] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 13.810761] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 13.817352] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 13.825776] hub 4-0:1.0: USB hub found [ 13.829563] hub 4-0:1.0: 1 port detected [ 13.833672] initcall xhci_plat_init+0x0/0x44 returned 0 after 143170 usecs [ 13.840591] calling usb_storage_driver_init+0x0/0x54 @ 1 [ 13.846087] usbcore: registered new interface driver usb-storage [ 13.852122] initcall usb_storage_driver_init+0x0/0x54 returned 0 after 5955 usecs [ 13.859643] calling usb3503_init+0x0/0x74 @ 1 [ 13.864255] initcall usb3503_init+0x0/0x74 returned 0 after 137 usecs [ 13.870730] calling musb_driver_init+0x0/0x34 @ 1 [ 13.875575] initcall musb_driver_init+0x0/0x34 returned 0 after 31 usecs [ 13.882308] calling ci_hdrc_platform_register+0x0/0x38 @ 1 [ 13.887946] initcall ci_hdrc_platform_register+0x0/0x38 returned 0 after 32 usecs [ 13.895466] calling ci_hdrc_usb2_driver_init+0x0/0x30 @ 1 [ 13.901039] initcall ci_hdrc_usb2_driver_init+0x0/0x30 returned 0 after 59 usecs [ 13.908479] calling ci_hdrc_msm_driver_init+0x0/0x30 @ 1 [ 13.913950] initcall ci_hdrc_msm_driver_init+0x0/0x30 returned 0 after 45 usecs [ 13.921295] calling ci_hdrc_pci_driver_init+0x0/0x38 @ 1 [ 13.926762] initcall ci_hdrc_pci_driver_init+0x0/0x38 returned 0 after 41 usecs [ 13.934107] calling ci_hdrc_imx_driver_init+0x0/0x30 @ 1 [ 13.939642] initcall ci_hdrc_imx_driver_init+0x0/0x30 returned 0 after 103 usecs [ 13.947075] calling usbmisc_imx_driver_init+0x0/0x30 @ 1 [ 13.952611] initcall usbmisc_imx_driver_init+0x0/0x30 returned 0 after 111 usecs [ 13.960044] calling tegra_usb_driver_init+0x0/0x30 @ 1 [ 13.965369] initcall tegra_usb_driver_init+0x0/0x30 returned 0 after 74 usecs [ 13.972546] calling gadget_cfs_init+0x0/0x40 @ 1 [ 13.977315] initcall gadget_cfs_init+0x0/0x40 returned 0 after 42 usecs [ 13.983963] calling udc_plat_driver_init+0x0/0x30 @ 1 [ 13.989188] initcall udc_plat_driver_init+0x0/0x30 returned 0 after 61 usecs [ 13.996271] calling bdc_driver_init+0x0/0x30 @ 1 [ 14.001050] initcall bdc_driver_init+0x0/0x30 returned 0 after 52 usecs [ 14.007699] calling bdc_pci_driver_init+0x0/0x38 @ 1 [ 14.012813] initcall bdc_pci_driver_init+0x0/0x38 returned 0 after 30 usecs [ 14.019810] calling acmmod_init+0x0/0x2c @ 1 [ 14.024187] initcall acmmod_init+0x0/0x2c returned 0 after 0 usecs [ 14.030399] calling userial_init+0x0/0x170 @ 1 [ 14.034962] initcall userial_init+0x0/0x170 returned 0 after 7 usecs [ 14.041349] calling gsermod_init+0x0/0x2c @ 1 [ 14.045815] initcall gsermod_init+0x0/0x2c returned 0 after 0 usecs [ 14.052111] calling obexmod_init+0x0/0x2c @ 1 [ 14.056575] initcall obexmod_init+0x0/0x2c returned 0 after 0 usecs [ 14.062870] calling ecmmod_init+0x0/0x2c @ 1 [ 14.067254] initcall ecmmod_init+0x0/0x2c returned 0 after 0 usecs [ 14.073463] calling gethmod_init+0x0/0x2c @ 1 [ 14.077926] initcall gethmod_init+0x0/0x2c returned 0 after 0 usecs [ 14.084223] calling rndismod_init+0x0/0x2c @ 1 [ 14.088774] initcall rndismod_init+0x0/0x2c returned 0 after 0 usecs [ 14.095160] calling mass_storagemod_init+0x0/0x30 @ 1 [ 14.100323] initcall mass_storagemod_init+0x0/0x30 returned 0 after 0 usecs [ 14.107318] calling eth_driver_init+0x0/0x2c @ 1 [ 14.112045] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers [ 14.120957] initcall eth_driver_init+0x0/0x2c returned 0 after 8704 usecs [ 14.127776] calling msg_driver_init+0x0/0x2c @ 1 [ 14.132502] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers [ 14.137389] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 14.142023] initcall msg_driver_init+0x0/0x2c returned 0 after 9298 usecs [ 14.155403] calling init+0x0/0xd4 @ 1 [ 14.159195] udc-core: couldn't find an available UDC - added [g_serial] to list of pending drivers [ 14.168201] initcall init+0x0/0xd4 returned 0 after 8795 usecs [ 14.174061] calling ambakmi_driver_init+0x0/0x2c @ 1 [ 14.179154] initcall ambakmi_driver_init+0x0/0x2c returned 0 after 17 usecs [ 14.186149] calling input_leds_init+0x0/0x2c @ 1 [ 14.190875] initcall input_leds_init+0x0/0x2c returned 0 after 1 usecs [ 14.197432] calling evdev_init+0x0/0x2c @ 1 [ 14.201722] initcall evdev_init+0x0/0x2c returned 0 after 0 usecs [ 14.207843] calling atkbd_init+0x0/0x48 @ 1 [ 14.212173] initcall atkbd_init+0x0/0x48 returned 0 after 36 usecs [ 14.218391] calling cros_ec_keyb_driver_init+0x0/0x30 @ 1 [ 14.223989] initcall cros_ec_keyb_driver_init+0x0/0x30 returned 0 after 81 usecs [ 14.231422] calling gpio_keys_polled_driver_init+0x0/0x30 @ 1 [ 14.237444] input: buttons1 as /devices/platform/buttons1/input/input0 [ 14.244743] initcall gpio_keys_polled_driver_init+0x0/0x30 returned 0 after 7285 usecs [ 14.252705] calling psmouse_init+0x0/0xa4 @ 1 [ 14.257229] initcall psmouse_init+0x0/0xa4 returned 0 after 54 usecs [ 14.263619] calling xenkbd_init+0x0/0x58 @ 1 [ 14.267997] initcall xenkbd_init+0x0/0x58 returned -19 after 0 usecs [ 14.274381] calling cros_ec_rtc_driver_init+0x0/0x30 @ 1 [ 14.279849] initcall cros_ec_rtc_driver_init+0x0/0x30 returned 0 after 38 usecs [ 14.287202] calling ds323x_init+0x0/0x88 @ 1 [ 14.291625] initcall ds323x_init+0x0/0x88 returned 0 after 37 usecs [ 14.297927] calling efi_rtc_driver_init+0x0/0x38 @ 1 [ 14.303041] initcall efi_rtc_driver_init+0x0/0x38 returned -19 after 38 usecs [ 14.310233] calling ftm_alarm_init+0x0/0x30 @ 1 [ 14.315327] ftm-alarm 2800000.timer: registered as rtc1 [ 14.320642] initcall ftm_alarm_init+0x0/0x30 returned 0 after 5615 usecs [ 14.327380] calling max77686_rtc_driver_init+0x0/0x30 @ 1 [ 14.332948] initcall max77686_rtc_driver_init+0x0/0x30 returned 0 after 48 usecs [ 14.340391] calling pl031_driver_init+0x0/0x2c @ 1 [ 14.345307] initcall pl031_driver_init+0x0/0x2c returned 0 after 13 usecs [ 14.352128] calling rv8803_driver_init+0x0/0x30 @ 1 [ 14.357749] rtc-rv8803 0-0032: Voltage low, temperature compensation stopped. [ 14.364929] rtc-rv8803 0-0032: Voltage low, data loss detected. [ 14.370957] hub 3-1:1.0: USB hub found [ 14.371955] rtc-rv8803 0-0032: Voltage low, data is invalid. [ 14.380438] hub 3-1:1.0: 7 ports detected [ 14.384512] rtc-rv8803 0-0032: registered as rtc0 [ 14.389829] rtc-rv8803 0-0032: Voltage low, data is invalid. [ 14.395528] rtc-rv8803 0-0032: hctosys: unable to read the hardware clock [ 14.402488] initcall rv8803_driver_init+0x0/0x30 returned 0 after 44308 usecs [ 14.409663] calling s5m_rtc_driver_init+0x0/0x30 @ 1 [ 14.414803] initcall s5m_rtc_driver_init+0x0/0x30 returned 0 after 62 usecs [ 14.421800] calling i2c_dev_init+0x0/0xf0 @ 1 [ 14.426270] i2c /dev entries driver [ 14.429976] initcall i2c_dev_init+0x0/0xf0 returned 0 after 3618 usecs [ 14.436552] calling rk3x_i2c_driver_init+0x0/0x30 @ 1 [ 14.441857] initcall rk3x_i2c_driver_init+0x0/0x30 returned 0 after 128 usecs [ 14.449038] calling ec_i2c_tunnel_driver_init+0x0/0x30 @ 1 [ 14.454718] initcall ec_i2c_tunnel_driver_init+0x0/0x30 returned 0 after 68 usecs [ 14.462243] calling pca954x_driver_init+0x0/0x30 @ 1 [ 14.467354] initcall pca954x_driver_init+0x0/0x30 returned 0 after 31 usecs [ 14.474351] calling vexpress_reset_driver_init+0x0/0x30 @ 1 [ 14.480100] initcall vexpress_reset_driver_init+0x0/0x30 returned 0 after 61 usecs [ 14.487708] calling xgene_reboot_init+0x0/0x30 @ 1 [ 14.492663] initcall xgene_reboot_init+0x0/0x30 returned 0 after 49 usecs [ 14.499486] calling syscon_reboot_driver_init+0x0/0x30 @ 1 [ 14.505235] initcall syscon_reboot_driver_init+0x0/0x30 returned 0 after 146 usecs [ 14.512847] calling syscon_reboot_mode_driver_init+0x0/0x30 @ 1 [ 14.518936] initcall syscon_reboot_mode_driver_init+0x0/0x30 returned 0 after 48 usecs [ 14.526896] calling bq27xxx_battery_i2c_driver_init+0x0/0x30 @ 1 [ 14.533061] initcall bq27xxx_battery_i2c_driver_init+0x0/0x30 returned 0 after 40 usecs [ 14.541105] calling scpi_hwmon_platdrv_init+0x0/0x30 @ 1 [ 14.546585] initcall scpi_hwmon_platdrv_init+0x0/0x30 returned 0 after 54 usecs [ 14.553931] calling sl28cpld_hwmon_driver_init+0x0/0x30 @ 1 [ 14.559861] initcall sl28cpld_hwmon_driver_init+0x0/0x30 returned 0 after 218 usecs [ 14.567580] calling sp805_wdt_driver_init+0x0/0x2c @ 1 [ 14.573041] sp805-wdt c000000.watchdog: registration successful [ 14.579095] sp805-wdt c010000.watchdog: registration successful [ 14.585073] initcall sp805_wdt_driver_init+0x0/0x2c returned 0 after 11935 usecs [ 14.592509] calling dw_wdt_driver_init+0x0/0x30 @ 1 [ 14.597568] initcall dw_wdt_driver_init+0x0/0x30 returned 0 after 69 usecs [ 14.604477] calling imx2_wdt_driver_init+0x0/0x38 @ 1 [ 14.609696] initcall imx2_wdt_driver_init+0x0/0x38 returned -19 after 55 usecs [ 14.616956] calling sl28cpld_wdt_driver_init+0x0/0x30 @ 1 [ 14.624243] sl28cpld-wdt 2000000.i2c:sl28cpld@4a:watchdog@4: initial timeout 6 sec [ 14.631891] initcall sl28cpld_wdt_driver_init+0x0/0x30 returned 0 after 9202 usecs [ 14.639521] calling dt_cpufreq_platdrv_init+0x0/0x30 @ 1 [ 14.644988] initcall dt_cpufreq_platdrv_init+0x0/0x30 returned 0 after 39 usecs [ 14.652334] calling scpi_cpufreq_platdrv_init+0x0/0x30 @ 1 [ 14.657965] initcall scpi_cpufreq_platdrv_init+0x0/0x30 returned 0 after 30 usecs [ 14.665486] calling arm_idle_init+0x0/0x190 @ 1 [ 14.670141] initcall arm_idle_init+0x0/0x190 returned -95 after 14 usecs [ 14.676896] calling psci_idle_init+0x0/0xc0 @ 1 [ 14.681725] initcall psci_idle_init+0x0/0xc0 returned 0 after 176 usecs [ 14.688378] calling mmc_pwrseq_simple_driver_init+0x0/0x30 @ 1 [ 14.694388] initcall mmc_pwrseq_simple_driver_init+0x0/0x30 returned 0 after 59 usecs [ 14.702279] calling mmc_pwrseq_emmc_driver_init+0x0/0x30 @ 1 [ 14.708115] initcall mmc_pwrseq_emmc_driver_init+0x0/0x30 returned 0 after 50 usecs [ 14.715811] calling mmc_blk_init+0x0/0x124 @ 1 [ 14.720394] initcall mmc_blk_init+0x0/0x124 returned 0 after 29 usecs [ 14.726869] calling mmci_driver_init+0x0/0x30 @ 1 [ 14.731699] initcall mmci_driver_init+0x0/0x30 returned 0 after 15 usecs [ 14.738434] calling sdhci_drv_init+0x0/0x3c @ 1 [ 14.743075] sdhci: Secure Digital Host Controller Interface driver [ 14.749281] sdhci: Copyright(c) Pierre Ossman [ 14.753656] initcall sdhci_drv_init+0x0/0x3c returned 0 after 10332 usecs [ 14.760477] calling sdhci_acpi_driver_init+0x0/0x30 @ 1 [ 14.765390] usb 3-1.6: new full-speed USB device number 3 using xhci-hcd [ 14.765849] initcall sdhci_acpi_driver_init+0x0/0x30 returned 0 after 32 usecs [ 14.779797] calling sdhci_f_sdh30_driver_init+0x0/0x30 @ 1 [ 14.785479] initcall sdhci_f_sdh30_driver_init+0x0/0x30 returned 0 after 61 usecs [ 14.793007] calling mmc_spi_driver_init+0x0/0x30 @ 1 [ 14.798099] initcall mmc_spi_driver_init+0x0/0x30 returned 0 after 14 usecs [ 14.805095] calling dw_mci_init+0x0/0x30 @ 1 [ 14.809489] Synopsys Designware Multimedia Card Interface Driver [ 14.815531] initcall dw_mci_init+0x0/0x30 returned 0 after 5900 usecs [ 14.822003] calling dw_mci_pltfm_driver_init+0x0/0x30 @ 1 [ 14.827585] initcall dw_mci_pltfm_driver_init+0x0/0x30 returned 0 after 64 usecs [ 14.835019] calling dw_mci_exynos_pltfm_driver_init+0x0/0x30 @ 1 [ 14.841219] initcall dw_mci_exynos_pltfm_driver_init+0x0/0x30 returned 0 after 76 usecs [ 14.849280] calling dw_mci_hi3798cv200_driver_init+0x0/0x30 @ 1 [ 14.855371] initcall dw_mci_hi3798cv200_driver_init+0x0/0x30 returned 0 after 49 usecs [ 14.863332] calling dw_mci_k3_pltfm_driver_init+0x0/0x30 @ 1 [ 14.869168] initcall dw_mci_k3_pltfm_driver_init+0x0/0x30 returned 0 after 60 usecs [ 14.876870] calling sdhci_pltfm_drv_init+0x0/0x30 @ 1 [ 14.882040] sdhci-pltfm: SDHCI platform and OF driver helper [ 14.887726] initcall sdhci_pltfm_drv_init+0x0/0x30 returned 0 after 5553 usecs [ 14.894985] calling sdhci_cdns_driver_init+0x0/0x30 @ 1 [ 14.900382] initcall sdhci_cdns_driver_init+0x0/0x30 returned 0 after 58 usecs [ 14.907660] calling sdhci_arasan_driver_init+0x0/0x30 @ 1 [ 14.913318] initcall sdhci_arasan_driver_init+0x0/0x30 returned 0 after 123 usecs [ 14.920857] calling sdhci_esdhc_driver_init+0x0/0x30 @ 1 [ 14.926397] sdhci-esdhc 2140000.mmc: Linked as a consumer to 5000000.iommu [ 14.926411] initcall sdhci_esdhc_driver_init+0x0/0x30 returned 0 after 109 usecs [ 14.933338] sdhci-esdhc 2150000.mmc: Linked as a consumer to 5000000.iommu [ 14.940751] calling sdhci_xenon_driver_init+0x0/0x30 @ 1 [ 14.947703] sdhci-esdhc 2140000.mmc: Adding to iommu group 9 [ 14.953164] initcall sdhci_xenon_driver_init+0x0/0x30 returned 0 after 65 usecs [ 14.958801] sdhci-esdhc 2150000.mmc: Adding to iommu group 10 [ 14.966117] calling gpio_led_driver_init+0x0/0x30 @ 1 [ 14.981783] initcall gpio_led_driver_init+0x0/0x30 returned 0 after 4633 usecs [ 14.989058] calling led_pwm_driver_init+0x0/0x30 @ 1 [ 14.994209] initcall led_pwm_driver_init+0x0/0x30 returned 0 after 64 usecs [ 14.997942] mmc1: SDHCI controller on 2140000.mmc [2140000.mmc] using ADMA [ 15.001206] calling syscon_led_driver_init+0x0/0x30 @ 1 [ 15.008197] mmc0: SDHCI controller on 2150000.mmc [2150000.mmc] using ADMA [ 15.013508] initcall syscon_led_driver_init+0x0/0x30 returned 0 after 53 usecs [ 15.027647] calling ledtrig_disk_init+0x0/0x74 @ 1 [ 15.032593] initcall ledtrig_disk_init+0x0/0x74 returned 0 after 34 usecs [ 15.039427] calling heartbeat_trig_init+0x0/0x5c @ 1 [ 15.044563] initcall heartbeat_trig_init+0x0/0x5c returned 0 after 40 usecs [ 15.051597] calling ledtrig_cpu_init+0x0/0x12c @ 1 [ 15.056565] ledtrig-cpu: registered to indicate activity on CPUs [ 15.062636] initcall ledtrig_cpu_init+0x0/0x12c returned 0 after 5985 usecs [ 15.069668] calling defon_led_trigger_init+0x0/0x2c @ 1 [ 15.075078] initcall defon_led_trigger_init+0x0/0x2c returned 0 after 62 usecs [ 15.082390] calling ledtrig_panic_init+0x0/0x5c @ 1 [ 15.087401] initcall ledtrig_panic_init+0x0/0x5c returned 0 after 9 usecs [ 15.094241] calling scpi_driver_init+0x0/0x30 @ 1 [ 15.099152] initcall scpi_driver_init+0x0/0x30 returned 0 after 90 usecs [ 15.105892] calling scpi_power_domain_driver_init+0x0/0x30 @ 1 [ 15.111897] initcall scpi_power_domain_driver_init+0x0/0x30 returned 0 after 49 usecs [ 15.119768] calling esrt_sysfs_init+0x0/0x2b0 @ 1 [ 15.124583] initcall esrt_sysfs_init+0x0/0x2b0 returned -38 after 0 usecs [ 15.131414] calling efivars_pstore_init+0x0/0xd8 @ 1 [ 15.136496] initcall efivars_pstore_init+0x0/0xd8 returned 0 after 0 usecs [ 15.143411] calling efi_capsule_loader_init+0x0/0x68 @ 1 [ 15.148837] initcall efi_capsule_loader_init+0x0/0x68 returned -19 after 0 usecs [ 15.156274] calling smccc_soc_init+0x0/0x27c @ 1 [ 15.161003] initcall smccc_soc_init+0x0/0x27c returned 0 after 0 usecs [ 15.167565] calling meson_crypto_driver_init+0x0/0x30 @ 1 [ 15.173138] initcall meson_crypto_driver_init+0x0/0x30 returned 0 after 53 usecs [ 15.180581] calling hid_init+0x0/0x6c @ 1 [ 15.184729] initcall hid_init+0x0/0x6c returned 0 after 24 usecs [ 15.190778] calling hid_generic_init+0x0/0x38 @ 1 [ 15.195632] initcall hid_generic_init+0x0/0x38 returned 0 after 33 usecs [ 15.202372] calling a4_driver_init+0x0/0x38 @ 1 [ 15.207061] initcall a4_driver_init+0x0/0x38 returned 0 after 40 usecs [ 15.213636] calling apple_driver_init+0x0/0x38 @ 1 [ 15.218569] initcall apple_driver_init+0x0/0x38 returned 0 after 22 usecs [ 15.225399] calling belkin_driver_init+0x0/0x38 @ 1 [ 15.230413] initcall belkin_driver_init+0x0/0x38 returned 0 after 18 usecs [ 15.237331] calling ch_driver_init+0x0/0x38 @ 1 [ 15.241992] initcall ch_driver_init+0x0/0x38 returned 0 after 16 usecs [ 15.248577] calling ch_driver_init+0x0/0x38 @ 1 [ 15.253221] random: fast init done [ 15.256676] initcall ch_driver_init+0x0/0x38 returned 0 after 17 usecs [ 15.263243] calling cp_driver_init+0x0/0x38 @ 1 [ 15.267904] initcall cp_driver_init+0x0/0x38 returned 0 after 16 usecs [ 15.274471] calling ez_driver_init+0x0/0x38 @ 1 [ 15.279131] initcall ez_driver_init+0x0/0x38 returned 0 after 16 usecs [ 15.285698] calling ite_driver_init+0x0/0x38 @ 1 [ 15.290447] initcall ite_driver_init+0x0/0x38 returned 0 after 16 usecs [ 15.297100] calling ks_driver_init+0x0/0x38 @ 1 [ 15.301762] initcall ks_driver_init+0x0/0x38 returned 0 after 16 usecs [ 15.308327] calling lg_driver_init+0x0/0x38 @ 1 [ 15.312995] initcall lg_driver_init+0x0/0x38 returned 0 after 20 usecs [ 15.319561] calling lg_g15_driver_init+0x0/0x38 @ 1 [ 15.324579] initcall lg_g15_driver_init+0x0/0x38 returned 0 after 23 usecs [ 15.331498] calling ms_driver_init+0x0/0x38 @ 1 [ 15.336167] initcall ms_driver_init+0x0/0x38 returned 0 after 18 usecs [ 15.342738] calling mr_driver_init+0x0/0x38 @ 1 [ 15.347412] initcall mr_driver_init+0x0/0x38 returned 0 after 28 usecs [ 15.353980] mmc0: new HS400 MMC card at address 0001 [ 15.353980] calling redragon_driver_init+0x0/0x38 @ 1 [ 15.359351] mmcblk0: mmc0:0001 S0J58X 29.6 GiB [ 15.364165] initcall redragon_driver_init+0x0/0x38 returned 0 after 34 usecs [ 15.368912] mmcblk0boot0: mmc0:0001 S0J58X partition 1 31.5 MiB [ 15.375772] calling hid_init+0x0/0x84 @ 1 [ 15.381932] mmcblk0boot1: mmc0:0001 S0J58X partition 2 31.5 MiB [ 15.387233] hid-generic 0003:064F:2AF9.0001: device has no listeners, quitting [ 15.391857] mmcblk0rpmb: mmc0:0001 S0J58X partition 3 4.00 MiB, chardev (240:0) [ 15.399171] usbcore: registered new interface driver usbhid [ 15.412063] usbhid: USB HID core driver [ 15.412075] mmcblk0: p1 p2 [ 15.415923] initcall hid_init+0x0/0x84 returned 0 after 29401 usecs [ 15.425040] calling cros_ec_driver_init+0x0/0x30 @ 1 [ 15.430162] initcall cros_ec_driver_init+0x0/0x30 returned 0 after 39 usecs [ 15.437164] calling cros_ec_driver_spi_init+0x0/0x30 @ 1 [ 15.442605] initcall cros_ec_driver_spi_init+0x0/0x30 returned 0 after 16 usecs [ 15.449950] calling cros_ec_chardev_driver_init+0x0/0x30 @ 1 [ 15.455824] initcall cros_ec_chardev_driver_init+0x0/0x30 returned 0 after 98 usecs [ 15.463519] calling cros_ec_lightbar_driver_init+0x0/0x30 @ 1 [ 15.469413] initcall cros_ec_lightbar_driver_init+0x0/0x30 returned 0 after 31 usecs [ 15.477195] calling cros_ec_vbc_driver_init+0x0/0x30 @ 1 [ 15.482656] initcall cros_ec_vbc_driver_init+0x0/0x30 returned 0 after 36 usecs [ 15.490002] calling cros_ec_debugfs_driver_init+0x0/0x30 @ 1 [ 15.495811] initcall cros_ec_debugfs_driver_init+0x0/0x30 returned 0 after 32 usecs [ 15.503506] calling cros_ec_sensorhub_driver_init+0x0/0x30 @ 1 [ 15.509486] initcall cros_ec_sensorhub_driver_init+0x0/0x30 returned 0 after 31 usecs [ 15.517355] calling cros_ec_sysfs_driver_init+0x0/0x34 @ 1 [ 15.522986] initcall cros_ec_sysfs_driver_init+0x0/0x34 returned 0 after 31 usecs [ 15.530506] calling cros_usbpd_notify_init+0x0/0x50 @ 1 [ 15.535914] initcall cros_usbpd_notify_init+0x0/0x50 returned 0 after 62 usecs [ 15.543177] calling arm_mhu_driver_init+0x0/0x2c @ 1 [ 15.548267] initcall arm_mhu_driver_init+0x0/0x2c returned 0 after 13 usecs [ 15.555266] calling arm_mhu_db_driver_init+0x0/0x2c @ 1 [ 15.560615] initcall arm_mhu_db_driver_init+0x0/0x2c returned 0 after 10 usecs [ 15.567873] calling platform_mhu_driver_init+0x0/0x30 @ 1 [ 15.573454] initcall platform_mhu_driver_init+0x0/0x30 returned 0 after 67 usecs [ 15.580887] calling qcom_glink_ssr_driver_init+0x0/0x34 @ 1 [ 15.586584] initcall qcom_glink_ssr_driver_init+0x0/0x34 returned 0 after 10 usecs [ 15.594191] calling extcon_class_init+0x0/0x38 @ 1 [ 15.599101] initcall extcon_class_init+0x0/0x38 returned 0 after 9 usecs [ 15.605834] calling usb_extcon_driver_init+0x0/0x30 @ 1 [ 15.611222] initcall usb_extcon_driver_init+0x0/0x30 returned 0 after 48 usecs [ 15.618483] calling extcon_cros_ec_driver_init+0x0/0x30 @ 1 [ 15.624222] initcall extcon_cros_ec_driver_init+0x0/0x30 returned 0 after 51 usecs [ 15.631829] calling hisi_l3c_pmu_module_init+0x0/0x98 @ 1 [ 15.637381] initcall hisi_l3c_pmu_module_init+0x0/0x98 returned 0 after 38 usecs [ 15.644820] calling hisi_hha_pmu_module_init+0x0/0x98 @ 1 [ 15.650364] initcall hisi_hha_pmu_module_init+0x0/0x98 returned 0 after 31 usecs [ 15.657797] calling hisi_ddrc_pmu_module_init+0x0/0x98 @ 1 [ 15.663427] initcall hisi_ddrc_pmu_module_init+0x0/0x98 returned 0 after 30 usecs [ 15.670947] calling optee_driver_init+0x0/0x30 @ 1 [ 15.675897] initcall optee_driver_init+0x0/0x30 returned 0 after 48 usecs [ 15.682722] calling alsa_timer_init+0x0/0x23c @ 1 [ 15.687641] initcall alsa_timer_init+0x0/0x23c returned 0 after 102 usecs [ 15.694466] calling alsa_pcm_init+0x0/0x8c @ 1 [ 15.699022] initcall alsa_pcm_init+0x0/0x8c returned 0 after 3 usecs [ 15.705405] calling snd_soc_init+0x0/0x98 @ 1 [ 15.710116] initcall snd_soc_init+0x0/0x98 returned 0 after 240 usecs [ 15.716591] calling wm8904_i2c_driver_init+0x0/0x30 @ 1 [ 15.721961] initcall wm8904_i2c_driver_init+0x0/0x30 returned 0 after 32 usecs [ 15.729219] calling asoc_simple_card_init+0x0/0x30 @ 1 [ 15.734532] initcall asoc_simple_card_init+0x0/0x30 returned 0 after 62 usecs [ 15.741706] calling fsl_sai_driver_init+0x0/0x30 @ 1 [ 15.746868] initcall fsl_sai_driver_init+0x0/0x30 returned 0 after 84 usecs [ 15.753863] calling sock_diag_init+0x0/0x54 @ 1 [ 15.758524] initcall sock_diag_init+0x0/0x54 returned 0 after 22 usecs [ 15.765083] calling init_net_drop_monitor+0x0/0x13c @ 1 [ 15.770419] drop_monitor: Initializing network drop monitor service [ 15.776737] initcall init_net_drop_monitor+0x0/0x13c returned 0 after 6169 usecs [ 15.784170] calling failover_init+0x0/0x34 @ 1 [ 15.788722] initcall failover_init+0x0/0x34 returned 0 after 1 usecs [ 15.795106] calling llc_init+0x0/0x44 @ 1 [ 15.799226] initcall llc_init+0x0/0x44 returned 0 after 0 usecs [ 15.805179] calling snap_init+0x0/0x54 @ 1 [ 15.809385] initcall snap_init+0x0/0x54 returned 0 after 1 usecs [ 15.815420] calling gre_offload_init+0x0/0x68 @ 1 [ 15.820235] initcall gre_offload_init+0x0/0x68 returned 0 after 1 usecs [ 15.826881] calling sysctl_ipv4_init+0x0/0x70 @ 1 [ 15.831766] initcall sysctl_ipv4_init+0x0/0x70 returned 0 after 69 usecs [ 15.838523] calling inet_diag_init+0x0/0xb0 @ 1 [ 15.843168] initcall inet_diag_init+0x0/0xb0 returned 0 after 2 usecs [ 15.849641] calling tcp_diag_init+0x0/0x2c @ 1 [ 15.854195] initcall tcp_diag_init+0x0/0x2c returned 0 after 0 usecs [ 15.860580] calling cubictcp_register+0x0/0x70 @ 1 [ 15.865486] initcall cubictcp_register+0x0/0x70 returned 0 after 0 usecs [ 15.872221] calling inet6_init+0x0/0x350 @ 1 [ 15.876821] NET: Registered protocol family 10 [ 15.881850] Segment Routing with IPv6 [ 15.885573] initcall inet6_init+0x0/0x350 returned 0 after 8762 usecs [ 15.892071] calling packet_init+0x0/0xa4 @ 1 [ 15.896455] NET: Registered protocol family 17 [ 15.900921] initcall packet_init+0x0/0xa4 returned 0 after 4362 usecs [ 15.907394] calling br_init+0x0/0x100 @ 1 [ 15.911535] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 15.924550] initcall br_init+0x0/0x100 returned 0 after 12730 usecs [ 15.930850] calling dsa_init_module+0x0/0xc0 @ 1 [ 15.935659] initcall dsa_init_module+0x0/0xc0 returned 0 after 72 usecs [ 15.942320] calling dsa_tag_driver_module_init+0x0/0x38 @ 1 [ 15.948020] initcall dsa_tag_driver_module_init+0x0/0x38 returned 0 after 6 usecs [ 15.955543] calling can_init+0x0/0xdc @ 1 [ 15.959661] can: controller area network core [ 15.964072] NET: Registered protocol family 29 [ 15.968537] initcall can_init+0x0/0xdc returned 0 after 8668 usecs [ 15.974749] calling raw_module_init+0x0/0x58 @ 1 [ 15.979477] can: raw protocol [ 15.982455] initcall raw_module_init+0x0/0x58 returned 0 after 2908 usecs [ 15.989276] calling bcm_module_init+0x0/0x6c @ 1 [ 15.994009] can: broadcast manager protocol [ 15.998212] initcall bcm_module_init+0x0/0x6c returned 0 after 4105 usecs [ 16.005035] calling cgw_module_init+0x0/0x174 @ 1 [ 16.009849] can: netlink gateway - max_hops=1 [ 16.014277] initcall cgw_module_init+0x0/0x174 returned 0 after 4324 usecs [ 16.021190] calling init_rpcsec_gss+0x0/0x90 @ 1 [ 16.025939] initcall init_rpcsec_gss+0x0/0x90 returned 0 after 20 usecs [ 16.032588] calling init_p9+0x0/0x4c @ 1 [ 16.036672] 9pnet: Installing 9P2000 support [ 16.040962] initcall init_p9+0x0/0x4c returned 0 after 4242 usecs [ 16.047086] calling p9_virtio_init+0x0/0x68 @ 1 [ 16.051746] initcall p9_virtio_init+0x0/0x68 returned 0 after 19 usecs [ 16.058310] calling init_dns_resolver+0x0/0x7fac @ 1 [ 16.063398] Key type dns_resolver registered [ 16.067688] initcall init_dns_resolver+0x0/0x7fac returned 0 after 4199 usecs [ 16.074918] calling xen_pm_init+0x0/0x100 @ 1 [ 16.079388] initcall xen_pm_init+0x0/0x100 returned -19 after 0 usecs [ 16.085860] calling init_oops_id+0x0/0x68 @ 1 [ 16.090331] initcall init_oops_id+0x0/0x68 returned 0 after 1 usecs [ 16.096630] calling reboot_ksysfs_init+0x0/0x6c @ 1 [ 16.101625] initcall reboot_ksysfs_init+0x0/0x6c returned 0 after 6 usecs [ 16.108446] calling cpu_latency_qos_init+0x0/0x60 @ 1 [ 16.113693] initcall cpu_latency_qos_init+0x0/0x60 returned 0 after 81 usecs [ 16.120781] calling pm_debugfs_init+0x0/0x44 @ 1 [ 16.125518] initcall pm_debugfs_init+0x0/0x44 returned 0 after 9 usecs [ 16.132077] calling printk_late_init+0x0/0x154 @ 1 [ 16.136980] initcall printk_late_init+0x0/0x154 returned 0 after 2 usecs [ 16.143714] calling init_srcu_module_notifier+0x0/0x50 @ 1 [ 16.149316] initcall init_srcu_module_notifier+0x0/0x50 returned 0 after 1 usecs [ 16.156748] calling swiotlb_create_debugfs+0x0/0x78 @ 1 [ 16.162097] initcall swiotlb_create_debugfs+0x0/0x78 returned 0 after 11 usecs [ 16.169356] calling tk_debug_sleep_time_init+0x0/0x44 @ 1 [ 16.174873] initcall tk_debug_sleep_time_init+0x0/0x44 returned 0 after 4 usecs [ 16.182223] calling taskstats_init+0x0/0x5c @ 1 [ 16.186879] registered taskstats version 1 [ 16.190993] initcall taskstats_init+0x0/0x5c returned 0 after 4031 usecs [ 16.197727] calling init_trampolines+0x0/0x34 @ 1 [ 16.202543] initcall init_trampolines+0x0/0x34 returned 0 after 2 usecs [ 16.209188] calling load_system_certificate_list+0x0/0x12c @ 1 [ 16.215135] Loading compiled-in X.509 certificates [ 16.219947] initcall load_system_certificate_list+0x0/0x12c returned 0 after 4698 usecs [ 16.227990] calling fault_around_debugfs+0x0/0x44 @ 1 [ 16.233157] initcall fault_around_debugfs+0x0/0x44 returned 0 after 5 usecs [ 16.240153] calling max_swapfiles_check+0x0/0x18 @ 1 [ 16.245231] initcall max_swapfiles_check+0x0/0x18 returned 0 after 0 usecs [ 16.252140] calling split_huge_pages_debugfs+0x0/0x48 @ 1 [ 16.257659] initcall split_huge_pages_debugfs+0x0/0x48 returned 0 after 6 usecs [ 16.265006] calling check_early_ioremap_leak+0x0/0x6c @ 1 [ 16.270519] initcall check_early_ioremap_leak+0x0/0x6c returned 0 after 0 usecs [ 16.277864] calling pstore_init+0x0/0x80 @ 1 [ 16.282252] initcall pstore_init+0x0/0x80 returned 0 after 10 usecs [ 16.288549] calling init_root_keyring+0x0/0x2c @ 1 [ 16.293478] initcall init_root_keyring+0x0/0x2c returned 0 after 26 usecs [ 16.300305] calling integrity_fs_init+0x0/0x78 @ 1 [ 16.305217] initcall integrity_fs_init+0x0/0x78 returned 0 after 6 usecs [ 16.311951] calling blk_timeout_init+0x0/0x24 @ 1 [ 16.316763] initcall blk_timeout_init+0x0/0x24 returned 0 after 0 usecs [ 16.323408] calling prandom_init_late+0x0/0x4c @ 1 [ 16.328311] initcall prandom_init_late+0x0/0x4c returned 0 after 0 usecs [ 16.335045] calling pci_resource_alignment_sysfs_init+0x0/0x38 @ 1 [ 16.341344] initcall pci_resource_alignment_sysfs_init+0x0/0x38 returned 0 after 3 usecs [ 16.349474] calling pci_sysfs_init+0x0/0x70 @ 1 [ 16.354210] initcall pci_sysfs_init+0x0/0x70 returned 0 after 96 usecs [ 16.360770] calling bert_init+0x0/0x254 @ 1 [ 16.365067] initcall bert_init+0x0/0x254 returned 0 after 0 usecs [ 16.371189] calling amba_deferred_retry+0x0/0xb8 @ 1 [ 16.376266] initcall amba_deferred_retry+0x0/0xb8 returned 0 after 0 usecs [ 16.383173] calling clk_debug_init+0x0/0x134 @ 1 [ 16.389937] initcall clk_debug_init+0x0/0x134 returned 0 after 1987 usecs [ 16.396777] calling setup_vcpu_hotplug_event+0x0/0x44 @ 1 [ 16.402295] initcall setup_vcpu_hotplug_event+0x0/0x44 returned -19 after 0 usecs [ 16.409816] calling boot_wait_for_devices+0x0/0x38 @ 1 [ 16.415066] initcall boot_wait_for_devices+0x0/0x38 returned 0 after 0 usecs [ 16.422153] calling sync_state_resume_initcall+0x0/0x28 @ 1 [ 16.427845] initcall sync_state_resume_initcall+0x0/0x28 returned 0 after 1 usecs [ 16.435365] calling deferred_probe_initcall+0x0/0xc0 @ 1 [ 16.440888] fsl-edma 22c0000.dma-controller: Linked as a consumer to 5000000.iommu [ 16.448557] fsl-edma 22c0000.dma-controller: Adding to iommu group 11 [ 16.456171] pcieport 0001:00:00.0: Linked as a consumer to 5000000.iommu [ 16.462940] pcieport 0001:00:00.0: Adding to iommu group 12 [ 16.468701] pcieport 0001:00:00.0: PME: Signaling with IRQ 33 [ 16.474651] pcieport 0001:00:00.0: AER: enabled with IRQ 33 [ 16.480423] pcieport 0002:00:00.0: Linked as a consumer to 5000000.iommu [ 16.487192] pcieport 0002:00:00.0: Adding to iommu group 13 [ 16.492958] pcieport 0002:00:00.0: PME: Signaling with IRQ 35 [ 16.498869] pcieport 0002:00:00.0: AER: enabled with IRQ 35 [ 16.512065] libphy: VSC9959 internal MDIO bus: probed [ 16.517162] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 16.523994] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 16.530820] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 16.537644] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 16.623987] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:07] driver [Broadcom BCM54140] (irq=POLL) [ 16.699981] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:08] driver [Broadcom BCM54140] (irq=POLL) [ 16.771982] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:09] driver [Broadcom BCM54140] (irq=POLL) [ 16.843991] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:0a] driver [Broadcom BCM54140] (irq=POLL) [ 16.855044] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 16.862229] device eth2 entered promiscuous mode [ 16.862240] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control off [ 16.866886] DSA: tree 0 setup [ 16.877437] initcall deferred_probe_initcall+0x0/0xc0 returned 0 after 426411 usecs [ 16.885144] calling genpd_power_off_unused+0x0/0xa0 @ 1 [ 16.890486] initcall genpd_power_off_unused+0x0/0xa0 returned 0 after 0 usecs [ 16.897656] calling genpd_debug_init+0x0/0x98 @ 1 [ 16.902495] initcall genpd_debug_init+0x0/0x98 returned 0 after 24 usecs [ 16.909232] calling gpio_keys_init+0x0/0x30 @ 1 [ 16.916391] input: buttons0 as /devices/platform/buttons0/input/input1 [ 16.923137] initcall gpio_keys_init+0x0/0x30 returned 0 after 9047 usecs [ 16.929897] calling register_update_efi_random_seed+0x0/0x44 @ 1 [ 16.936026] initcall register_update_efi_random_seed+0x0/0x44 returned 0 after 0 usecs [ 16.943992] calling efi_shutdown_init+0x0/0x68 @ 1 [ 16.948895] initcall efi_shutdown_init+0x0/0x68 returned -19 after 0 usecs [ 16.955806] calling efi_earlycon_unmap_fb+0x0/0x4c @ 1 [ 16.961058] initcall efi_earlycon_unmap_fb+0x0/0x4c returned 0 after 0 usecs [ 16.968140] calling of_fdt_raw_init+0x0/0x94 @ 1 [ 16.972922] initcall of_fdt_raw_init+0x0/0x94 returned 0 after 52 usecs [ 16.979571] calling tcp_congestion_default+0x0/0x34 @ 1 [ 16.984910] initcall tcp_congestion_default+0x0/0x34 returned 0 after 1 usecs [ 16.992085] calling ip_auto_config+0x0/0xea8 @ 1 [ 16.996822] initcall ip_auto_config+0x0/0xea8 returned 0 after 9 usecs [ 17.003384] calling init_amu_fie+0x0/0x29c @ 1 [ 17.007940] initcall init_amu_fie+0x0/0x29c returned 0 after 2 usecs [ 17.014325] calling software_resume+0x0/0x1c0 @ 1 [ 17.019143] initcall software_resume+0x0/0x1c0 returned -2 after 1 usecs [ 17.025878] calling trace_eval_sync+0x0/0x34 @ 1 [ 17.030619] initcall trace_eval_sync+0x0/0x34 returned 0 after 11 usecs [ 17.037275] calling clear_boot_tracer+0x0/0x44 @ 1 [ 17.042180] initcall clear_boot_tracer+0x0/0x44 returned 0 after 0 usecs [ 17.048914] calling acpi_gpio_handle_deferred_request_irqs+0x0/0xb4 @ 1 [ 17.055655] initcall acpi_gpio_handle_deferred_request_irqs+0x0/0xb4 returned 0 after 0 usecs [ 17.064223] calling fb_logo_late_init+0x0/0x24 @ 1 [ 17.069123] initcall fb_logo_late_init+0x0/0x24 returned 0 after 0 usecs [ 17.075855] calling clk_disable_unused+0x0/0xe0 @ 1 [ 17.080869] initcall clk_disable_unused+0x0/0xe0 returned 0 after 22 usecs [ 17.087778] calling regulator_init_complete+0x0/0x5c @ 1 [ 17.093203] initcall regulator_init_complete+0x0/0x5c returned 0 after 1 usecs [ 17.100459] calling of_platform_sync_state_init+0x0/0x28 @ 1 [ 17.106234] initcall of_platform_sync_state_init+0x0/0x28 returned 0 after 0 usecs [ 17.113844] calling alsa_sound_last_init+0x0/0x98 @ 1 [ 17.119007] ALSA device list: [ 17.121986] No soundcards found. [ 17.125400] initcall alsa_sound_last_init+0x0/0x98 returned 0 after 6243 usecs [ 17.136552] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 17.143912] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 17.162334] EXT4-fs (mmcblk0p2): recovery complete [ 17.168658] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 17.178481] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 17.185537] devtmpfs: mounted [ 17.193103] Freeing unused kernel memory: 4800K [ 17.209449] Run /sbin/init as init process [ 17.213570] with arguments: [ 17.216543] /sbin/init [ 17.219259] with environment: [ 17.222417] HOME=/ [ 17.224781] TERM=linux [ 17.253444] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.

HTH, -michael