6.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Abel Vesa abel.vesa@linaro.org
commit b7881eacc07fdf50be3f33c662997541bb59366d upstream.
Ideally, the requested duty cycle should never translate to a PWM value higher than the selected resolution (PWM size), but currently the best matched period is never reported back to the PWM consumer, so the consumer will still be using the requested period which is higher than the best matched one. This will result in PWM consumer requesting duty cycle values higher than the allowed PWM value.
For example, a consumer might request a period of 5ms while the best (closest) period the PWM hardware will do is 4.26ms. For this best matched resolution, if the selected resolution is 8-bit wide, when the consumer asks for a duty cycle of 5ms, the PWM value will be 300, which is outside of what the resolution allows. This will happen with all possible resolutions when selected.
Since for these Hi-Res PWMs, the current implementation is capping the PWM value at a 15-bit resolution, even when lower resolutions are selected, the value will be wrapped around by the HW internal logic to the selected resolution.
Fix the issue by capping the PWM value to the maximum value allowed by the selected resolution.
Cc: stable@vger.kernel.org # 6.4 Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM") Signed-off-by: Abel Vesa abel.vesa@linaro.org Reviewed-by: Bjorn Andersson andersson@kernel.org Reviewed-by: Sebastian Reichel sre@kernel.org Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-2-... Signed-off-by: Lee Jones lee@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/leds/rgb/leds-qcom-lpg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/leds/rgb/leds-qcom-lpg.c +++ b/drivers/leds/rgb/leds-qcom-lpg.c @@ -529,7 +529,7 @@ static void lpg_calc_duty(struct lpg_cha unsigned int clk_rate;
if (chan->subtype == LPG_SUBTYPE_HI_RES_PWM) { - max = LPG_RESOLUTION_15BIT - 1; + max = BIT(lpg_pwm_resolution_hi_res[chan->pwm_resolution_sel]) - 1; clk_rate = lpg_clk_rates_hi_res[chan->clk_sel]; } else { max = LPG_RESOLUTION_9BIT - 1;