From: Andreas Kemnade andreas@kemnade.info
commit f804bd0dc28683a93a60f271aaefb2fc5b0853dd upstream.
Some inputs need to be wired up to produce proper measurements, without this change only near zero values are reported.
Signed-off-by: Andreas Kemnade andreas@kemnade.info Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/adc/twl6030-gpadc.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
--- a/drivers/iio/adc/twl6030-gpadc.c +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -71,6 +71,18 @@ #define TWL6030_GPADCS BIT(1) #define TWL6030_GPADCR BIT(0)
+#define USB_VBUS_CTRL_SET 0x04 +#define USB_ID_CTRL_SET 0x06 + +#define TWL6030_MISC1 0xE4 +#define VBUS_MEAS 0x01 +#define ID_MEAS 0x01 + +#define VAC_MEAS 0x04 +#define VBAT_MEAS 0x02 +#define BB_MEAS 0x01 + + /** * struct twl6030_chnl_calib - channel calibration * @gain: slope coefficient for ideal curve @@ -943,6 +955,26 @@ static int twl6030_gpadc_probe(struct pl return ret; }
+ ret = twl_i2c_write_u8(TWL_MODULE_USB, VBUS_MEAS, USB_VBUS_CTRL_SET); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + + ret = twl_i2c_write_u8(TWL_MODULE_USB, ID_MEAS, USB_ID_CTRL_SET); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, + VBAT_MEAS | BB_MEAS | BB_MEAS, + TWL6030_MISC1); + if (ret < 0) { + dev_err(dev, "failed to wire up inputs\n"); + return ret; + } + indio_dev->name = DRIVER_NAME; indio_dev->dev.parent = dev; indio_dev->info = &twl6030_gpadc_iio_info;