From: Olivier Matz olivier.matz@6wind.com
commit 7bb0fb7c63df95d6027dc50d6af3bc3bbbc25483 upstream.
When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF.
For instance, in this situation:
┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3
vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001
If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000.
This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge.
This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address.
Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel nicolas.dichtel@6wind.com Signed-off-by: Olivier Matz olivier.matz@6wind.com Tested-by: Konrad Jankowski konrad0.jankowski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -1208,9 +1208,9 @@ static int ixgbe_update_vf_xcast_mode(st return -EPERM; }
- disable = 0; + disable = IXGBE_VMOLR_VPE; enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | - IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE; + IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE; break; default: return -EOPNOTSUPP;