The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 3241929b67d28c83945d3191c6816a3271fd6b85 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= pali@kernel.org Date: Mon, 1 Feb 2021 16:08:03 +0100 Subject: [PATCH] usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit
Older ATF does not provide SMC call for USB 3.0 phy power on functionality and therefore initialization of xhci-hcd is failing when older version of ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP.
[ 3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware [ 3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95 [ 3.123465] xhci-hcd: probe of d0058000.usb failed with error -95
This patch introduces a new plat_setup callback for xhci platform drivers which is called prior calling usb_add_hcd() function. This function at its beginning skips PHY init if hcd->skip_phy_initialization is set.
Current init_quirk callback for xhci platform drivers is called from xhci_plat_setup() function which is called after chip reset completes. It happens in the middle of the usb_add_hcd() function and therefore this callback cannot be used for setting if PHY init should be skipped or not.
For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup() function configured as a xhci platform plat_setup callback. This new function calls phy_power_on() and in case it returns -EOPNOTSUPP then XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY initialization.
This patch fixes above failure by ignoring 'not supported' error in xhci-hcd driver. In this case it is expected that phy is already power on.
It fixes initialization of xhci-hcd on Espressobin boards where is older Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power.
This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined and therefore xhci-hcd on Espressobin with older ATF started failing.
Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") Cc: stable@vger.kernel.org # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno Cc: stable@vger.kernel.org # 5.1+: f768e718911e: usb: host: xhci-plat: add priv quirk for skip PHY initialization Tested-by: Tomasz Maciej Nowak tmn505@gmail.com Tested-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com # On R-Car Reviewed-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com # xhci-plat Acked-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Pali Rohár pali@kernel.org Link: https://lore.kernel.org/r/20210201150803.7305-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c index 60651a50770f..8ca1a235d164 100644 --- a/drivers/usb/host/xhci-mvebu.c +++ b/drivers/usb/host/xhci-mvebu.c @@ -8,6 +8,7 @@ #include <linux/mbus.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/phy/phy.h>
#include <linux/usb.h> #include <linux/usb/hcd.h> @@ -74,6 +75,47 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) return 0; }
+int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct device *dev = hcd->self.controller; + struct phy *phy; + int ret; + + /* Old bindings miss the PHY handle */ + phy = of_phy_get(dev->of_node, "usb3-phy"); + if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER) + return -EPROBE_DEFER; + else if (IS_ERR(phy)) + goto phy_out; + + ret = phy_init(phy); + if (ret) + goto phy_put; + + ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS); + if (ret) + goto phy_exit; + + ret = phy_power_on(phy); + if (ret == -EOPNOTSUPP) { + /* Skip initializatin of XHCI PHY when it is unsupported by firmware */ + dev_warn(dev, "PHY unsupported by firmware\n"); + xhci->quirks |= XHCI_SKIP_PHY_INIT; + } + if (ret) + goto phy_exit; + + phy_power_off(phy); +phy_exit: + phy_exit(phy); +phy_put: + of_phy_put(phy); +phy_out: + + return 0; +} + int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h index 3be021793cc8..01bf3fcb3eca 100644 --- a/drivers/usb/host/xhci-mvebu.h +++ b/drivers/usb/host/xhci-mvebu.h @@ -12,6 +12,7 @@ struct usb_hcd;
#if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); +int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd); int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); #else static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) @@ -19,6 +20,11 @@ static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) return 0; }
+static inline int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) +{ + return 0; +} + static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) { return 0; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 4d34f6005381..c1edcc9b13ce 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -44,6 +44,16 @@ static void xhci_priv_plat_start(struct usb_hcd *hcd) priv->plat_start(hcd); }
+static int xhci_priv_plat_setup(struct usb_hcd *hcd) +{ + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); + + if (!priv->plat_setup) + return 0; + + return priv->plat_setup(hcd); +} + static int xhci_priv_init_quirk(struct usb_hcd *hcd) { struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); @@ -111,6 +121,7 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = { };
static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { + .plat_setup = xhci_mvebu_a3700_plat_setup, .init_quirk = xhci_mvebu_a3700_init_quirk, };
@@ -330,7 +341,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); xhci->shared_hcd->tpl_support = hcd->tpl_support; - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) + + if (priv) { + ret = xhci_priv_plat_setup(hcd); + if (ret) + goto disable_usb_phy; + } + + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))) hcd->skip_phy_initialization = 1;
if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK)) diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index 1fb149d1fbce..561d0b7bce09 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -13,6 +13,7 @@ struct xhci_plat_priv { const char *firmware_name; unsigned long long quirks; + int (*plat_setup)(struct usb_hcd *); void (*plat_start)(struct usb_hcd *); int (*init_quirk)(struct usb_hcd *); int (*suspend_quirk)(struct usb_hcd *);