From: Chris Chiu chiu@endlessm.com
[ Upstream commit 0eeb91ade90ce06d2fa1e2fcb55e3316b64c203c ]
The RTL8723BU has problems connecting to AP after each warm reboot. Sometimes it returns no scan result, and in most cases, it fails the authentication for unknown reason. However, it works totally fine after cold reboot.
Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE for cold reboot and warm reboot, the registers imply that the MAC is already powered and thus some procedures are skipped during driver initialization. Double checked the vendor driver, it reads the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any during initialization based on them. This commit only tells the RTL8723BU to do full initialization without checking MAC status.
Signed-off-by: Chris Chiu chiu@endlessm.com Signed-off-by: Jes Sorensen Jes.Sorensen@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 + drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 + drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 +++ 3 files changed, 5 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index ade057d868f7..5e9ce03067de 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1341,6 +1341,7 @@ struct rtl8xxxu_fileops { u8 has_s0s1:1; u8 has_tx_report:1; u8 gen2_thermal_meter:1; + u8 needs_full_init:1; u32 adda_1t_init; u32 adda_1t_path_on; u32 adda_2t_path_on_a; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index ceffe05bd65b..f3cd314d1a9c 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -1670,6 +1670,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops = { .has_s0s1 = 1, .has_tx_report = 1, .gen2_thermal_meter = 1, + .needs_full_init = 1, .adda_1t_init = 0x01c00014, .adda_1t_path_on = 0x01c00014, .adda_2t_path_on_a = 0x01c00014, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index c6c41fb962ff..361248e97568 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -3902,6 +3902,9 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) else macpower = true;
+ if (fops->needs_full_init) + macpower = false; + ret = fops->power_on(priv); if (ret < 0) { dev_warn(dev, "%s: Failed power on\n", __func__);