3.2.97-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Jim Dickerson jim.dickerson@hpe.com
commit 114ec3a6f9096d211a4aff4277793ba969a62c73 upstream.
Servers were emitting failed handoff messages but were not waiting the full 1 second as designated in section 4.22.1 of the eXtensible Host Controller Interface specifications. The handshake was using wrong units so calls were made with milliseconds not microseconds. Comments referenced 5 seconds not 1 second as in specs.
The wrong units were also corrected in a second handshake call.
Signed-off-by: Jim Dickerson jim.dickerson@hpe.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Ben Hutchings ben@decadent.org.uk --- drivers/usb/host/pci-quirks.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -866,7 +866,7 @@ EXPORT_SYMBOL_GPL(usb_disable_xhci_ports * * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS. * It signals to the BIOS that the OS wants control of the host controller, - * and then waits 5 seconds for the BIOS to hand over control. + * and then waits 1 second for the BIOS to hand over control. * If we timeout, assume the BIOS is broken and take control anyway. */ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) @@ -912,9 +912,9 @@ static void __devinit quirk_usb_handoff_ if (val & XHCI_HC_BIOS_OWNED) { writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset);
- /* Wait for 5 seconds with 10 microsecond polling interval */ + /* Wait for 1 second with 10 microsecond polling interval */ timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED, - 0, 5000, 10); + 0, 1000000, 10);
/* Assume a buggy BIOS and take HC ownership anyway */ if (timeout) { @@ -942,7 +942,7 @@ hc_init: * operational or runtime registers. Wait 5 seconds and no more. */ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0, - 5000, 10); + 5000000, 10); /* Assume a buggy HC and start HC initialization anyway */ if (timeout) { val = readl(op_reg_base + XHCI_STS_OFFSET);