6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhikai Zhai zhikai.zhai@amd.com
[ Upstream commit d3069feecdb5542604d29b59acfd1fd213bad95b ]
[WHY] In some cases the remain de-tile buffer segments will be greater than zero if we don't add the non-top pipe to calculate, at this time the override de-tile buffer size will be valid and used. But it makes the de-tile buffer segments used finally for all of pipes exceed the maximum.
[HOW] Add the non-top pipe to calculate the remain de-tile buffer segments. Don't set override size to use the average according to pipe count if the value exceed the maximum.
Reviewed-by: Charlene Liu charlene.liu@amd.com Signed-off-by: Zhikai Zhai zhikai.zhai@amd.com Signed-off-by: Tom Chung chiahsuan.chung@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../amd/display/dc/dcn315/dcn315_resource.c | 42 +++++++++---------- 1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c index 958170fbfece7..9d643c79afea6 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c @@ -1717,7 +1717,7 @@ static int dcn315_populate_dml_pipes_from_context( pipes[pipe_cnt].dout.dsc_input_bpc = 0; DC_FP_START(); dcn31_zero_pipe_dcc_fraction(pipes, pipe_cnt); - if (pixel_rate_crb && !pipe->top_pipe && !pipe->prev_odm_pipe) { + if (pixel_rate_crb) { int bpp = source_format_to_bpp(pipes[pipe_cnt].pipe.src.source_format); /* Ceil to crb segment size */ int approx_det_segs_required_for_pstate = dcn_get_approx_det_segs_required_for_pstate( @@ -1768,28 +1768,26 @@ static int dcn315_populate_dml_pipes_from_context( continue; }
- if (!pipe->top_pipe && !pipe->prev_odm_pipe) { - bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc) - || (pipe->plane_state && pipe->plane_state->src_rect.width > 5120); - - if (remaining_det_segs > MIN_RESERVED_DET_SEGS && crb_pipes != 0) - pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes + - (crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0); - if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) { - /* Clamp to 2 pipe split max det segments */ - remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override - 2 * (DCN3_15_MAX_DET_SEGS); - pipes[pipe_cnt].pipe.src.det_size_override = 2 * DCN3_15_MAX_DET_SEGS; - } - if (pipes[pipe_cnt].pipe.src.det_size_override > DCN3_15_MAX_DET_SEGS || split_required) { - /* If we are splitting we must have an even number of segments */ - remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override % 2; - pipes[pipe_cnt].pipe.src.det_size_override -= pipes[pipe_cnt].pipe.src.det_size_override % 2; - } - /* Convert segments into size for DML use */ - pipes[pipe_cnt].pipe.src.det_size_override *= DCN3_15_CRB_SEGMENT_SIZE_KB; - - crb_idx++; + bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc) + || (pipe->plane_state && pipe->plane_state->src_rect.width > 5120); + + if (remaining_det_segs > MIN_RESERVED_DET_SEGS && crb_pipes != 0) + pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes + + (crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0); + if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) { + /* Clamp to 2 pipe split max det segments */ + remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override - 2 * (DCN3_15_MAX_DET_SEGS); + pipes[pipe_cnt].pipe.src.det_size_override = 2 * DCN3_15_MAX_DET_SEGS; + } + if (pipes[pipe_cnt].pipe.src.det_size_override > DCN3_15_MAX_DET_SEGS || split_required) { + /* If we are splitting we must have an even number of segments */ + remaining_det_segs += pipes[pipe_cnt].pipe.src.det_size_override % 2; + pipes[pipe_cnt].pipe.src.det_size_override -= pipes[pipe_cnt].pipe.src.det_size_override % 2; } + /* Convert segments into size for DML use */ + pipes[pipe_cnt].pipe.src.det_size_override *= DCN3_15_CRB_SEGMENT_SIZE_KB; + + crb_idx++; pipe_cnt++; } }