From: José Roberto de Souza jose.souza@intel.com
[ Upstream commit a1b63119ee839c8ff622407aab25c9723943638a ]
intel_dp.c is a 5k lines monster, so moving DRRS out of it to reduce some lines from it.
Reviewed-by: Rodrigo Vivi rodrigo.vivi@intel.com Cc: Jani Nikula jani.nikula@intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Signed-off-by: José Roberto de Souza jose.souza@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20210827174253.51122-2-jose.so... Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/gpu/i915.rst | 14 +- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/display/intel_ddi.c | 1 + .../drm/i915/display/intel_display_debugfs.c | 1 + drivers/gpu/drm/i915/display/intel_dp.c | 467 +---------------- drivers/gpu/drm/i915/display/intel_dp.h | 11 - drivers/gpu/drm/i915/display/intel_drrs.c | 477 ++++++++++++++++++ drivers/gpu/drm/i915/display/intel_drrs.h | 32 ++ .../gpu/drm/i915/display/intel_frontbuffer.c | 1 + 9 files changed, 521 insertions(+), 484 deletions(-) create mode 100644 drivers/gpu/drm/i915/display/intel_drrs.c create mode 100644 drivers/gpu/drm/i915/display/intel_drrs.h
diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst index 204ebdaadb45a..03021dfa0dd81 100644 --- a/Documentation/gpu/i915.rst +++ b/Documentation/gpu/i915.rst @@ -183,25 +183,25 @@ Frame Buffer Compression (FBC) Display Refresh Rate Switching (DRRS) -------------------------------------
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c :doc: Display Refresh Rate Switching (DRRS)
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c :functions: intel_dp_set_drrs_state
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c :functions: intel_edp_drrs_enable
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c :functions: intel_edp_drrs_disable
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c :functions: intel_edp_drrs_invalidate
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c :functions: intel_edp_drrs_flush
-.. kernel-doc:: drivers/gpu/drm/i915/display/intel_dp.c +.. kernel-doc:: drivers/gpu/drm/i915/display/intel_drrs.c :functions: intel_dp_drrs_init
DPIO diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index a4154fe14f8c0..26cf754229451 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -212,6 +212,7 @@ i915-y += \ display/intel_dpll.o \ display/intel_dpll_mgr.o \ display/intel_dpt.o \ + display/intel_drrs.o \ display/intel_dsb.o \ display/intel_fb.o \ display/intel_fbc.o \ diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 82e5064b4ce7b..f61901e26409e 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -40,6 +40,7 @@ #include "intel_dp_link_training.h" #include "intel_dp_mst.h" #include "intel_dpio_phy.h" +#include "intel_drrs.h" #include "intel_dsi.h" #include "intel_fdi.h" #include "intel_fifo_underrun.h" diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c index 8fdacb252bb19..b136a0fc0963b 100644 --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c @@ -13,6 +13,7 @@ #include "intel_display_types.h" #include "intel_dmc.h" #include "intel_dp.h" +#include "intel_drrs.h" #include "intel_fbc.h" #include "intel_hdcp.h" #include "intel_hdmi.h" diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index d55363f1fa102..dbff4b6aa22bf 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -56,6 +56,7 @@ #include "intel_dp_mst.h" #include "intel_dpio_phy.h" #include "intel_dpll.h" +#include "intel_drrs.h" #include "intel_fifo_underrun.h" #include "intel_hdcp.h" #include "intel_hdmi.h" @@ -1610,46 +1611,6 @@ intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp, intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA); }
-static void -intel_dp_drrs_compute_config(struct intel_dp *intel_dp, - struct intel_crtc_state *pipe_config, - int output_bpp, bool constant_n) -{ - struct intel_connector *intel_connector = intel_dp->attached_connector; - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); - int pixel_clock; - - if (pipe_config->vrr.enable) - return; - - /* - * DRRS and PSR can't be enable together, so giving preference to PSR - * as it allows more power-savings by complete shutting down display, - * so to guarantee this, intel_dp_drrs_compute_config() must be called - * after intel_psr_compute_config(). - */ - if (pipe_config->has_psr) - return; - - if (!intel_connector->panel.downclock_mode || - dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT) - return; - - pipe_config->has_drrs = true; - - pixel_clock = intel_connector->panel.downclock_mode->clock; - if (pipe_config->splitter.enable) - pixel_clock /= pipe_config->splitter.link_count; - - intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock, - pipe_config->port_clock, &pipe_config->dp_m2_n2, - constant_n, pipe_config->fec_enable); - - /* FIXME: abstract this better */ - if (pipe_config->splitter.enable) - pipe_config->dp_m2_n2.gmch_m *= pipe_config->splitter.link_count; -} - int intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, @@ -4737,432 +4698,6 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect drm_connector_attach_vrr_capable_property(connector); }
-/** - * intel_dp_set_drrs_state - program registers for RR switch to take effect - * @dev_priv: i915 device - * @crtc_state: a pointer to the active intel_crtc_state - * @refresh_rate: RR to be programmed - * - * This function gets called when refresh rate (RR) has to be changed from - * one frequency to another. Switches can be between high and low RR - * supported by the panel or to any other RR based on media playback (in - * this case, RR value needs to be passed from user space). - * - * The caller of this function needs to take a lock on dev_priv->drrs. - */ -static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv, - const struct intel_crtc_state *crtc_state, - int refresh_rate) -{ - struct intel_dp *intel_dp = dev_priv->drrs.dp; - struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); - enum drrs_refresh_rate_type index = DRRS_HIGH_RR; - - if (refresh_rate <= 0) { - drm_dbg_kms(&dev_priv->drm, - "Refresh rate should be positive non-zero.\n"); - return; - } - - if (intel_dp == NULL) { - drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n"); - return; - } - - if (!crtc) { - drm_dbg_kms(&dev_priv->drm, - "DRRS: intel_crtc not initialized\n"); - return; - } - - if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) { - drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n"); - return; - } - - if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) == - refresh_rate) - index = DRRS_LOW_RR; - - if (index == dev_priv->drrs.refresh_rate_type) { - drm_dbg_kms(&dev_priv->drm, - "DRRS requested for previously set RR...ignoring\n"); - return; - } - - if (!crtc_state->hw.active) { - drm_dbg_kms(&dev_priv->drm, - "eDP encoder disabled. CRTC not Active\n"); - return; - } - - if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) { - switch (index) { - case DRRS_HIGH_RR: - intel_dp_set_m_n(crtc_state, M1_N1); - break; - case DRRS_LOW_RR: - intel_dp_set_m_n(crtc_state, M2_N2); - break; - case DRRS_MAX_RR: - default: - drm_err(&dev_priv->drm, - "Unsupported refreshrate type\n"); - } - } else if (DISPLAY_VER(dev_priv) > 6) { - i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder); - u32 val; - - val = intel_de_read(dev_priv, reg); - if (index > DRRS_HIGH_RR) { - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) - val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV; - else - val |= PIPECONF_EDP_RR_MODE_SWITCH; - } else { - if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) - val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV; - else - val &= ~PIPECONF_EDP_RR_MODE_SWITCH; - } - intel_de_write(dev_priv, reg, val); - } - - dev_priv->drrs.refresh_rate_type = index; - - drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n", - refresh_rate); -} - -static void -intel_edp_drrs_enable_locked(struct intel_dp *intel_dp) -{ - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); - - dev_priv->drrs.busy_frontbuffer_bits = 0; - dev_priv->drrs.dp = intel_dp; -} - -/** - * intel_edp_drrs_enable - init drrs struct if supported - * @intel_dp: DP struct - * @crtc_state: A pointer to the active crtc state. - * - * Initializes frontbuffer_bits and drrs.dp - */ -void intel_edp_drrs_enable(struct intel_dp *intel_dp, - const struct intel_crtc_state *crtc_state) -{ - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); - - if (!crtc_state->has_drrs) - return; - - drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n"); - - mutex_lock(&dev_priv->drrs.mutex); - - if (dev_priv->drrs.dp) { - drm_warn(&dev_priv->drm, "DRRS already enabled\n"); - goto unlock; - } - - intel_edp_drrs_enable_locked(intel_dp); - -unlock: - mutex_unlock(&dev_priv->drrs.mutex); -} - -static void -intel_edp_drrs_disable_locked(struct intel_dp *intel_dp, - const struct intel_crtc_state *crtc_state) -{ - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); - - if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) { - int refresh; - - refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode); - intel_dp_set_drrs_state(dev_priv, crtc_state, refresh); - } - - dev_priv->drrs.dp = NULL; -} - -/** - * intel_edp_drrs_disable - Disable DRRS - * @intel_dp: DP struct - * @old_crtc_state: Pointer to old crtc_state. - * - */ -void intel_edp_drrs_disable(struct intel_dp *intel_dp, - const struct intel_crtc_state *old_crtc_state) -{ - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); - - if (!old_crtc_state->has_drrs) - return; - - mutex_lock(&dev_priv->drrs.mutex); - if (!dev_priv->drrs.dp) { - mutex_unlock(&dev_priv->drrs.mutex); - return; - } - - intel_edp_drrs_disable_locked(intel_dp, old_crtc_state); - mutex_unlock(&dev_priv->drrs.mutex); - - cancel_delayed_work_sync(&dev_priv->drrs.work); -} - -/** - * intel_edp_drrs_update - Update DRRS state - * @intel_dp: Intel DP - * @crtc_state: new CRTC state - * - * This function will update DRRS states, disabling or enabling DRRS when - * executing fastsets. For full modeset, intel_edp_drrs_disable() and - * intel_edp_drrs_enable() should be called instead. - */ -void -intel_edp_drrs_update(struct intel_dp *intel_dp, - const struct intel_crtc_state *crtc_state) -{ - struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); - - if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT) - return; - - mutex_lock(&dev_priv->drrs.mutex); - - /* New state matches current one? */ - if (crtc_state->has_drrs == !!dev_priv->drrs.dp) - goto unlock; - - if (crtc_state->has_drrs) - intel_edp_drrs_enable_locked(intel_dp); - else - intel_edp_drrs_disable_locked(intel_dp, crtc_state); - -unlock: - mutex_unlock(&dev_priv->drrs.mutex); -} - -static void intel_edp_drrs_downclock_work(struct work_struct *work) -{ - struct drm_i915_private *dev_priv = - container_of(work, typeof(*dev_priv), drrs.work.work); - struct intel_dp *intel_dp; - - mutex_lock(&dev_priv->drrs.mutex); - - intel_dp = dev_priv->drrs.dp; - - if (!intel_dp) - goto unlock; - - /* - * The delayed work can race with an invalidate hence we need to - * recheck. - */ - - if (dev_priv->drrs.busy_frontbuffer_bits) - goto unlock; - - if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) { - struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc; - - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, - drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode)); - } - -unlock: - mutex_unlock(&dev_priv->drrs.mutex); -} - -/** - * intel_edp_drrs_invalidate - Disable Idleness DRRS - * @dev_priv: i915 device - * @frontbuffer_bits: frontbuffer plane tracking bits - * - * This function gets called everytime rendering on the given planes start. - * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR). - * - * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits. - */ -void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv, - unsigned int frontbuffer_bits) -{ - struct intel_dp *intel_dp; - struct drm_crtc *crtc; - enum pipe pipe; - - if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED) - return; - - cancel_delayed_work(&dev_priv->drrs.work); - - mutex_lock(&dev_priv->drrs.mutex); - - intel_dp = dev_priv->drrs.dp; - if (!intel_dp) { - mutex_unlock(&dev_priv->drrs.mutex); - return; - } - - crtc = dp_to_dig_port(intel_dp)->base.base.crtc; - pipe = to_intel_crtc(crtc)->pipe; - - frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); - dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits; - - /* invalidate means busy screen hence upclock */ - if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, - drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); - - mutex_unlock(&dev_priv->drrs.mutex); -} - -/** - * intel_edp_drrs_flush - Restart Idleness DRRS - * @dev_priv: i915 device - * @frontbuffer_bits: frontbuffer plane tracking bits - * - * This function gets called every time rendering on the given planes has - * completed or flip on a crtc is completed. So DRRS should be upclocked - * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again, - * if no other planes are dirty. - * - * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits. - */ -void intel_edp_drrs_flush(struct drm_i915_private *dev_priv, - unsigned int frontbuffer_bits) -{ - struct intel_dp *intel_dp; - struct drm_crtc *crtc; - enum pipe pipe; - - if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED) - return; - - cancel_delayed_work(&dev_priv->drrs.work); - - mutex_lock(&dev_priv->drrs.mutex); - - intel_dp = dev_priv->drrs.dp; - if (!intel_dp) { - mutex_unlock(&dev_priv->drrs.mutex); - return; - } - - crtc = dp_to_dig_port(intel_dp)->base.base.crtc; - pipe = to_intel_crtc(crtc)->pipe; - - frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); - dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits; - - /* flush means busy screen hence upclock */ - if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) - intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, - drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); - - /* - * flush also means no more activity hence schedule downclock, if all - * other fbs are quiescent too - */ - if (!dev_priv->drrs.busy_frontbuffer_bits) - schedule_delayed_work(&dev_priv->drrs.work, - msecs_to_jiffies(1000)); - mutex_unlock(&dev_priv->drrs.mutex); -} - -/** - * DOC: Display Refresh Rate Switching (DRRS) - * - * Display Refresh Rate Switching (DRRS) is a power conservation feature - * which enables swtching between low and high refresh rates, - * dynamically, based on the usage scenario. This feature is applicable - * for internal panels. - * - * Indication that the panel supports DRRS is given by the panel EDID, which - * would list multiple refresh rates for one resolution. - * - * DRRS is of 2 types - static and seamless. - * Static DRRS involves changing refresh rate (RR) by doing a full modeset - * (may appear as a blink on screen) and is used in dock-undock scenario. - * Seamless DRRS involves changing RR without any visual effect to the user - * and can be used during normal system usage. This is done by programming - * certain registers. - * - * Support for static/seamless DRRS may be indicated in the VBT based on - * inputs from the panel spec. - * - * DRRS saves power by switching to low RR based on usage scenarios. - * - * The implementation is based on frontbuffer tracking implementation. When - * there is a disturbance on the screen triggered by user activity or a periodic - * system activity, DRRS is disabled (RR is changed to high RR). When there is - * no movement on screen, after a timeout of 1 second, a switch to low RR is - * made. - * - * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate() - * and intel_edp_drrs_flush() are called. - * - * DRRS can be further extended to support other internal panels and also - * the scenario of video playback wherein RR is set based on the rate - * requested by userspace. - */ - -/** - * intel_dp_drrs_init - Init basic DRRS work and mutex. - * @connector: eDP connector - * @fixed_mode: preferred mode of panel - * - * This function is called only once at driver load to initialize basic - * DRRS stuff. - * - * Returns: - * Downclock mode if panel supports it, else return NULL. - * DRRS support is determined by the presence of downclock mode (apart - * from VBT setting). - */ -static struct drm_display_mode * -intel_dp_drrs_init(struct intel_connector *connector, - struct drm_display_mode *fixed_mode) -{ - struct drm_i915_private *dev_priv = to_i915(connector->base.dev); - struct drm_display_mode *downclock_mode = NULL; - - INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work); - mutex_init(&dev_priv->drrs.mutex); - - if (DISPLAY_VER(dev_priv) <= 6) { - drm_dbg_kms(&dev_priv->drm, - "DRRS supported for Gen7 and above\n"); - return NULL; - } - - if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) { - drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n"); - return NULL; - } - - downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode); - if (!downclock_mode) { - drm_dbg_kms(&dev_priv->drm, - "Downclock mode is not found. DRRS not supported\n"); - return NULL; - } - - dev_priv->drrs.type = dev_priv->vbt.drrs_type; - - dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR; - drm_dbg_kms(&dev_priv->drm, - "seamless DRRS supported for eDP panel.\n"); - return downclock_mode; -} - static bool intel_edp_init_connector(struct intel_dp *intel_dp, struct intel_connector *intel_connector) { diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h index 2121aaa9b8db0..3dd6ebc2f6b14 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.h +++ b/drivers/gpu/drm/i915/display/intel_dp.h @@ -70,17 +70,6 @@ int intel_dp_max_link_rate(struct intel_dp *intel_dp); int intel_dp_max_lane_count(struct intel_dp *intel_dp); int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
-void intel_edp_drrs_enable(struct intel_dp *intel_dp, - const struct intel_crtc_state *crtc_state); -void intel_edp_drrs_disable(struct intel_dp *intel_dp, - const struct intel_crtc_state *crtc_state); -void intel_edp_drrs_update(struct intel_dp *intel_dp, - const struct intel_crtc_state *crtc_state); -void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv, - unsigned int frontbuffer_bits); -void intel_edp_drrs_flush(struct drm_i915_private *dev_priv, - unsigned int frontbuffer_bits); - void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock, u8 *link_bw, u8 *rate_select); bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp); diff --git a/drivers/gpu/drm/i915/display/intel_drrs.c b/drivers/gpu/drm/i915/display/intel_drrs.c new file mode 100644 index 0000000000000..be9b6d4482f04 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_drrs.c @@ -0,0 +1,477 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2021 Intel Corporation + */ + +#include "i915_drv.h" +#include "intel_atomic.h" +#include "intel_de.h" +#include "intel_display_types.h" +#include "intel_drrs.h" +#include "intel_panel.h" + +/** + * DOC: Display Refresh Rate Switching (DRRS) + * + * Display Refresh Rate Switching (DRRS) is a power conservation feature + * which enables swtching between low and high refresh rates, + * dynamically, based on the usage scenario. This feature is applicable + * for internal panels. + * + * Indication that the panel supports DRRS is given by the panel EDID, which + * would list multiple refresh rates for one resolution. + * + * DRRS is of 2 types - static and seamless. + * Static DRRS involves changing refresh rate (RR) by doing a full modeset + * (may appear as a blink on screen) and is used in dock-undock scenario. + * Seamless DRRS involves changing RR without any visual effect to the user + * and can be used during normal system usage. This is done by programming + * certain registers. + * + * Support for static/seamless DRRS may be indicated in the VBT based on + * inputs from the panel spec. + * + * DRRS saves power by switching to low RR based on usage scenarios. + * + * The implementation is based on frontbuffer tracking implementation. When + * there is a disturbance on the screen triggered by user activity or a periodic + * system activity, DRRS is disabled (RR is changed to high RR). When there is + * no movement on screen, after a timeout of 1 second, a switch to low RR is + * made. + * + * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate() + * and intel_edp_drrs_flush() are called. + * + * DRRS can be further extended to support other internal panels and also + * the scenario of video playback wherein RR is set based on the rate + * requested by userspace. + */ + +void +intel_dp_drrs_compute_config(struct intel_dp *intel_dp, + struct intel_crtc_state *pipe_config, + int output_bpp, bool constant_n) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + int pixel_clock; + + if (pipe_config->vrr.enable) + return; + + /* + * DRRS and PSR can't be enable together, so giving preference to PSR + * as it allows more power-savings by complete shutting down display, + * so to guarantee this, intel_dp_drrs_compute_config() must be called + * after intel_psr_compute_config(). + */ + if (pipe_config->has_psr) + return; + + if (!intel_connector->panel.downclock_mode || + dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT) + return; + + pipe_config->has_drrs = true; + + pixel_clock = intel_connector->panel.downclock_mode->clock; + if (pipe_config->splitter.enable) + pixel_clock /= pipe_config->splitter.link_count; + + intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock, + pipe_config->port_clock, &pipe_config->dp_m2_n2, + constant_n, pipe_config->fec_enable); + + /* FIXME: abstract this better */ + if (pipe_config->splitter.enable) + pipe_config->dp_m2_n2.gmch_m *= pipe_config->splitter.link_count; +} + +/** + * intel_dp_set_drrs_state - program registers for RR switch to take effect + * @dev_priv: i915 device + * @crtc_state: a pointer to the active intel_crtc_state + * @refresh_rate: RR to be programmed + * + * This function gets called when refresh rate (RR) has to be changed from + * one frequency to another. Switches can be between high and low RR + * supported by the panel or to any other RR based on media playback (in + * this case, RR value needs to be passed from user space). + * + * The caller of this function needs to take a lock on dev_priv->drrs. + */ +static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv, + const struct intel_crtc_state *crtc_state, + int refresh_rate) +{ + struct intel_dp *intel_dp = dev_priv->drrs.dp; + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + enum drrs_refresh_rate_type index = DRRS_HIGH_RR; + + if (refresh_rate <= 0) { + drm_dbg_kms(&dev_priv->drm, + "Refresh rate should be positive non-zero.\n"); + return; + } + + if (intel_dp == NULL) { + drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n"); + return; + } + + if (!crtc) { + drm_dbg_kms(&dev_priv->drm, + "DRRS: intel_crtc not initialized\n"); + return; + } + + if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) { + drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n"); + return; + } + + if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) == + refresh_rate) + index = DRRS_LOW_RR; + + if (index == dev_priv->drrs.refresh_rate_type) { + drm_dbg_kms(&dev_priv->drm, + "DRRS requested for previously set RR...ignoring\n"); + return; + } + + if (!crtc_state->hw.active) { + drm_dbg_kms(&dev_priv->drm, + "eDP encoder disabled. CRTC not Active\n"); + return; + } + + if (DISPLAY_VER(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) { + switch (index) { + case DRRS_HIGH_RR: + intel_dp_set_m_n(crtc_state, M1_N1); + break; + case DRRS_LOW_RR: + intel_dp_set_m_n(crtc_state, M2_N2); + break; + case DRRS_MAX_RR: + default: + drm_err(&dev_priv->drm, + "Unsupported refreshrate type\n"); + } + } else if (DISPLAY_VER(dev_priv) > 6) { + i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder); + u32 val; + + val = intel_de_read(dev_priv, reg); + if (index > DRRS_HIGH_RR) { + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV; + else + val |= PIPECONF_EDP_RR_MODE_SWITCH; + } else { + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV; + else + val &= ~PIPECONF_EDP_RR_MODE_SWITCH; + } + intel_de_write(dev_priv, reg, val); + } + + dev_priv->drrs.refresh_rate_type = index; + + drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n", + refresh_rate); +} + +static void +intel_edp_drrs_enable_locked(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + dev_priv->drrs.busy_frontbuffer_bits = 0; + dev_priv->drrs.dp = intel_dp; +} + +/** + * intel_edp_drrs_enable - init drrs struct if supported + * @intel_dp: DP struct + * @crtc_state: A pointer to the active crtc state. + * + * Initializes frontbuffer_bits and drrs.dp + */ +void intel_edp_drrs_enable(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (!crtc_state->has_drrs) + return; + + drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n"); + + mutex_lock(&dev_priv->drrs.mutex); + + if (dev_priv->drrs.dp) { + drm_warn(&dev_priv->drm, "DRRS already enabled\n"); + goto unlock; + } + + intel_edp_drrs_enable_locked(intel_dp); + +unlock: + mutex_unlock(&dev_priv->drrs.mutex); +} + +static void +intel_edp_drrs_disable_locked(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) { + int refresh; + + refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode); + intel_dp_set_drrs_state(dev_priv, crtc_state, refresh); + } + + dev_priv->drrs.dp = NULL; +} + +/** + * intel_edp_drrs_disable - Disable DRRS + * @intel_dp: DP struct + * @old_crtc_state: Pointer to old crtc_state. + * + */ +void intel_edp_drrs_disable(struct intel_dp *intel_dp, + const struct intel_crtc_state *old_crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (!old_crtc_state->has_drrs) + return; + + mutex_lock(&dev_priv->drrs.mutex); + if (!dev_priv->drrs.dp) { + mutex_unlock(&dev_priv->drrs.mutex); + return; + } + + intel_edp_drrs_disable_locked(intel_dp, old_crtc_state); + mutex_unlock(&dev_priv->drrs.mutex); + + cancel_delayed_work_sync(&dev_priv->drrs.work); +} + +/** + * intel_edp_drrs_update - Update DRRS state + * @intel_dp: Intel DP + * @crtc_state: new CRTC state + * + * This function will update DRRS states, disabling or enabling DRRS when + * executing fastsets. For full modeset, intel_edp_drrs_disable() and + * intel_edp_drrs_enable() should be called instead. + */ +void +intel_edp_drrs_update(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT) + return; + + mutex_lock(&dev_priv->drrs.mutex); + + /* New state matches current one? */ + if (crtc_state->has_drrs == !!dev_priv->drrs.dp) + goto unlock; + + if (crtc_state->has_drrs) + intel_edp_drrs_enable_locked(intel_dp); + else + intel_edp_drrs_disable_locked(intel_dp, crtc_state); + +unlock: + mutex_unlock(&dev_priv->drrs.mutex); +} + +static void intel_edp_drrs_downclock_work(struct work_struct *work) +{ + struct drm_i915_private *dev_priv = + container_of(work, typeof(*dev_priv), drrs.work.work); + struct intel_dp *intel_dp; + + mutex_lock(&dev_priv->drrs.mutex); + + intel_dp = dev_priv->drrs.dp; + + if (!intel_dp) + goto unlock; + + /* + * The delayed work can race with an invalidate hence we need to + * recheck. + */ + + if (dev_priv->drrs.busy_frontbuffer_bits) + goto unlock; + + if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) { + struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc; + + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, + drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode)); + } + +unlock: + mutex_unlock(&dev_priv->drrs.mutex); +} + +/** + * intel_edp_drrs_invalidate - Disable Idleness DRRS + * @dev_priv: i915 device + * @frontbuffer_bits: frontbuffer plane tracking bits + * + * This function gets called everytime rendering on the given planes start. + * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR). + * + * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits. + */ +void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv, + unsigned int frontbuffer_bits) +{ + struct intel_dp *intel_dp; + struct drm_crtc *crtc; + enum pipe pipe; + + if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED) + return; + + cancel_delayed_work(&dev_priv->drrs.work); + + mutex_lock(&dev_priv->drrs.mutex); + + intel_dp = dev_priv->drrs.dp; + if (!intel_dp) { + mutex_unlock(&dev_priv->drrs.mutex); + return; + } + + crtc = dp_to_dig_port(intel_dp)->base.base.crtc; + pipe = to_intel_crtc(crtc)->pipe; + + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); + dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits; + + /* invalidate means busy screen hence upclock */ + if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); + + mutex_unlock(&dev_priv->drrs.mutex); +} + +/** + * intel_edp_drrs_flush - Restart Idleness DRRS + * @dev_priv: i915 device + * @frontbuffer_bits: frontbuffer plane tracking bits + * + * This function gets called every time rendering on the given planes has + * completed or flip on a crtc is completed. So DRRS should be upclocked + * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again, + * if no other planes are dirty. + * + * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits. + */ +void intel_edp_drrs_flush(struct drm_i915_private *dev_priv, + unsigned int frontbuffer_bits) +{ + struct intel_dp *intel_dp; + struct drm_crtc *crtc; + enum pipe pipe; + + if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED) + return; + + cancel_delayed_work(&dev_priv->drrs.work); + + mutex_lock(&dev_priv->drrs.mutex); + + intel_dp = dev_priv->drrs.dp; + if (!intel_dp) { + mutex_unlock(&dev_priv->drrs.mutex); + return; + } + + crtc = dp_to_dig_port(intel_dp)->base.base.crtc; + pipe = to_intel_crtc(crtc)->pipe; + + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); + dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits; + + /* flush means busy screen hence upclock */ + if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); + + /* + * flush also means no more activity hence schedule downclock, if all + * other fbs are quiescent too + */ + if (!dev_priv->drrs.busy_frontbuffer_bits) + schedule_delayed_work(&dev_priv->drrs.work, + msecs_to_jiffies(1000)); + mutex_unlock(&dev_priv->drrs.mutex); +} + +/** + * intel_dp_drrs_init - Init basic DRRS work and mutex. + * @connector: eDP connector + * @fixed_mode: preferred mode of panel + * + * This function is called only once at driver load to initialize basic + * DRRS stuff. + * + * Returns: + * Downclock mode if panel supports it, else return NULL. + * DRRS support is determined by the presence of downclock mode (apart + * from VBT setting). + */ +struct drm_display_mode * +intel_dp_drrs_init(struct intel_connector *connector, + struct drm_display_mode *fixed_mode) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct drm_display_mode *downclock_mode = NULL; + + INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work); + mutex_init(&dev_priv->drrs.mutex); + + if (DISPLAY_VER(dev_priv) <= 6) { + drm_dbg_kms(&dev_priv->drm, + "DRRS supported for Gen7 and above\n"); + return NULL; + } + + if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) { + drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n"); + return NULL; + } + + downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode); + if (!downclock_mode) { + drm_dbg_kms(&dev_priv->drm, + "Downclock mode is not found. DRRS not supported\n"); + return NULL; + } + + dev_priv->drrs.type = dev_priv->vbt.drrs_type; + + dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR; + drm_dbg_kms(&dev_priv->drm, + "seamless DRRS supported for eDP panel.\n"); + return downclock_mode; +} diff --git a/drivers/gpu/drm/i915/display/intel_drrs.h b/drivers/gpu/drm/i915/display/intel_drrs.h new file mode 100644 index 0000000000000..ffa175b4cf4f4 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_drrs.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: MIT */ +/* + * Copyright © 2021 Intel Corporation + */ + +#ifndef __INTEL_DRRS_H__ +#define __INTEL_DRRS_H__ + +#include <linux/types.h> + +struct drm_i915_private; +struct intel_crtc_state; +struct intel_connector; +struct intel_dp; + +void intel_edp_drrs_enable(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state); +void intel_edp_drrs_disable(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state); +void intel_edp_drrs_update(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state); +void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv, + unsigned int frontbuffer_bits); +void intel_edp_drrs_flush(struct drm_i915_private *dev_priv, + unsigned int frontbuffer_bits); +void intel_dp_drrs_compute_config(struct intel_dp *intel_dp, + struct intel_crtc_state *pipe_config, + int output_bpp, bool constant_n); +struct drm_display_mode *intel_dp_drrs_init(struct intel_connector *connector, + struct drm_display_mode *fixed_mode); + +#endif /* __INTEL_DRRS_H__ */ diff --git a/drivers/gpu/drm/i915/display/intel_frontbuffer.c b/drivers/gpu/drm/i915/display/intel_frontbuffer.c index 8e75debcce1a9..e4834d84ce5e3 100644 --- a/drivers/gpu/drm/i915/display/intel_frontbuffer.c +++ b/drivers/gpu/drm/i915/display/intel_frontbuffer.c @@ -62,6 +62,7 @@ #include "intel_display_types.h" #include "intel_fbc.h" #include "intel_frontbuffer.h" +#include "intel_drrs.h" #include "intel_psr.h"
/**