6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacob Keller jacob.e.keller@intel.com
[ Upstream commit 0aacec49c29e7c5b1487e859b0c0a42388c34092 ]
The ice hardware has a synchronization mechanism used to drive the simultaneous application of commands on both PHY ports and the source timer in the MAC.
When issuing a sync via ice_ptp_exec_tmr_cmd(), the hardware will simultaneously apply the commands programmed for the main timer and each PHY port. Neither the main timer command register, nor the PHY port command registers auto clear on command execution.
During the execution of a timer command intended for a single port on E822 devices, such as those used to configure a PHY during link up, the driver is not correctly clearing the previous commands.
This results in unintentionally executing the last programmed command on the main timer and other PHY ports whenever performing reconfiguration on E822 ports after link up. This results in unintended side effects on other timers, depending on what command was previously programmed.
To fix this, the driver must ensure that the main timer and all other PHY ports are properly initialized to perform no action.
The enumeration for timer commands does not include an enumeration value for doing nothing. Introduce ICE_PTP_NOP for this purpose. When writing a timer command to hardware, leave the command bits set to zero which indicates that no operation should be performed on that port.
Modify ice_ptp_one_port_cmd() to always initialize all ports. For all ports other than the one being configured, write their timer command register to ICE_PTP_NOP. This ensures that no side effect happens on the timer command.
To fix this for the PHY ports, modify ice_ptp_one_port_cmd() to always initialize all other ports to ICE_PTP_NOP. This ensures that no side effects happen on the other ports.
Call ice_ptp_src_cmd() with a command value if ICE_PTP_NOP in ice_sync_phy_timer_e822() and ice_start_phy_timer_e822().
With both of these changes, the driver should no longer execute a stale command on the main timer or another PHY port when reconfiguring one of the PHY ports after link up.
Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Signed-off-by: Siddaraju DH siddaraju.dh@intel.com Signed-off-by: Jacob Keller jacob.e.keller@intel.com Tested-by: Sunitha Mekala sunithax.d.mekala@intel.com (A Contingent worker at Intel) Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Reviewed-by: Simon Horman horms@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 55 +++++++++++++++++++-- drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 3 +- 2 files changed, 52 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c index 772b1f566d6ed..813acd6a4b469 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c @@ -131,6 +131,8 @@ static void ice_ptp_src_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) case READ_TIME: cmd_val |= GLTSYN_CMD_READ_TIME; break; + case ICE_PTP_NOP: + break; }
wr32(hw, GLTSYN_CMD, cmd_val); @@ -1200,18 +1202,18 @@ ice_ptp_read_port_capture(struct ice_hw *hw, u8 port, u64 *tx_ts, u64 *rx_ts) }
/** - * ice_ptp_one_port_cmd - Prepare a single PHY port for a timer command + * ice_ptp_write_port_cmd_e822 - Prepare a single PHY port for a timer command * @hw: pointer to HW struct * @port: Port to which cmd has to be sent * @cmd: Command to be sent to the port * * Prepare the requested port for an upcoming timer sync command. * - * Note there is no equivalent of this operation on E810, as that device - * always handles all external PHYs internally. + * Do not use this function directly. If you want to configure exactly one + * port, use ice_ptp_one_port_cmd() instead. */ static int -ice_ptp_one_port_cmd(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd) +ice_ptp_write_port_cmd_e822(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd) { u32 cmd_val, val; u8 tmr_idx; @@ -1235,6 +1237,8 @@ ice_ptp_one_port_cmd(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd) case ADJ_TIME_AT_TIME: cmd_val |= PHY_CMD_ADJ_TIME_AT_TIME; break; + case ICE_PTP_NOP: + break; }
/* Tx case */ @@ -1280,6 +1284,39 @@ ice_ptp_one_port_cmd(struct ice_hw *hw, u8 port, enum ice_ptp_tmr_cmd cmd) return 0; }
+/** + * ice_ptp_one_port_cmd - Prepare one port for a timer command + * @hw: pointer to the HW struct + * @configured_port: the port to configure with configured_cmd + * @configured_cmd: timer command to prepare on the configured_port + * + * Prepare the configured_port for the configured_cmd, and prepare all other + * ports for ICE_PTP_NOP. This causes the configured_port to execute the + * desired command while all other ports perform no operation. + */ +static int +ice_ptp_one_port_cmd(struct ice_hw *hw, u8 configured_port, + enum ice_ptp_tmr_cmd configured_cmd) +{ + u8 port; + + for (port = 0; port < ICE_NUM_EXTERNAL_PORTS; port++) { + enum ice_ptp_tmr_cmd cmd; + int err; + + if (port == configured_port) + cmd = configured_cmd; + else + cmd = ICE_PTP_NOP; + + err = ice_ptp_write_port_cmd_e822(hw, port, cmd); + if (err) + return err; + } + + return 0; +} + /** * ice_ptp_port_cmd_e822 - Prepare all ports for a timer command * @hw: pointer to the HW struct @@ -1296,7 +1333,7 @@ ice_ptp_port_cmd_e822(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) for (port = 0; port < ICE_NUM_EXTERNAL_PORTS; port++) { int err;
- err = ice_ptp_one_port_cmd(hw, port, cmd); + err = ice_ptp_write_port_cmd_e822(hw, port, cmd); if (err) return err; } @@ -2245,6 +2282,9 @@ static int ice_sync_phy_timer_e822(struct ice_hw *hw, u8 port) if (err) goto err_unlock;
+ /* Do not perform any action on the main timer */ + ice_ptp_src_cmd(hw, ICE_PTP_NOP); + /* Issue the sync to activate the time adjustment */ ice_ptp_exec_tmr_cmd(hw);
@@ -2371,6 +2411,9 @@ ice_start_phy_timer_e822(struct ice_hw *hw, u8 port, bool bypass) if (err) return err;
+ /* Do not perform any action on the main timer */ + ice_ptp_src_cmd(hw, ICE_PTP_NOP); + ice_ptp_exec_tmr_cmd(hw);
err = ice_read_phy_reg_e822(hw, port, P_REG_PS, &val); @@ -2914,6 +2957,8 @@ static int ice_ptp_port_cmd_e810(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd) case ADJ_TIME_AT_TIME: cmd_val = GLTSYN_CMD_ADJ_INIT_TIME; break; + case ICE_PTP_NOP: + return 0; }
/* Read, modify, write */ diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h index 2bda64c76abc3..071f545aa85e8 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h @@ -9,7 +9,8 @@ enum ice_ptp_tmr_cmd { INIT_INCVAL, ADJ_TIME, ADJ_TIME_AT_TIME, - READ_TIME + READ_TIME, + ICE_PTP_NOP, };
enum ice_ptp_serdes {