6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Walle mwalle@kernel.org
[ Upstream commit edfea889a049abe80f0d55c0365bf60fbade272f ]
The PHY reset line is connected to both the SoC (GPIO1_25) and the CPLD. We must not use the GPIO1_25 as it will drive against the output buffer of the CPLD. Instead there is another GPIO (GPIO2_01), an input to the CPLD, which will tell the CPLD to assert the PHY reset line.
Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node") Signed-off-by: Michael Walle mwalle@kernel.org Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index d8c1dfb8c9abb..d6c049b9a9c69 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -269,7 +269,7 @@ mdio { ethphy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; }; }; @@ -516,7 +516,7 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 /* RST_GBE0_PHY# */ >; };