[ Upstream commit 612eb1c3b9e504de24136c947ed7c07bc342f3aa ]
This reverts commit 3a55402c93877d291b0a612d25edb03d1b4b93ac.
This is not a good solution when connecting to an external switch that may not support the isolation of the TXC signal resulting in output driver contention on the pin.
A different solution is necessary.
Signed-off-by: Doug Berger opendmb@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net [Adjusted to accommodate lack of commit 4f8d81b77e66] Signed-off-by: Doug Berger opendmb@gmail.com --- .../net/ethernet/broadcom/genet/bcmgenet.c | 2 ++ drivers/net/ethernet/broadcom/genet/bcmmii.c | 33 ------------------- 2 files changed, 2 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 380bf7a328ba..2afd056056fb 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2015,6 +2015,8 @@ static void reset_umac(struct bcmgenet_priv *priv)
/* issue soft reset with (rg)mii loopback to ensure a stable rxclk */ bcmgenet_umac_writel(priv, CMD_SW_RESET | CMD_LCL_LOOP_EN, UMAC_CMD); + udelay(2); + bcmgenet_umac_writel(priv, 0, UMAC_CMD); }
static void bcmgenet_intr_disable(struct bcmgenet_priv *priv) diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 026f00ccaa0c..213434aaf07f 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -187,38 +187,8 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) const char *phy_name = NULL; u32 id_mode_dis = 0; u32 port_ctrl; - int bmcr = -1; - int ret; u32 reg;
- /* MAC clocking workaround during reset of umac state machines */ - reg = bcmgenet_umac_readl(priv, UMAC_CMD); - if (reg & CMD_SW_RESET) { - /* An MII PHY must be isolated to prevent TXC contention */ - if (priv->phy_interface == PHY_INTERFACE_MODE_MII) { - ret = phy_read(phydev, MII_BMCR); - if (ret >= 0) { - bmcr = ret; - ret = phy_write(phydev, MII_BMCR, - bmcr | BMCR_ISOLATE); - } - if (ret) { - netdev_err(dev, "failed to isolate PHY\n"); - return ret; - } - } - /* Switch MAC clocking to RGMII generated clock */ - bcmgenet_sys_writel(priv, PORT_MODE_EXT_GPHY, SYS_PORT_CTRL); - /* Ensure 5 clks with Rx disabled - * followed by 5 clks with Reset asserted - */ - udelay(4); - reg &= ~(CMD_SW_RESET | CMD_LCL_LOOP_EN); - bcmgenet_umac_writel(priv, reg, UMAC_CMD); - /* Ensure 5 more clocks before Rx is enabled */ - udelay(2); - } - priv->ext_phy = !priv->internal_phy && (priv->phy_interface != PHY_INTERFACE_MODE_MOCA);
@@ -250,9 +220,6 @@ int bcmgenet_mii_config(struct net_device *dev, bool init) phy_set_max_speed(phydev, SPEED_100); bcmgenet_sys_writel(priv, PORT_MODE_EXT_EPHY, SYS_PORT_CTRL); - /* Restore the MII PHY after isolation */ - if (bmcr >= 0) - phy_write(phydev, MII_BMCR, bmcr); break;
case PHY_INTERFACE_MODE_REVMII: