From: Mathias Nyman mathias.nyman@linux.intel.com
[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]
This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.
That commit effectively disabled Intel host initiated U1/U2 lpm for devices with periodic endpoints.
Before that commit we disabled host initiated U1/U2 lpm if the exit latency was larger than any periodic endpoint service interval, this is according to xhci spec xhci 1.1 specification section 4.23.5.2
After that commit we incorrectly checked that service interval was smaller than U1/U2 inactivity timeout. This is not relevant, and can't happen for Intel hosts as previously set U1/U2 timeout = 105% * service interval.
Patch claimed it solved cases where devices can't be enumerated because of bandwidth issues. This might be true but it's a side effect of accidentally turning off lpm.
exit latency calculations have been revised since then
Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/xhci.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 9248ce8d09a4..cb21add9d7be 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4705,19 +4705,19 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns;
- if (xhci->quirks & XHCI_INTEL_HOST) - timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); - else - timeout_ns = udev->u1_params.sel; - /* Prevent U1 if service interval is shorter than U1 exit latency */ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { - if (xhci_service_interval_to_ns(desc) <= timeout_ns) { + if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) { dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n"); return USB3_LPM_DISABLED; } }
+ if (xhci->quirks & XHCI_INTEL_HOST) + timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); + else + timeout_ns = udev->u1_params.sel; + /* The U1 timeout is encoded in 1us intervals. * Don't return a timeout of zero, because that's USB3_LPM_DISABLED. */ @@ -4769,19 +4769,19 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns;
- if (xhci->quirks & XHCI_INTEL_HOST) - timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); - else - timeout_ns = udev->u2_params.sel; - /* Prevent U2 if service interval is shorter than U2 exit latency */ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { - if (xhci_service_interval_to_ns(desc) <= timeout_ns) { + if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) { dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n"); return USB3_LPM_DISABLED; } }
+ if (xhci->quirks & XHCI_INTEL_HOST) + timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); + else + timeout_ns = udev->u2_params.sel; + /* The U2 timeout is encoded in 256us intervals */ timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000); /* If the necessary timeout value is bigger than what we can set in the