From: James Smart jsmart2021@gmail.com
[ Upstream commit 359e10f087dbb7b9c9f3035a8cc4391af45bd651 ]
After exchanging PLOGI on an SLI-3 adapter, the PRLI exchange failed. Link trace showed the port was assigned a non-zero n_port_id, but didn't use the address on the PRLI. The assigned address is set on the port by the CONFIG_LINK mailbox command. The driver responded to the PRLI before the mailbox command completed. Thus the PRLI response used the old n_port_id.
Defer the PRLI response until CONFIG_LINK completes.
Link: https://lore.kernel.org/r/20190922035906.10977-2-jsmart2021@gmail.com Signed-off-by: Dick Kennedy dick.kennedy@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_nportdisc.c | 141 +++++++++++++++++++++++------ 1 file changed, 115 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 6961713825585..2a340624bfc99 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -279,6 +279,55 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) lpfc_cancel_retry_delay_tmo(phba->pport, ndlp); }
+/* lpfc_defer_pt2pt_acc - Complete SLI3 pt2pt processing on link up + * @phba: pointer to lpfc hba data structure. + * @link_mbox: pointer to CONFIG_LINK mailbox object + * + * This routine is only called if we are SLI3, direct connect pt2pt + * mode and the remote NPort issues the PLOGI after link up. + */ +void +lpfc_defer_pt2pt_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *link_mbox) +{ + LPFC_MBOXQ_t *login_mbox; + MAILBOX_t *mb = &link_mbox->u.mb; + struct lpfc_iocbq *save_iocb; + struct lpfc_nodelist *ndlp; + int rc; + + ndlp = link_mbox->ctx_ndlp; + login_mbox = link_mbox->context3; + save_iocb = login_mbox->context3; + link_mbox->context3 = NULL; + login_mbox->context3 = NULL; + + /* Check for CONFIG_LINK error */ + if (mb->mbxStatus) { + lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, + "4575 CONFIG_LINK fails pt2pt discovery: %x\n", + mb->mbxStatus); + mempool_free(login_mbox, phba->mbox_mem_pool); + mempool_free(link_mbox, phba->mbox_mem_pool); + lpfc_sli_release_iocbq(phba, save_iocb); + return; + } + + /* Now that CONFIG_LINK completed, and our SID is configured, + * we can now proceed with sending the PLOGI ACC. + */ + rc = lpfc_els_rsp_acc(link_mbox->vport, ELS_CMD_PLOGI, + save_iocb, ndlp, login_mbox); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, + "4576 PLOGI ACC fails pt2pt discovery: %x\n", + rc); + mempool_free(login_mbox, phba->mbox_mem_pool); + } + + mempool_free(link_mbox, phba->mbox_mem_pool); + lpfc_sli_release_iocbq(phba, save_iocb); +} + static int lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct lpfc_iocbq *cmdiocb) @@ -291,10 +340,12 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, IOCB_t *icmd; struct serv_parm *sp; uint32_t ed_tov; - LPFC_MBOXQ_t *mbox; + LPFC_MBOXQ_t *link_mbox; + LPFC_MBOXQ_t *login_mbox; + struct lpfc_iocbq *save_iocb; struct ls_rjt stat; uint32_t vid, flag; - int rc; + int rc, defer_acc;
memset(&stat, 0, sizeof (struct ls_rjt)); pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; @@ -343,6 +394,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, else ndlp->nlp_fcp_info |= CLASS3;
+ defer_acc = 0; ndlp->nlp_class_sup = 0; if (sp->cls1.classValid) ndlp->nlp_class_sup |= FC_COS_CLASS1; @@ -354,7 +406,6 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_class_sup |= FC_COS_CLASS4; ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) | sp->cmn.bbRcvSizeLsb; - /* if already logged in, do implicit logout */ switch (ndlp->nlp_state) { case NLP_STE_NPR_NODE: @@ -396,6 +447,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_fcp_info &= ~NLP_FCP_2_DEVICE; ndlp->nlp_flag &= ~NLP_FIRSTBURST;
+ login_mbox = NULL; + link_mbox = NULL; + save_iocb = NULL; + /* Check for Nport to NPort pt2pt protocol */ if ((vport->fc_flag & FC_PT2PT) && !(vport->fc_flag & FC_PT2PT_PLOGI)) { @@ -423,17 +478,22 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, if (phba->sli_rev == LPFC_SLI_REV4) lpfc_issue_reg_vfi(vport); else { - mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (mbox == NULL) + defer_acc = 1; + link_mbox = mempool_alloc(phba->mbox_mem_pool, + GFP_KERNEL); + if (!link_mbox) goto out; - lpfc_config_link(phba, mbox); - mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - mbox->vport = vport; - rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); - if (rc == MBX_NOT_FINISHED) { - mempool_free(mbox, phba->mbox_mem_pool); + lpfc_config_link(phba, link_mbox); + link_mbox->mbox_cmpl = lpfc_defer_pt2pt_acc; + link_mbox->vport = vport; + link_mbox->ctx_ndlp = ndlp; + + save_iocb = lpfc_sli_get_iocbq(phba); + if (!save_iocb) goto out; - } + /* Save info from cmd IOCB used in rsp */ + memcpy((uint8_t *)save_iocb, (uint8_t *)cmdiocb, + sizeof(struct lpfc_iocbq)); }
lpfc_can_disctmo(vport); @@ -448,8 +508,8 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_flag |= NLP_SUPPRESS_RSP; }
- mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mbox) + login_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!login_mbox) goto out;
/* Registering an existing RPI behaves differently for SLI3 vs SLI4 */ @@ -457,21 +517,19 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, lpfc_unreg_rpi(vport, ndlp);
rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID, - (uint8_t *) sp, mbox, ndlp->nlp_rpi); - if (rc) { - mempool_free(mbox, phba->mbox_mem_pool); + (uint8_t *)sp, login_mbox, ndlp->nlp_rpi); + if (rc) goto out; - }
/* ACC PLOGI rsp command needs to execute first, - * queue this mbox command to be processed later. + * queue this login_mbox command to be processed later. */ - mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login; + login_mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login; /* - * mbox->ctx_ndlp = lpfc_nlp_get(ndlp) deferred until mailbox + * login_mbox->ctx_ndlp = lpfc_nlp_get(ndlp) deferred until mailbox * command issued in lpfc_cmpl_els_acc(). */ - mbox->vport = vport; + login_mbox->vport = vport; spin_lock_irq(shost->host_lock); ndlp->nlp_flag |= (NLP_ACC_REGLOGIN | NLP_RCV_PLOGI); spin_unlock_irq(shost->host_lock); @@ -506,16 +564,47 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, stat.un.b.lsRjtRsnCode = LSRJT_INVALID_CMD; stat.un.b.lsRjtRsnCodeExp = LSEXP_NOTHING_MORE; rc = lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, - ndlp, mbox); + ndlp, login_mbox); if (rc) - mempool_free(mbox, phba->mbox_mem_pool); + mempool_free(login_mbox, phba->mbox_mem_pool); return 1; } - rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox); + if (defer_acc) { + /* So the order here should be: + * Issue CONFIG_LINK mbox + * CONFIG_LINK cmpl + * Issue PLOGI ACC + * PLOGI ACC cmpl + * Issue REG_LOGIN mbox + */ + + /* Save the REG_LOGIN mbox for and rcv IOCB copy later */ + link_mbox->context3 = login_mbox; + login_mbox->context3 = save_iocb; + + /* Start the ball rolling by issuing CONFIG_LINK here */ + rc = lpfc_sli_issue_mbox(phba, link_mbox, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) + goto out; + return 1; + } + + rc = lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, login_mbox); if (rc) - mempool_free(mbox, phba->mbox_mem_pool); + mempool_free(login_mbox, phba->mbox_mem_pool); return 1; out: + if (defer_acc) + lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY, + "4577 pt2pt discovery failure: %p %p %p\n", + save_iocb, link_mbox, login_mbox); + if (save_iocb) + lpfc_sli_release_iocbq(phba, save_iocb); + if (link_mbox) + mempool_free(link_mbox, phba->mbox_mem_pool); + if (login_mbox) + mempool_free(login_mbox, phba->mbox_mem_pool); + stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; stat.un.b.lsRjtRsnCodeExp = LSEXP_OUT_OF_RESOURCE; lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, NULL);