6.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dimitri Fedrau dima.fedrau@gmail.com
[ Upstream commit 10465365f3b094ba9a9795f212d13dee594bcfe7 ]
Enabling of the temperature sensor was moved from mv88q2xxx_hwmon_probe to mv88q222x_config_init with the consequence that the sensor is only usable when the PHY is configured. Enable the sensor in mv88q2xxx_hwmon_probe as well to fix this.
Signed-off-by: Dimitri Fedrau dima.fedrau@gmail.com Link: https://patch.msgid.link/20250512-marvell-88q2xxx-hwmon-enable-at-probe-v4-1... Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/marvell-88q2xxx.c | 103 +++++++++++++++++------------- 1 file changed, 57 insertions(+), 46 deletions(-)
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c index 23e1f0521f549..65f31d3c34810 100644 --- a/drivers/net/phy/marvell-88q2xxx.c +++ b/drivers/net/phy/marvell-88q2xxx.c @@ -119,7 +119,6 @@ #define MV88Q2XXX_LED_INDEX_GPIO 1
struct mv88q2xxx_priv { - bool enable_temp; bool enable_led0; };
@@ -482,49 +481,6 @@ static int mv88q2xxx_config_aneg(struct phy_device *phydev) return phydev->drv->soft_reset(phydev); }
-static int mv88q2xxx_config_init(struct phy_device *phydev) -{ - struct mv88q2xxx_priv *priv = phydev->priv; - int ret; - - /* The 88Q2XXX PHYs do have the extended ability register available, but - * register MDIO_PMA_EXTABLE where they should signalize it does not - * work according to specification. Therefore, we force it here. - */ - phydev->pma_extable = MDIO_PMA_EXTABLE_BT1; - - /* Configure interrupt with default settings, output is driven low for - * active interrupt and high for inactive. - */ - if (phy_interrupt_is_valid(phydev)) { - ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, - MDIO_MMD_PCS_MV_GPIO_INT_CTRL, - MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS); - if (ret < 0) - return ret; - } - - /* Enable LED function and disable TX disable feature on LED/TX_ENABLE */ - if (priv->enable_led0) { - ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, - MDIO_MMD_PCS_MV_RESET_CTRL, - MDIO_MMD_PCS_MV_RESET_CTRL_TX_DISABLE); - if (ret < 0) - return ret; - } - - /* Enable temperature sense */ - if (priv->enable_temp) { - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - MDIO_MMD_PCS_MV_TEMP_SENSOR2, - MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0); - if (ret < 0) - return ret; - } - - return 0; -} - static int mv88q2xxx_get_sqi(struct phy_device *phydev) { int ret; @@ -667,6 +623,12 @@ static int mv88q2xxx_resume(struct phy_device *phydev) }
#if IS_ENABLED(CONFIG_HWMON) +static int mv88q2xxx_enable_temp_sense(struct phy_device *phydev) +{ + return phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TEMP_SENSOR2, + MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0); +} + static const struct hwmon_channel_info * const mv88q2xxx_hwmon_info[] = { HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_ALARM), NULL @@ -762,11 +724,13 @@ static const struct hwmon_chip_info mv88q2xxx_hwmon_chip_info = {
static int mv88q2xxx_hwmon_probe(struct phy_device *phydev) { - struct mv88q2xxx_priv *priv = phydev->priv; struct device *dev = &phydev->mdio.dev; struct device *hwmon; + int ret;
- priv->enable_temp = true; + ret = mv88q2xxx_enable_temp_sense(phydev); + if (ret < 0) + return ret;
hwmon = devm_hwmon_device_register_with_info(dev, NULL, phydev, &mv88q2xxx_hwmon_chip_info, @@ -776,6 +740,11 @@ static int mv88q2xxx_hwmon_probe(struct phy_device *phydev) }
#else +static int mv88q2xxx_enable_temp_sense(struct phy_device *phydev) +{ + return 0; +} + static int mv88q2xxx_hwmon_probe(struct phy_device *phydev) { return 0; @@ -853,6 +822,48 @@ static int mv88q222x_probe(struct phy_device *phydev) return mv88q2xxx_hwmon_probe(phydev); }
+static int mv88q2xxx_config_init(struct phy_device *phydev) +{ + struct mv88q2xxx_priv *priv = phydev->priv; + int ret; + + /* The 88Q2XXX PHYs do have the extended ability register available, but + * register MDIO_PMA_EXTABLE where they should signalize it does not + * work according to specification. Therefore, we force it here. + */ + phydev->pma_extable = MDIO_PMA_EXTABLE_BT1; + + /* Configure interrupt with default settings, output is driven low for + * active interrupt and high for inactive. + */ + if (phy_interrupt_is_valid(phydev)) { + ret = phy_set_bits_mmd(phydev, MDIO_MMD_PCS, + MDIO_MMD_PCS_MV_GPIO_INT_CTRL, + MDIO_MMD_PCS_MV_GPIO_INT_CTRL_TRI_DIS); + if (ret < 0) + return ret; + } + + /* Enable LED function and disable TX disable feature on LED/TX_ENABLE */ + if (priv->enable_led0) { + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, + MDIO_MMD_PCS_MV_RESET_CTRL, + MDIO_MMD_PCS_MV_RESET_CTRL_TX_DISABLE); + if (ret < 0) + return ret; + } + + /* Enable temperature sense again. There might have been a hard reset + * of the PHY and in this case the register content is restored to + * defaults and we need to enable it again. + */ + ret = mv88q2xxx_enable_temp_sense(phydev); + if (ret < 0) + return ret; + + return 0; +} + static int mv88q2110_config_init(struct phy_device *phydev) { int ret;