There are platforms which don't provide input clock rate but provide I2C timing parameters. Commit 3bd4f277274b ("i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master()") causes needless warning during probe on those platforms since i2c_dw_clk_rate(), which causes the warning when input clock is unknown, is called even when there is no need to calculate timing parameters.
Fixes: 3bd4f277274b ("i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master()") Reported-by: Ard Biesheuvel ard.biesheuvel@linaro.org Cc: stable@vger.kernel.org # 4.19 Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com --- for current 4.19-rc6. I Cc'ed stable just in case this doesn't hit the v4.19. --- drivers/i2c/busses/i2c-designware-master.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 94d94b4a9a0d..18cc324f3ca9 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -34,11 +34,11 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) { - u32 ic_clk = i2c_dw_clk_rate(dev); const char *mode_str, *fp_str = ""; u32 comp_param1; u32 sda_falling_time, scl_falling_time; struct i2c_timings *t = &dev->timings; + u32 ic_clk; int ret;
ret = i2c_dw_acquire_lock(dev); @@ -53,6 +53,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
/* Calculate SCL timing parameters for standard mode if not set */ if (!dev->ss_hcnt || !dev->ss_lcnt) { + ic_clk = i2c_dw_clk_rate(dev); dev->ss_hcnt = i2c_dw_scl_hcnt(ic_clk, 4000, /* tHD;STA = tHIGH = 4.0 us */ @@ -89,6 +90,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) * needed also in high speed mode. */ if (!dev->fs_hcnt || !dev->fs_lcnt) { + ic_clk = i2c_dw_clk_rate(dev); dev->fs_hcnt = i2c_dw_scl_hcnt(ic_clk, 600, /* tHD;STA = tHIGH = 0.6 us */